(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Point Taps（Tool Material Type：Powder high-speed steel）
[What is a point tap?]
It is a groove-shaped cutting tap that discharges chips in the tap traveling direction, and is ideal for machining "through holes". It is characterized by low cutting torque as there are few obstacles to the chips. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.0UN
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNJ
- No.10-32UNF
- No.10-24UNC
- No.12UN
- No.2
- No.2UN
- No.3
- No.3UN
- No.4
- No.4UN
- No.4-40UNC
- No.5
- No.5UN
- No.5-40UNC
- No.6
- No.6UN
- No.6UNJ
- S0.6
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- No.8-32UNC
- S0.9
- 1
- 1UN
- G1
- M1
- W1
- 1"1/2UN
- W1"1/2
- 1 1/4
- 1"1/4UN
- W1"1/4
- 1 1/8
- 1"1/8UN
- W1"1/8
- 1/2
- 1/2UN
- 1/2UNJ
- G1/2
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- W1"3/4
- 1"3/8UN
- W1"3/8
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- W1"5/8
- W1"7/8
- 1/8UN
- G1/8
- SM1/8
- W1/8
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- 2
- M2
- M2.0
- W2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- M3
- STI M3
- 3/4
- 3/4UN
- G3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- G3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/32
- SM3/32
- W3/32
- M3.5
- 4M
- M4
- M4.0
- M4
- STI M4
- M4.5
- 5M
- M5
- M5.0
- M5
- STI M5
- 5/8
- 5/8UN
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16
- 5/16UN
- 5/16UNJ
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- 6UN
- M6
- M6.0
- M6
- STI M6
- M7
- 7/8
- 7/8UN
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16
- 7/16UN
- 7/16UNJ
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/32
- W7/32
- 8UN
- M8
- M8.0
- M8
- STI M8
- M9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- 10UN
- M10
- M10.0
- M10
- STI M10
- M11
- 11/64
- SM11/64
- M12
- M12.0
- M12
- STI M12
- M13
- M14
- M14.0
- M14
- M15
- SM15/64
- M16
- M16.0
- M16
- M17
- M18
- M18
- M19
- M20
- M20
- M22
- M22
- M23
- M24
- M24
- M25
- M26
- M27
- M28
- M30
- M32
- M33
- M35
- M36
- M38
- M39
- M40
- M42
- M45
- M48
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 19 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.From: ฿ 552.00 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, Metric DIN 371
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 718.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Pointed Tap for Titanium Alloy V-TI-POT
OSG
Enables processing with high durability, efficiency, and stability in titanium alloy (Ti-6Al-4V, etc.) of 40 to 45 HRC aged after undergoing a solution heat treatment, used in such fields as aircraft, aerospace, and chemical industriesFrom: ฿ 887.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRCFrom: ฿ 298.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Pointed Tap with Long Shank_CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRCFrom: ฿ 723.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.From: ฿ 1,000.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Point Tap, Ni-Based Super Heat Resistant Alloys, NI-POT-M12/-NO10, 3 Grooves
OSG
Exerts power in Ni-base heat-resistant alloy (Inconel® 718, etc.) of 40 to 45 HRC aged after undergoing a solution heat treatment, used in such fields as aircraft, aerospace, and chemical industriesFrom: ฿ 527.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, UNC DIN 2184-1
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 787.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT
OSG
The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)From: ฿ 814.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
WALTER PROTOTYP
Suitable for high precision blind-hole and through-hole thread processing up to screw depths of 3 x D. Suitable for short chipping materials of 100-1,000 N/mm² and up to 32 HRC.From: ฿ 1,863.00 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
WALTER PROTOTYP
Suitable for high precision through-hole thread processing up to screw depths of 2 x D. Suitable for long chipping materials of 700-1,400 N/mm² and up to 44 HRC.From: ฿ 630.04 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Nickel Base Alloys_ZEN-P
YAMAWA MFG
■ The tap is produced from high grade powder high speed steel material that has excellent heat resistance and abrasion resistance properties.
■ Cutting edge geometry is designed to accommodate for thread shrinkage and the high temperature of difficult to machine materials.
■Utilizes the appropriate flute shape and rake angles for nickel base alloy to allow a smooth discharge of chips.
■YAMAWA uses the ideal surface treatment to prevent chip welding and abrasion.
■Compensating for diameter shrinkage of the internal screw thread, the tap is produced moderately oversize.From: ฿ 601.49 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, Metric DIN 376
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 1,411.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, Metric DIN 374
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 843.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, UNF DIN 2184-1
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 1,096.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 371
OSG
Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.From: ฿ 1,233.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 374
OSG
Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.From: ฿ 1,273.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 376
OSG
Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.From: ฿ 1,273.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 701.57 Days to Ship:
10 Day(s)
10 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | WALTER PROTOTYP | WALTER PROTOTYP | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG |
| Product Series | Spiral Point Tap, Ni-Based Super Heat Resistant Alloys, NI-POT-M12/-NO10, 3 Grooves | HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 371 | HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 374 | HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 376 | |||||||||||||||
| From | ฿ 552.00 | ฿ 718.00 | ฿ 887.00 | ฿ 298.00 Special Price On Sale Until 30/06/2024 | ฿ 723.00 | ฿ 1,000.00 | ฿ 527.00 | ฿ 787.00 | ฿ 814.00 | ฿ 1,863.00 | ฿ 630.04 | ฿ 601.49 | ฿ 1,411.00 | ฿ 843.00 | ฿ 1,096.00 | ฿ 1,233.00 | ฿ 1,273.00 | ฿ 1,273.00 | ฿ 701.57 |
| Days to Ship | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 12 Day(s) | 12 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 10 Day(s) |
| Screw size (Nominal) | No.10-32UNF ～ M24 | - | No.10UNJ ～ M12 | M1.4 ～ M48 | M3 ～ M24 | M2 ～ M24 | No.10UNJ ～ M12 | - | No.10UNJ ～ M12 | M8 | M4 ～ M6 | M3 ～ M20 | - | - | - | - | - | - | M3 ～ M16 |
| Screw Types | Meter / unified | - | Meter / unified | Meter | Meter | Meter | Meter / unified | - | Meter / unified | Meter | Meter | Meter | - | - | - | - | - | - | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Titanium Alloy (Ti-6Al-4V, etc)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Nickel-based alloy (Inconel, etc.)[◎] | - | Nickel-based alloy (Inconel, etc.)[◎] | Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | - | - | - | - | - | Stainless steel (SUS)[○] |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 3 | - | 0.5 ～ 40 | 0.3 ～ 5 | 0.5 ～ 3 | 0.25 ～ 3 | 0.5 ～ 40 | - | 0.5 ～ 32 | 1.25 | 0.7 ～ 1 | 0.5 ～ 2.5 | - | - | - | - | - | - | - |
| Tool Material Type | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel |
| Tap Type | Point tap | - | Point tap | Point tap | Point tap | Point tap | Point tap | - | Point tap | Point tap | Point tap | Point tap | - | - | - | - | - | - | Point tap |
| Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
| Chamfer threads (Lcf) | 5P | - | 5P | 5P | 5P | 5P | 5P | - | 5P | - | - | 4.5P | - | - | - | - | - | - | - |
| Coating Type | Other | - | TiCN | Non-Coated | Non-Coated | Other | Non-Coated | - | Other | Non-Coated | Non-Coated | - | - | - | - | - | - | - | Other |
| Coating Y/N | Available | - | Available | NA | NA | Available | NA | - | Available | NA | NA | NA | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | 34 ～ 120 | 56 ～ 100 | 46 ～ 85 | 34 ～ 185 | 100 ～ 200 | 80 ～ 200 | 46 ～ 85 | 56 ～ 160 | 46 ～ 85 | 70 | 52 ～ 62 | 46 ～ 105 | 110 ～ 160 | 80 ～ 140 | 56 ～ 140 | 80 ～ 100 | 90 ～ 110 | 100 ～ 125 | 56 ～ 110 |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?