(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 16/6/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Screw-Hole-Related Tools（Coating Type：TiCN）
Search by specifying the lower class category
-
Hand Taps
-
Spiral Taps
-
Point Taps
-
Roll Taps
-
Taps for Pipes
-
Thread Cutters
-
Thread-Cutting-Related Tools
-
Dies
-
Tap Wrenches
-
Modification/Removal Tools
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- No0UN
- NO.0-80UNF
- (NO.0) FOR TAPS : M1-8 , 1/16-1/4
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNJ
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- (NO.1.1/2) FOR TAPS : M1-12 , 1/16-1/2 , G1/8
- (NO.1) FOR TAPS : M1-10 , 1/16-3/8 , G1/8
- (NO.1) FOR TAPS : M3-10 , 1/8-3/8
- (NO.10) FOR TAPS : M3-10 , 1/8-3/8
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- (NO.2) FOR TAPS : M4-12 , 5/32-1/2 , G1/8
- (NO.20) FOR TAPS : M5-12 , 7/32-1/2
- (NO.2) FOR TAPS : M5-12 , 7/32-1/2
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- (NO.3) FOR TAPS : M5-20 , 7/32-3/4 , G1/8-1/2
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- (NO.4) FOR TAPS : M11-27 , 7/16-1" , G1/4-3/4
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- (NO.5L) FOR TAPS : M13-32 , 1/2-1.1/4 , G1/4-1"
- 0.6
- No.6
- No.6UN
- No.6UNJ
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- No.8UNJ
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- BC1
- G1
- M1
- M1.0
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PS1
- PS 1
- PT1
- PT 1
- R1
- Rc1
- Rp1
- S1
- UNC1
- UNF1
- W1
- Ø : 1"
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2U
- 1"1/2UN
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4U
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2UN
- 1/2UNJ
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1 3/8
- 1"3/8U
- 1"3/8UN
- BSF1"3/8
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1 to 6
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1'W8
- 1/8
- 1/8UN
- 1/8 BSP
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1 9/16
- M1 to 10
- M1～10
- 1'11.5
- 1 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPTF1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- M1.1
- Ø : 1.1/2"
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- BC1.37
- M1.4
- S1.4
- 1.45
- 1.5
- Ø : 1.5/16"
- M1.6
- M1.7
- M1.8
- 2
- 2U
- 2UN
- BSF2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- PT 2
- R2
- Rp2
- W2
- Ø : 2"
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2'1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- W2"1/4
- 2"3/4UN
- W2"3/4
- M2 to 4.5
- M2～10
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- 3UN
- G3
- M3
- M3.0
- M3
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- STI M3
- W3
- Ø : 3"
- 3'-11
- 3'-8
- 3 1/2
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS3/4
- PS 3/4
- PT 3/4
- R3/4
- Rc3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- BC3/8
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/32
- SM3/32
- W3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- 4UN
- G4
- M4
- M4.0
- M4
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- STI M4
- Ø : 4"
- 4'-11
- M4 to 6
- M4～10
- M4 to 13
- M4～13
- M4～14
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- No5UN
- STI M5
- 5/1
- 5 to 8 mm
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5～10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5.5M
- M5.5
- M5.5
- 6
- 6UN
- M6
- M6.0
- M6
- No6UN
- STI M6
- W6
- No6-40UNF
- M6 to 20
- W6.8
- M7
- M7
- PG7
- W7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- 7/32UN
- SM7/32
- W7/32
- 7.5
- 8
- 8UN
- M8
- M8.0
- M8
- No8UN
- STI M8
- TV8
- W8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- BC9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M9.5
- W9.5
- W9.8
- 10
- 10UN
- M10
- M10.0
- M10
- No10UN
- STI M10
- Tr 10
- W10
- M10 to 13
- M10 to 25
- M10～25
- 11
- M11
- M11
- PG11
- W11
- 11/16
- W11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- No12UN
- STI M12
- Tr 12
- W12
- W12.5
- 13
- M13
- W13
- W13/16
- Ø : 13/16"
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- M14
- Tr 14
- W14
- 15
- M15
- W15
- W15/16
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- W16
- Øxmm : 16X5 , FOR ROUND DIES : M1-2.6 , BSW1/16-3/32
- 17
- M17
- W17
- M18
- M18
- Tr 18
- W18
- 19
- M19
- W19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr20
- Tr 20
- W20
- Øxmm : 20X5 , FOR ROUND DIES : M3-4 , BSW1/8-5/32
- Øxmm : 20X7 , FOR ROUND DIES : M4.5-6 , BSW3/16-1/4
- W20.32
- M21
- PG21
- W21
- 22
- M22
- M22
- M22X
- Tr 22
- W22
- M23
- W23
- M24
- M24
- M24X
- Tr 24
- W24
- 25
- M25
- M25X
- Tr 25
- W25
- Øxmm : 25X9 , FOR ROUND DIES : M7-9 , BSW5/16
- M25 to 50
- M25 to 70
- M26
- Tr 26
- W26
- M27
- W27
- 28
- M28
- Tr 28
- W28
- PG29
- W29
- M30
- Tr 30
- W30
- Øxmm : 30X11 , FOR ROUND DIES : M10-11 , BSW3/8-7/16
- 31
- 31/32
- M32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- 36
- M36
- PG36
- W36
- M37
- M38
- W38
- Øxmm : 38X10 , FOR ROUND DIES : Mf12-15 , G1/4
- Øxmm : 38X14 , FOR ROUND DIES : M12-14 , BSW1/2-9/16
- 39
- M39
- W39
- M40
- W40
- 42
- M42
- PG42
- W42
- M44
- W44
- M45
- W45
- Øxmm : 45X14 , FOR ROUND DIESV: Mf16-20 , G3/8-1/2
- Øxmm : 45X18 , FOR ROUND DIES : M16-20 , BSW5/8-13/16
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- W54
- M55
- W55
- Øxmm : 55X16 , FOR ROUND DIES : Mf22-26 , G5/8-3/4
- Øxmm : 55X22 , FOR ROUND DIES : M22-24 , BSW7/8-1"
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- Øxmm : 65X18 , FOR ROUND DIES : Mf27-36 , G7/8-1"
- Øxmm : 65X25 , FOR ROUND DIES : M27-36 , BSW1.1/8-1.3/8
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M80
- M85
- M90
- M95
- M100
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.7
- 1.75
- 1.8
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 55 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higherFrom: ฿ 2,779.00 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 623.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.From: ฿ 765.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Spiral Tap V Coated_VP-SFT
OSG
Optimal for processing steel alloy pre-hardened steel of 35 to 42 HRC.
Tool Material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Work material: General steel / heat-treated steel
Coating: Surface treatment for steelFrom: ฿ 576.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.
Work material: High hardness steel to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3From: ฿ 4,059.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT
OSG
Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.From: ฿ 654.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.From: ฿ 580.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,757.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Dry Tapping, Coated_OL+RZ
YAMAWA MFG
■ The OL+RZ/OL-RZ roll taps have made it possible tapping without lubrication in the sizes M6 and smaller. These taps aredesigned for thin steel sheet screw threads or steel with a relatively short screw thread length.
■ Increased shank accuracy and an optimum lobe portion design produces a smooth thread forming action and the internal threadaccuracy is stabilized even under severe conditions.
■For blind hole tapping, please select the HP + RZ / HP-RZ tap series as an alternative item.From: ฿ 622.99 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 42 to 52 HRC. In order to maximize the properties of the base material, V coating with excellent abrasion resistance has been applied to the surface.From: ฿ 1,031.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
For Pointed Tap for Titanium Alloy V-TI-POT
OSG
Enables processing with high durability, efficiency, and stability in titanium alloy (Ti-6Al-4V, etc.) of 40 to 45 HRC aged after undergoing a solution heat treatment, used in such fields as aircraft, aerospace, and chemical industriesFrom: ฿ 887.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT
OSG
V (composite multi-layer coating) achieves high durability.
Work material: General steel / stainless steel / aluminum / copper
Coating: Surface treatment for steelFrom: ฿ 1,060.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT
OSG
Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.From: ฿ 813.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide tap with a TiCN coating treatment applied to the carbide base metal.
[Features]
· Excellent abrasion resistance and adhesion resistance.
· Improved chip discharge performance and service life.
[Applications]
· Ideal for mass tapping of aluminum and cast iron, etc.From: ฿ 4,810.32 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless Tap with Internal Coolant Supply (X Performer)_OIL-S-XPF
OSG
In addition to the performance of S-XPF, excellent lubrication and cooling effects are provided by an oil hole placed in each oil groove, simultaneously achieving high speed, high efficiency and high durability.From: ฿ 1,757.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,356.16 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,975.00 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]
· Suitable for long life thread processing of aluminum and cast iron.From: ฿ 5,939.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]
·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditionsFrom: ฿ 580.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
ULTRA Synchro Spiral Tap with Internal Coolant Supply for Steels_VPO-US-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed female threading of carbon steel at 50 m/min or more.From: ฿ 1,198.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap・Zero Tap for Die Castings with Internal Coolant Supply_VO-DC-HT
OSG
Excellent power for processing aluminum alloy castings etc. by using machines with perfect synchronous feed mechanism with rake angle 0° and strong cutting edgeFrom: ฿ 1,222.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series V Coating V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tappingFrom: ฿ 576.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap V coated with Long Shank_V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tappingFrom: ฿ 914.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 766.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 788.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 758.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type with long Shank_VP-LT-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 959.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP
YAMAWA MFG
■ A center through coolant hole tap that can be used at ultra high speed and is compatiblewith internal lubrication in horizontal processing.
■ The low helix flutes, making it the optimum tap for materials such as aluminumalloy, magnesium alloy and zinc alloy castings.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
■ The HP+RZ/HP-RZ roll taps are suitable for processing steel materials with a hardness of 35 HRC or lessand light alloys. These roll taps are recommended for high speed machining 20 to 50 m / min.
■Roll form processing of stainless steel and thermal refined materials up to 40 HRC are now possible.
■ The roll form tapping torque has been reduced by 20% or more, making it possible to significantlyimprove tool life compared with conventional roll form tap products.
■The HP+RZ/HP-RZ taps make it possible to use a water soluble cutting fluid.From: ฿ 775.40 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,523.00 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Tap V coated with Long Shank_V-LT-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.From: ฿ 1,092.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap・Zero Tap for Die Castings_VP-DC-HT
OSG
Excellent power for processing aluminum alloy castings etc. by using machines with perfect synchronous feed mechanism with rake angle 0° and strong cutting edgeFrom: ฿ 909.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.From: ฿ 1,901.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT
OSG
Excellent for hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC to 60 HRC or higherFrom: ฿ 8,740.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Taper Pipe Thread Tap V coated for Aluminum Alloy_V-AL-TPT
OSG
Ideal for machining tapered female screws in aluminum alloy pipe, where the internal threading has a tendency to gougeFrom: ฿ 1,079.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 959.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap V coated with Cutting Edge on Minor Dia. (EG-NRT)_V-EG-NRT
OSG
Even if the diameters of pilot holes vary due to bore cutting during forward operation, it does not over-roll, making management of the hole diameter easy. By selecting the pilot hole diameter, it is possible to remove broken ridges from female threads.From: ฿ 956.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
INOX Spiral Tap (TICN Coating)
WALTER PROTOTYP
Suitable for high precision blind-hole thread processing up to screw depths of 2.5 x D. Suitable for long chipping materials of 350-1,200 N/mm² and up to 36 HRC.From: ฿ 2,180.00 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
WALTER PROTOTYP
Suitable for high precision through-hole thread processing up to screw depths of 3 x D. Suitable for long chipping materials of 350-1,200 N/mm² and up to 36 HRC.From: ฿ 1,508.33 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 853.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,145.70 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
IT-Toughlet Miniature TiCN Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,924.84 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
IT-Toughlet Miniature TiCN Coated Long
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 2,299.33 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Cold-forming tap with correct chamfer without pitch and angle errors.From: ฿ 1,717.31 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737
GUHRING
[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.From: ฿ 9,288.00 Days to Ship:
24 Day(s)
24 Day(s)
-
You can add up to 6 items per a category to the compare list.
Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133
GUHRING
[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.From: ฿ 7,205.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Machine Tap _Paradur HSC 8041056/8046056
WALTER PROTOTYP
Carbide, cutting blade shape C = 2 to 3 pitch, 15° torsion angle, for work materials from 25 to 55 N/mm2 or 44 HRC, for work materials with long or short cutting chipsFrom: ฿ 18,172.00 Special Price Days to Ship:
25 Day(s)
25 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP
YAMAWA MFG
■ Designed with a through center hole for coolant lubrication, mist lubrication or air blast applications in blind holes.
■ The low helix flutes, making it the optimum tap for blind hole tapping on horizontal and vertical machines in materials such ascarbon steel and alloy steel.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ Ultra high-speed machining with mist or dry tappingmachining are possible with a side coolant hole shape.
■ The left hand spiral flute shape makes it the perfect tapping forvertical or horizontal machining in carbon steel and alloy steel in through hole applications.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS
YAMAWA MFG
■ A center through coolant hole tap that can be used at ultra high speed and is compatiblewith internal lubrication processing.
■ The high helix flutes, making it the optimum tap for materials such as aluminumalloy, magnesium alloy and zinc alloy castings.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS
YAMAWA MFG
■ A center through coolant hole tap that can be used at ultra high speed and is compatiblewith internal lubrication processing.
■ The high helix flutes, making it the optimum tap for materials such as carbon steels and alloy steels.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP
YAMAWA MFG
■ A center through coolant hole tap that can be used at ultra high speed and is compatiblewith internal lubrication processing.
■ The low helix flutes, making it the optimum tap for materials such as carbon steels and alloy steels.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP
YAMAWA MFG
■ Designed with a through center hole for coolant lubrication, mist lubrication or air blast applications in blind holes.
■ The low helix flutes, making it the optimum tap for blind hole tapping on horizontal and verticalmachines in materials such as aluminum castings, magnesium alloys and zinc alloys.From: ฿ 1,011.14 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
■ High quality internal threading with fewer burrs canbe produced with better tool life.
■ Roll form processing into materials with low ductilityis now possible.
■Tool life with water soluble cutting fluid is increased.
■ The SC-TL-RZ offers high speed processing into:Stainless steel: SUS303, SUS304, SUS316, SUS440C ·Alloy steel: SCM420 · Carbon steel: S45C 〜 S50C ·Aluminum casting · Aluminum die castingFrom: ฿ 905.82 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Tap Claw Tap 300 TiCN Coating (for metal screws)
SANDVIK
Taps are available for each work material, making selection easy.
Hole type: For blind holes
Coating: Surface treatment for steelFrom: ฿ 944.62 Days to Ship:
Same day
Same day
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | NACHI(FUJIKOSHI) | OSG | YAMAWA MFG | OSG | OSG | OSG | OSG | NACHI(FUJIKOSHI) | OSG | TANOI MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | WALTER PROTOTYP | WALTER PROTOTYP | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | GUHRING | GUHRING | WALTER PROTOTYP | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | SANDVIK |
| Product Series | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT | Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT | Fluteless Tap with Internal Coolant Supply (X Performer)_OIL-S-XPF | ULTRA Synchro Spiral Tap with Internal Coolant Supply for Steels_VPO-US-SFT | Straight Flutes Tap・Zero Tap for Die Castings with Internal Coolant Supply_VO-DC-HT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type with long Shank_VP-LT-SC-NRT | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP | Spiral Fluted Tap for Through Hole On Medium Hardness Carbon Steel for MHSL Meter Screw | Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT | Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Fluteless (Nu-Roll) Tap V coated with Cutting Edge on Minor Dia. (EG-NRT)_V-EG-NRT | Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737 | Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133 | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS | For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS | For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP | For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP | |||||||||||||||||||||||||||||||||
| From | ฿ 2,779.00 Special Price On Sale Until 30/06/2024 | ฿ 623.00 | ฿ 765.00 Special Price On Sale Until 30/06/2024 | ฿ 576.00 | ฿ 4,059.00 | ฿ 654.00 | ฿ 580.00 | ฿ 1,757.00 | ฿ 622.99 | ฿ 1,031.00 | ฿ 887.00 | ฿ 1,060.00 | ฿ 813.00 | ฿ 4,810.32 | ฿ 1,757.00 | ฿ 1,356.16 | ฿ 1,975.00 | ฿ 5,939.00 | ฿ 580.00 | ฿ 1,198.00 | ฿ 1,222.00 | ฿ 576.00 | ฿ 914.00 | ฿ 766.00 | ฿ 788.00 | ฿ 758.00 | ฿ 959.00 | ฿ 1,011.14 | ฿ 775.40 | ฿ 1,523.00 | ฿ 1,092.00 | ฿ 909.00 | ฿ 1,901.00 Special Price On Sale Until 30/06/2024 | ฿ 8,740.00 Special Price On Sale Until 30/06/2024 | ฿ 1,079.00 | ฿ 959.00 | ฿ 956.00 | ฿ 2,180.00 | ฿ 1,508.33 | ฿ 853.83 | ฿ 1,145.70 | ฿ 1,924.84 | ฿ 2,299.33 | ฿ 1,717.31 | ฿ 9,288.00 | ฿ 7,205.00 | ฿ 18,172.00 Special Price On Sale Until 30/06/2024 | ฿ 1,011.14 | ฿ 1,011.14 | ฿ 1,011.14 | ฿ 1,011.14 | ฿ 1,011.14 | ฿ 1,011.14 | ฿ 905.82 | ฿ 944.62 |
| Days to Ship | Same day | Same day | Same day | Same day | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | 5 Day(s) | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | 14 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | Same day | Same day | 5 Day(s) | Same day | 19 Day(s) | Same day | 12 Day(s) | Same day | 5 Day(s) | Same day | Same day | 5 Day(s) | Same day | 5 Day(s) | 12 Day(s) | 12 Day(s) | 5 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 5 Day(s) | 24 Day(s) | 5 Day(s) | 25 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | Same day | Same day |
| Screw size (Nominal) | M3 ～ M12 | No.2UN ～ M12 | M1 ～ M45 | M3 ～ M12 | M3 ～ M12 | M1 ～ M20 | M1.4 ～ M24 | M3 ～ M12 | No.10 ～ M6 | M3 ～ M12 | No.10UNJ ～ M12 | M2 ～ M6 | M1.4 ～ M6 | M3 ～ M12 | M6 ～ M16 | M2 ～ M20 | No.2 ～ No.6 | M4 ～ M12 | M2 ～ M24 | M6 ～ M12 | M6 ～ M12 | M3 ～ M12 | M6 | No.2UN ～ M3 | No.2UN ～ M6 | M1 ～ M2.6 | No.2UN ～ M6 | M6 ～ M20 | No.10-32UNF ～ M20 | M6 ～ M16 | M3 ～ M8 | M6 ～ M12 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | No.2UN ～ M12 | M3 ～ M12 | M4 | M4 ～ M5 | M1 ～ M10 | M1 ～ M10 | S0.5 ～ S0.9 | S0.5 ～ S0.9 | M4 ～ M8 | M6 ～ M20 | M6 ～ M20 | M6 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M1 ～ M6 | M4 ～ M16 |
| Screw Types | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter / unified | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / unified | Meter / unified | Meter | Meter / unified | Meter | Meter / unified | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter / unified | Meter | Meter | Meter | Meter | Meter | Miniature | Miniature | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Titanium Alloy (Ti-6Al-4V, etc)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | High Hardness Steel (50-60 HRC)[◎] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 1.75 | 0.25 ～ 56 | 0.2 ～ 4.5 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.25 ～ 2.5 | 0.25 ～ 3 | 0.5 ～ 1.75 | 0.25 ～ 64 | 0.5 ～ 1.75 | 0.5 ～ 40 | 0.4 ～ 1 | 0.3 ～ 1 | 0.5 ～ 1.75 | 1 ～ 1.75 | 0.4 ～ 2.5 | 0.45 ～ 0.79 | 0.7 ～ 1.75 | 0.25 ～ 3 | 1 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 1.25 | 1 | 0.25 ～ 56 | 0.25 ～ 56 | 0.25 ～ 0.45 | 0.25 ～ 56 | 1 ～ 1.75 | 0.25 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 1.25 | 1 ～ 1.75 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 | 0.25 ～ 56 | 0.5 ～ 1.75 | 0.7 | 0.7 ～ 0.8 | 0.2 ～ 1.5 | 0.2 ～ 1.5 | 0.125 ～ 0.225 | 0.125 ～ 0.225 | 0.7 ～ 1.25 | 1 ～ 2.5 | 1 ～ 2.5 | 1 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 0.2 ～ 1 | 0.7 ～ 2 |
| Tool Material Type | Carbide | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | Powder high-speed steel | Carbide | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | Carbide | Alloy HSS | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | - |
| Tap Type | Hand Tap | Roll tap | Roll tap | Spiral Tap | Hand Tap | Roll tap | Point tap | Spiral Tap | Roll tap | Hand Tap | Point tap | Roll tap | Roll tap | Hand Tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Roll tap | Spiral Tap | Spiral Tap | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes | Roll tap | Roll tap | Spiral Tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Thread cutter | Thread cutter | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap |
| Hole type | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For through hole | For through hole / For blind hole | For through hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | - | - | - | - | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole |
| Chamfer threads (Lcf) | 3P | 2P ～ 4P | 2P ～ 4P | 2.5P | 2.5P ～ 5P | 2P | 5 | 2.5P | 4P | 2.5P ～ 5P | 5P | 2P | 8P | 1.5P ～ 3P | 2P | 1P ～ 2P | 2P | 2.5 | 2.5 | 3P | 1.5P | 5P | 5P | 2P | 1P | 2P | 1P | 2.5P | 2P ～ 4P | 5P ～ 7P | 2.5P | 1.5P | 3P | 3P | 2.5P | 2P ～ 4P | 2P ～ 4P | - | - | 1P ～ 4P | 1P ～ 4P | 1P ～ 2P | 1P ～ 2P | 1P ～ 2P | - | - | 2～3P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 1P | 2P |
| Coating Type | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Overall Length (L)(mm) | 46 ～ 82 | 30 ～ 82 | 30 ～ 220 | 46 ～ 82 | 46 ～ 82 | 30 ～ 105 | 34 ～ 120 | 57 ～ 111 | 36 ～ 62 | 46 ～ 82 | 46 ～ 85 | 80 ～ 120 | 34 ～ 62 | 46 ～ 82 | 62 ～ 95 | 40 ～ 105 | 42 ～ 52 | 52 ～ 82 | 40 ～ 120 | 62 ～ 82 | 62 ～ 82 | 46 ～ 82 | 100 | 30 ～ 46 | 30 ～ 62 | 30 ～ 44 | 60 ～ 100 | 62 ～ 105 | 36 ～ 105 | 62 ～ 95 | 100 | 62 ～ 82 | 59 ～ 109 | 59 ～ 87 | 55 ～ 95 | 60 ～ 200 | 46 ～ 82 | 52 | 52 ～ 60 | 30 ～ 75 | 50 ～ 150 | 30 | 50 | 70 ～ 120 | 54 ～ 102 | 54 ～ 102 | 80 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 36 ～ 62 | 52 ～ 95 |
Loading...
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?