(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 1/7/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Screw-Hole-Related Tools（Tool Material Type：High-speed steel）
Search by specifying the lower class category
-
Hand Taps
-
Spiral Taps
-
Point Taps
-
Roll Taps
-
Taps for Pipes
-
Thread Cutters
-
Thread-Cutting-Related Tools
-
Dies
-
Tap Wrenches
-
Modification/Removal Tools
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- No0UN
- NO.0-80UNF
- NO.0 FOR TAPS : M1-8 , 1/16-1/4
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNJ
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- NO.1.1/2 FOR TAPS : M1-12 , 1/16-1/2 , G1/8
- NO.1 FOR TAPS : M1-10 , 1/16-3/8 , G1/8
- (NO.1) FOR TAPS : M3-10 , 1/8-3/8
- (NO.10) FOR TAPS : M3-10 , 1/8-3/8
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- NO.2 FOR TAPS : M4-12 , 5/32-1/2 , G1/8
- (NO.20) FOR TAPS : M5-12 , 7/32-1/2
- (NO.2) FOR TAPS : M5-12 , 7/32-1/2
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.3 FOR TAPS : M5-20 , 7/32-3/4 , G1/8-1/2
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- NO.4 FOR TAPS : M11-27 , 7/16-1" , G1/4-3/4
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- NO.5 FOR TAPS : M13-32 , 1/2-1.1/4 , G1/4-1"
- NO.5L FOR TAPS : M13-32 , 1/2-1.1/4 , G1/4-1"
- 0.6
- No.6
- No.6UN
- No.6UNJ
- S0.6
- NO.6-40UNF
- No.6-32UNC
- NO.6 FOR TAPS: M18-42 , 3/4-1.1/2 , G1/2-1.1/4
- 0.7
- S0.7
- NO.7 FOR TAPS: M27-52 , 1.1/8-2" , G3/4-1.3/4
- 0.8
- No.8
- No.8UN
- No.8UNJ
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- NO.8 FOR TAPS: M27-64 , 1.1/8-3" , G3/4-3"
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- BC1
- G1
- M1
- M1.0
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PS1
- PS 1
- PT1
- PT 1
- R1
- Rc1
- Rp1
- S1
- UNC1
- UNF1
- W1
- Ø : 1"
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2U
- 1"1/2UN
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4U
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2UN
- 1/2UNJ
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PF 1/2
- PS1/2
- PS 1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1 3/8
- 1"3/8U
- 1"3/8UN
- BSF1"3/8
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS1/4
- PS 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1 to 6
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1'W8
- 1/8
- 1/8UN
- 1/8 BSP
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1 9/16
- M1 to 10
- M1～10
- 1'11.5
- 1 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- NPTF1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- M1.1
- Ø : 1.1/2"
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- BC1.37
- M1.4
- S1.4
- 1.45
- 1.5
- Ø : 1.5/16"
- M1.6
- M1.7
- M1.8
- 2
- 2U
- 2UN
- BSF2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- PT 2
- R2
- Rp2
- W2
- Ø : 2"
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2'1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- W2"1/4
- 2"3/4UN
- W2"3/4
- M2 to 4.5
- M2～10
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- 3UN
- G3
- M3
- M3.0
- M3
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- STI M3
- W3
- Ø : 3"
- 3'-11
- 3'-8
- 3 1/2
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PF 3/4
- PS3/4
- PS 3/4
- PT 3/4
- R3/4
- Rc3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- BC3/8
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PS 3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/32
- SM3/32
- W3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- 4UN
- G4
- M4
- M4.0
- M4
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- STI M4
- Ø : 4"
- 4'-11
- M4 to 6
- M4～10
- M4 to 13
- M4～13
- M4～14
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- No5UN
- STI M5
- 5/1
- 5 to 8 mm
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5～10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5.5M
- M5.5
- M5.5
- 6
- 6UN
- M6
- M6.0
- M6
- No6UN
- STI M6
- W6
- No6-40UNF
- M6 to 20
- W6.8
- M7
- M7
- PG7
- W7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- 7/32UN
- SM7/32
- W7/32
- 7.5
- 8
- 8UN
- M8
- M8.0
- M8
- No8UN
- STI M8
- TV8
- W8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- BC9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M9.5
- W9.5
- W9.8
- 10
- 10UN
- M10
- M10.0
- M10
- No10UN
- STI M10
- Tr 10
- W10
- M10 to 13
- M10 to 25
- M10～25
- 11
- M11
- M11
- PG11
- W11
- 11/16
- W11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- M12
- No12UN
- STI M12
- Tr 12
- W12
- W12.5
- 13
- M13
- W13
- W13/16
- Ø : 13/16"
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- M14
- Tr 14
- W14
- 15
- M15
- W15
- W15/16
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- W16
- Øxmm : 16X5 , FOR ROUND DIES : M1-2.6 , BSW1/16-3/32
- 17
- M17
- W17
- M18
- M18
- Tr 18
- W18
- 19
- M19
- W19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr20
- Tr 20
- W20
- Øxmm : 20X5 , FOR ROUND DIES : M3-4 , BSW1/8-5/32
- Øxmm : 20X7 , FOR ROUND DIES : M4.5-6 , BSW3/16-1/4
- W20.32
- M21
- PG21
- W21
- 22
- M22
- M22
- M22X
- Tr 22
- W22
- M23
- W23
- M24
- M24
- M24X
- Tr 24
- W24
- 25
- M25
- M25X
- Tr 25
- W25
- Øxmm : 25X9 , FOR ROUND DIES : M7-9 , BSW5/16
- M25 to 50
- M25 to 70
- M26
- Tr 26
- W26
- M27
- W27
- 28
- M28
- Tr 28
- W28
- PG29
- W29
- M30
- Tr 30
- W30
- Øxmm : 30X11 , FOR ROUND DIES : M10-11 , BSW3/8-7/16
- 31
- 31/32
- M32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- 36
- M36
- PG36
- W36
- M37
- M38
- W38
- Øxmm : 38X10 , FOR ROUND DIES : Mf12-15 , G1/4
- Øxmm : 38X14 , FOR ROUND DIES : M12-14 , BSW1/2-9/16
- 39
- M39
- W39
- M40
- W40
- 42
- M42
- PG42
- W42
- M44
- W44
- M45
- W45
- Øxmm : 45X14 , FOR ROUND DIESV: Mf16-20 , G3/8-1/2
- Øxmm : 45X18 , FOR ROUND DIES : M16-20 , BSW5/8-13/16
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- W54
- M55
- W55
- Øxmm : 55X16 , FOR ROUND DIES : Mf22-26 , G5/8-3/4
- Øxmm : 55X22 , FOR ROUND DIES : M22-24 , BSW7/8-1"
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- Øxmm : 65X18 , FOR ROUND DIES : Mf27-36 , G7/8-1"
- Øxmm : 65X25 , FOR ROUND DIES : M27-36 , BSW1.1/8-1.3/8
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M80
- M85
- M90
- M95
- M100
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.7
- 1.75
- 1.8
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 267 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatibleFrom: ฿ 186.00 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Taper Tap for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipesFrom: ฿ 578.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ Suitable for workpiece materials where the chips are powdery or where the chips are produced as a small curl.
■The cutting edge strength is high.
■It is easy to resharpen.From: ฿ 273.49 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024YAMAWA MFG
■ The spiral flutes of the SP tap pull the small continuous curly chips backtowards the tapping chuck and prevents chips from clogging in the hole.These taps are ideal for blind hole tapping.
■These taps cut easily into softer materials.
■ Intermittent cutting into pilot holes with a keyway or grooves is possible.
■ The flute strength is inferior to the HT tap. The HT flute shape is more suitablefor high hardness materials.From: ฿ 302.65 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Parallel Tap for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.From: ฿ 483.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
■ Ideal for blind hole machining in stainless steel, chromium steel, molybdenum steel. Thesematerials have remarkably high work hardening properties.
■ The optimum design of the thread section reduces the processing burden on each flutes cuttingchamfer.
■ Reduces cutting resistance and increases tool life.
■ Chip discharge is stable and achieves a good surface finished.
■ Improved strength and life expectancy is achieved.
■ Use with either synchronous or asynchronous thread processing.From: ฿ 297.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Tap Set (for Metric Screws/HSS-E)【1-3 Pieces Per Package】
TRUSCO
A high-speed steel (HSS-E) tap set.
[Features]
· Can be used for both through holes and blind holes.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.From: ฿ 656.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP
YAMAWA MFG
■ The AU+SP tap has a special shape thathas the first few threads at full size andreduces the remainder to half of the screwthread height.
■ The special flute shape offers the followingperformance effects;1. Prevents chipping of the complete threads.2. Reduces the tapping torque and frictionalresistance.3. Creates a smooth discharge of chips.From: ฿ 690.17 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Solid Round Dies-D are born, with improved accuracy of run-out tolerance.The Solid Round Dies-D, realize consistent thread cutting by adopting HSS material.① The side with markingson its bevel, is the frontface.This makes it easyto determine the cuttingdirection.② The rear face becomesthe base for cutting. Therear face has a recessso that the die can fittightly in the die holderwhen installing.③ D is solid type and does not need the adjusting screw.Compared with adjustable type, accuracy of D'soutside diameter has been greatly improved.④ D has succeeded in solving difficult problems related to adjustable diesand achieved the high precision cutting of external threads.From: ฿ 1,257.72 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.From: ฿ 429.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT
YAMAWA MFG
■ The LS-S-PT is a long shank tapered pipe tapand is used when it is necessary to shorten thefitting length in a product whose main purposeis the tightness of the threaded portion in theconnection of pipe parts etc.From: ฿ 2,842.29 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT
YAMAWA MFG
■ LS-INT-S-PT long shank short spiral fluted tap,having low left-hand spiral flutes and havingevery other thread ground off, reduces cuttingtorque. LS-INT-S-PT is suitable for such sticky materialsas stainless steels and chrome molybdenumsteels.From: ฿ 3,282.30 Special Price Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT
YAMAWA MFG
■ LS-INT-S-PT long shank short spiral fluted tap,having low left-hand spiral flutes and havingevery other thread ground off, reduces cuttingtorque. LS-INT-S-PT is suitable for such sticky materialsas stainless steels and chrome molybdenumsteels.From: ฿ 5,133.90 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024OSG
Mainly used for tapping nuts. The threaded length and extended shank portion are designed for good workability with nuts, allowing continuous machining until the shank portion is completely filled with stacked up nuts.From: ฿ 871.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024YAMAWA MFG
Solid Round Dies-D are born, with improved accuracy of run-out tolerance.The Solid Round Dies-D, realize consistent thread cutting by adopting HSS material.① The side with markingson its bevel, is the frontface.This makes it easyto determine the cuttingdirection.② The rear face becomesthe base for cutting. Therear face has a recessso that the die can fittightly in the die holderwhen installing.③ D is solid type and does not need the adjusting screw.Compared with adjustable type, accuracy of D'soutside diameter has been greatly improved.④ D has succeeded in solving difficult problems related to adjustable diesand achieved the high precision cutting of external threads.From: ฿ 1,776.39 Special Price Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tapered Tap for American Piping Spiral Tap SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.From: ฿ 1,455.00 Special Price Days to Ship:
61 Day(s)
61 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 392.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
■ Long shank spiral fluted taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.From: ฿ 614.22 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Solid Round Dies-D are born, with improved accuracy of run-out tolerance.The Solid Round Dies-D, realize consistent thread cutting by adopting HSS material.① The side with markingson its bevel, is the frontface.This makes it easyto determine the cuttingdirection.② The rear face becomesthe base for cutting. Therear face has a recessso that the die can fittightly in the die holderwhen installing.③ D is solid type and does not need the adjusting screw.Compared with adjustable type, accuracy of D'soutside diameter has been greatly improved.④ D has succeeded in solving difficult problems related to adjustable diesand achieved the high precision cutting of external threads.From: ฿ 1,844.32 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Solid Round Dies for Left Hand Threads_D-LH
YAMAWA MFG
■ Solid round dies for left hand thread processingwith improved runout accuracy.From: ฿ 2,324.58 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 380.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX
YAMAWA MFG
■ Spiral fluted tap suitable for high carbon steelssuch as S55C and the like, oxidized to avoidwelding trouble.From: ฿ 322.36 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Solid Round Dies-D are born, with improved accuracy of run-out tolerance.The Solid Round Dies-D, realize consistent thread cutting by adopting HSS material.① The side with markingson its bevel, is the frontface.This makes it easyto determine the cuttingdirection.② The rear face becomesthe base for cutting. Therear face has a recessso that the die can fittightly in the die holderwhen installing.③ D is solid type and does not need the adjusting screw.Compared with adjustable type, accuracy of D'soutside diameter has been greatly improved.④ D has succeeded in solving difficult problems related to adjustable diesand achieved the high precision cutting of external threads.From: ฿ 1,776.39 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
Solid Round Dies-D are born, with improved accuracy of run-out tolerance.The Solid Round Dies-D, realize consistent thread cutting by adopting HSS material.① The side with markingson its bevel, is the frontface.This makes it easyto determine the cuttingdirection.② The rear face becomesthe base for cutting. Therear face has a recessso that the die can fittightly in the die holderwhen installing.③ D is solid type and does not need the adjusting screw.Compared with adjustable type, accuracy of D'soutside diameter has been greatly improved.④ D has succeeded in solving difficult problems related to adjustable diesand achieved the high precision cutting of external threads.From: ฿ 2,350.45 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
HOZAN
A standard tap handle.
[Features]
· Guarantees threading work with stability.From: ฿ 385.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
Torsional angled groove shape, cutting edge, and clearance angle provide a unique design that results in extraordinarily low cutting torque and increased wear resistance, with threaded section also oxidized for outstanding durability.From: ฿ 584.17 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Taper Pipe Threads_Rc
YAMAWA MFG
■ The Rc is a hand tap for a tapered pipe threadsconforming to ISO specifications. It is used formating with external tapered pipe threadsR(PT).From: ฿ 793.89 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT
YAMAWA MFG
■ The LS-S-PT is a long shank tapered pipe tapand is used when it is necessary to shorten thefitting length in a product whose main purposeis the tightness of the threaded portion in theconnection of pipe parts etc.From: ฿ 1,443.24 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
■ The E-SP is suitable for tapping relatively soft work piece materialssuch as mild steel (SS41, S25C, etc.).
■ It produces a good internal thread with an excellent surface finish.From: ฿ 314.74 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals_HL-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.From: ฿ 709.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 853.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,882.95 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Carbon Steels_HC+SP
YAMAWA MFG
■ The HC+SP/HC-SP is a spiral flute tap for high carbon steel such as S55C and is suitable for tapping of medium and highhardness materials up to 30 HRC.From: ฿ 307.37 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.From: ฿ 350.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 280.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ The chips from the tap's cutting chamfer are pushed forward. This isoptimal for through hole tapping where there are no obstructions createdby the chip.
■Straight flutes are shallow so the taps strength is very high.From: ฿ 302.56 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024NACHI(FUJIKOSHI)
[Applications]
It can be used for machining threaded holes.
[Features]
This product can be used universally because it is not treated, and its coiled groove can discharge chips.From: ฿ 200.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Taper Tap for Pipes Spiral Tap SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.From: ฿ 959.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap Combined with Drill_DRT
OSG
Very effective in improving productivity thanks to enabling continuous tap hole drilling using the tip drill part and screw tapping processing at the tap partFrom: ฿ 1,385.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Tap for Blind Hole 1013
GUHRING
[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.From: ฿ 776.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
■ The SU-HT is a hand tap suitable for machining of stainless steel, chromium steel, molybdenum steel.These materials have a tendency to work harden easily.
■To prevent welding, the taps surface is oxidized.From: ฿ 257.56 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
■ The SU+PO/SU-PO taps are designed for stainless steel that causes work harden easily. The cuttinggeometry is also suited for tapping through holes in chromium steel and molybdenum steel.
■To prevent chip welding, the tap's surface is oxidized.From: ฿ 290.81 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Hand Taps for Parallel Pipe Threads, for LH Threads_PS-LH
YAMAWA MFG
■ The PS LH is a hand tap for left hand parrallelpipe threads and is used for products whosemain purpose is the tightness of threaded partsin connecting piping parts. The PS internalthread is used for fitting with PT external thread.From: ฿ 1,044.30 Special Price Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for High Speed Tapping_F-SP
YAMAWA MFG
■High speed machining is possible with a machine equipped with a fully synchronous feed mechanism.
■The F-SP exhibits excellent chip ejection properties from its unique flute shape and short thread length.
■ At low speed, the shape and ejection of the chips can deteriorate, causing problems.From: ฿ 837.51 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Solid Round Dies for Left Hand Threads_D-LH
YAMAWA MFG
■ Solid round dies for left hand thread processingwith improved runout accuracy.From: ฿ 3,100.28 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Parallel Pipe Threads, for Stainless Steels_SU-SP-PF
YAMAWA MFG
■ The SU-SP-PF is a spiral flute tap suitablefor machining stainless steel, chromium steel,molybdenum steel. These are materials thathave a remarkably high work hardened ability.From: ฿ 1,088.90 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes Spiral Tap, Long Shank LT-SFT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.From: ฿ 1,555.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tapered Tap for American Piping General Use (NPTF) TPT
OSG
Used to process tapered female pipe threads. Mainly used for connecting pipesFrom: ฿ 1,349.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
ONISHI MANUFACTURING
[Features]
· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.
[Applications]
· For formation and modification of through-hole threads.
· Work materials: Iron, aluminum, brass.
[Features]
· 1 unit enables pilot hole machining and thread cutting at the same time.
· 6.35 mm hex shaft finish that supports impact drivers.
· Drill cutting edge with good bite due to X-type thinning and outstanding sharpnessFrom: ฿ 1,140.08 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Solid Die (For Stainless Steels) SUS-SD
OSG
[Specifications]
· Shape: Die
· Screw type: metric
· Coating: Non-Coated
· Tool material: HSSFrom: ฿ 1,954.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including spiral taps, pilot hole drills, and tap wrenchesFrom: ฿ 11,773.73 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Aluminum_AL+SP
YAMAWA MFG
■ Stable screw tapping in light alloy castings such as aluminum die casting and aluminum casting even at a high speed range.
■ Optimum design of the flute makes it possible to produce stable and clean internal threading with fewer burrson the inner diameter that normally occur in tapping of light alloys.From: ฿ 329.27 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Left Hand Threads_SP-LH
YAMAWA MFG
■ The SP LH is a spiral flute tap for tapping lefthand thread blind holes.From: ฿ 409.96 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ R+V is coated forming tap for ferrous and nonferrousmaterials. Optimum coating suitable to thetapping condition.From: ฿ 705.88 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
■ The PT is a hand tap for tapered pipe threadsand is used for tapping products whose mainpurpose is the tightness of the threaded portionwhen connecting pipe parts etc.From: ฿ 646.70 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.From: ฿ 580.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Flute Tap for Through Hole for Trapezoidal Threads_SL-Tr
YAMAWA MFG
■ The SL Tr is a spiral flute tap for through holetrapezoidal threads. The thread angle is 30°. Thethread symbol is represented by Tr.From: ฿ 13,935.81 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 387.33 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
General purpose hand tap.
[Features]
· Used in various contexts.From: ฿ 320.92 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Spiral Tap with Oil Holes OIL-SFT
OSG
Convenient for the lateral tapping of blind holes and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tappingFrom: ฿ 583.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Steels_NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holesFrom: ฿ 314.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 247.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tapered Tap for American Piping General Use (NPS) SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.From: ฿ 933.00 Special Price Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Threading Round Die Series Pipe Tapered Threading Round Die TPD-H-PT
OSG
[Specifications]
· Shape: Die
· Screw type: pipe taper
· Coating: Non-Coated
· Tool material: HSSFrom: ฿ 7,886.00 Special Price Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024
Threading Round Die Series Pipe Tapered Threading Round Die TPD-H-NPT
OSG
[Specifications]
· Shape: Die
· Screw type: pipe taper
· Coating: Non-Coated
· Tool material: HSSFrom: ฿ 9,243.00 Special Price Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pg Conduit Thread Tap (German Standard)
SKC
Easy for anyone to use, minimizing valuable production time and improving work efficiency.From: ฿ 3,374.98 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Jet/spiral tap/drill set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including jet taps, spiral taps, pilot hole drills, and tap wrenchesFrom: ฿ 11,079.62 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP
YAMAWA MFG
■ SU-S-SP is the short spiral fluted tap forstainless steels suitable for stainless steelstending to work-harden and sticky, as well aschrome steels and molybdenum steels. Blindhole use. Deeper hole tapping is attainable.From: ฿ 498.25 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
■ The SP OX is a spiral flute tap for blind holetapping. These taps have an applied oxidationtreatment to prevent chip welding on thesurface of the taps threaded portion. They aresuitable for thread processing of soft steelmaterials where the chips easily weld to the taplike low carbon.From: ฿ 355.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 792.31 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
■ The PO LH is a spiral pointed tap for left handthreads in through hole tapping.From: ฿ 510.95 Special Price Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Hand Taps for Parallel Pipe Threads_PS
YAMAWA MFG
■ The PS is a hand tap for parallel pipethreads and is used for products whose mainpurpose is the tightness of the threaded partin connection with pipe parts etc. The PSinternal thread is used for fitting with PTexternal thread.From: ฿ 623.17 Special Price Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D
YAMAWA MFG
■ The HS-D is a HSS round dies for auto lathe,for stainless steels.From: ฿ 1,863.67 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Fluted Taps for Taper Pipe Threads, Long (ℓg) Type for Stainless Steels_SU-SP-PT
YAMAWA MFG
■ SU-SP-PT is the tap suitable for stainlesssteels which tend to work-harden and sticky, aswell as chrome steels and molybdenum steels,blind hole use.From: ฿ 1,344.36 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
High performance taps which have long tool life and stable tapping in various cutting conditions.From: ฿ 390.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 460.81 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.From: ฿ 632.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Taper Tap for Pipes General Use Short Screw S-TPT
OSG
Used to process tapered female pipe threads. Short threading type used for tapping short thread lengths such as those for elbows and teesFrom: ฿ 632.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Parallel Tap for Pipes General Use (Left-hand thread) SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.From: ฿ 949.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Pipe Thread Tap Long Shank General Application_LT-SPT
OSG
Used to process female threads for parallel pipe threads.From: ฿ 1,403.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tapered Tap for American Piping Interlap Type IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.From: ฿ 1,572.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)
ONISHI MANUFACTURING
[Features]
· Uses HSS that features excellent abrasion resistance.
· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.
· Cutting chips are discharged upwards due to the spiral grooveFrom: ฿ 543.58 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 336.92 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ N+RZ/N-RZ are the forming taps suitable forferrous materials such as carbon steels, alloysteels, and normal steels.From: ฿ 375.98 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps, Oxidized_PO-OX
YAMAWA MFG
■ The +PO is a spiral pointed tap for through holetapping and is suitable for synchronous feedprocessing in middle to high thread processingof soft steel materials whose chips easily weldto the taps thread such as low carbon steels.From: ฿ 241.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Fluted Taps, Coated_LS-SP-V
YAMAWA MFG
■ Long shank coated spiral fluted taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.From: ฿ 980.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Hand Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_FC-S-PT
YAMAWA MFG
■ FC-S-PT is the tap with short thread portion,suitable for hard and abrasive materials such ascast irons.From: ฿ 1,704.63 Special Price Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
■ Due to short thread portion, friction becomesless and lubrication supply becomes better, andS-SP is the spiral fluted tap quite efficient fortapping deep holes that are 2.5 times deeperthan the nominal dia.From: ฿ 380.75 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
■ N+RS/N-RS are the forming taps suitable fornon-ferrous materials such as aluminum castings,aluminum diecasting and brass.From: ฿ 377.53 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper.From: ฿ 997.23 Days to Ship:
12 Day(s)
12 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.       | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 30/06/2024   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list. Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | YAMAWA MFG | TRUSCO | YAMAWA MFG | YAMAWA MFG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | YAMAWA MFG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | HOZAN | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | TANOI MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | OSG | YAMAWA MFG | NACHI(FUJIKOSHI) | OSG | OSG | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | ONISHI MANUFACTURING | OSG | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | YAMAWA MFG | HOZAN | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | SKC | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | ONISHI MANUFACTURING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | RUKO |
| Product Series | Hand Tap Set (for Metric Screws/HSS-E)【1-3 Pieces Per Package】 | Plus Series Spiral Fluted Taps,Optimum Coating for the Tapping_AU+SP | Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT | Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT | Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT | Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX | Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals_HL-B-NRT | Spiral Fluted Taps for Parallel Pipe Threads, for Stainless Steels_SU-SP-PF | Spiral Flute Tap for Through Hole for Trapezoidal Threads_SL-Tr | Threading Round Die Series Pipe Tapered Threading Round Die TPD-H-PT | Threading Round Die Series Pipe Tapered Threading Round Die TPD-H-NPT | Spiral Fluted Taps for Stainless Steels, Deep Hole Use_SU-S-SP | Spiral Fluted Taps for Taper Pipe Threads, Long (ℓg) Type for Stainless Steels_SU-SP-PT | Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT | Parallel Pipe Thread Tap Long Shank General Application_LT-SPT | Hand Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_FC-S-PT | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 186.00 Special Price On Sale Until 30/06/2024 | ฿ 578.00 Special Price On Sale Until 30/06/2024 | ฿ 273.49 | ฿ 302.65 Special Price On Sale Until 30/06/2024 | ฿ 483.00 Special Price On Sale Until 30/06/2024 | ฿ 297.00 | ฿ 656.00 | ฿ 690.17 | ฿ 1,257.72 | ฿ 429.00 | ฿ 2,842.29 | ฿ 3,282.30 Special Price On Sale Until 30/06/2024 | ฿ 5,133.90 | ฿ 871.00 Special Price On Sale Until 30/06/2024 | ฿ 1,776.39 Special Price On Sale Until 30/06/2024 | ฿ 1,455.00 Special Price On Sale Until 30/06/2024 | ฿ 392.00 | ฿ 614.22 Special Price On Sale Until 30/06/2024 | ฿ 1,844.32 | ฿ 2,324.58 | ฿ 380.00 | ฿ 322.36 | ฿ 1,776.39 | ฿ 2,350.45 | ฿ 385.00 | ฿ 584.17 | ฿ 793.89 | ฿ 1,443.24 | ฿ 314.74 | ฿ 709.00 | ฿ 853.83 | ฿ 4,882.95 | ฿ 307.37 | ฿ 350.00 | ฿ 280.00 | ฿ 302.56 | ฿ 200.00 Special Price On Sale Until 30/06/2024 | ฿ 959.00 Special Price On Sale Until 30/06/2024 | ฿ 1,385.00 | ฿ 776.00 | ฿ 257.56 | ฿ 290.81 Special Price On Sale Until 30/06/2024 | ฿ 1,044.30 Special Price On Sale Until 30/06/2024 | ฿ 837.51 | ฿ 3,100.28 | ฿ 1,088.90 | ฿ 1,555.00 | ฿ 1,349.00 Special Price On Sale Until 30/06/2024 | ฿ 1,140.08 | ฿ 1,954.00 | ฿ 11,773.73 | ฿ 329.27 | ฿ 409.96 | ฿ 705.88 | ฿ 646.70 Special Price On Sale Until 30/06/2024 | ฿ 580.00 | ฿ 13,935.81 | ฿ 387.33 | ฿ 320.92 | ฿ 583.00 Special Price On Sale Until 30/06/2024 | ฿ 314.00 | ฿ 247.00 | ฿ 933.00 Special Price On Sale Until 30/06/2024 | ฿ 7,886.00 Special Price On Sale Until 30/06/2024 | ฿ 9,243.00 Special Price On Sale Until 30/06/2024 | ฿ 3,374.98 | ฿ 11,079.62 | ฿ 498.25 | ฿ 355.00 | ฿ 792.31 | ฿ 510.95 Special Price On Sale Until 30/06/2024 | ฿ 623.17 Special Price On Sale Until 30/06/2024 | ฿ 1,863.67 | ฿ 1,344.36 | ฿ 390.00 | ฿ 460.81 | ฿ 632.00 | ฿ 632.00 Special Price On Sale Until 30/06/2024 | ฿ 949.00 | ฿ 1,403.00 | ฿ 1,572.00 Special Price On Sale Until 30/06/2024 | ฿ 543.58 | ฿ 336.92 | ฿ 375.98 | ฿ 241.00 | ฿ 980.83 | ฿ 1,704.63 Special Price On Sale Until 30/06/2024 | ฿ 380.75 | ฿ 377.53 | ฿ 997.23 |
| Days to Ship | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 19 Day(s) | 20 Day(s) | 20 Day(s) | Same day | 1 Day(s) | 61 Day(s) | Same day | Same day | 10 Day(s) | 1 Day(s) | 5 Day(s) | Same day | 10 Day(s) | 20 Day(s) | 1 Day(s) | Same day | Same day | Same day | 1 Day(s) | Same day | 5 Day(s) | 31 Day(s) | Same day | 5 Day(s) | Same day | Same day | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | 20 Day(s) | 12 Day(s) | 20 Day(s) | 5 Day(s) | 91 Day(s) | 5 Day(s) | 1 Day(s) | Same day | 1 Day(s) | Same day | 1 Day(s) | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | 11 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 91 Day(s) | 91 Day(s) | 91 Day(s) | 5 Day(s) | 5 Day(s) | Same day | Same day | 19 Day(s) | 1 Day(s) | 1 Day(s) | Same day | 20 Day(s) | 5 Day(s) | 31 Day(s) | 91 Day(s) | Same day | 91 Day(s) | 5 Day(s) | 5 Day(s) | 1 Day(s) | Same day | 19 Day(s) | 10 Day(s) | 5 Day(s) | 20 Day(s) | Same day | 19 Day(s) | 12 Day(s) |
| Screw size (Nominal) | No.0UN ～ M100 | NPT1 ～ R7/8 | No.0 ～ M36 | No.3 ～ M48 | G1 ～ G7/8 | No.10 ～ M45 | M3 ～ M16 | M2 ～ M12 | M1 ～ M50 | No.10UN ～ M30 | 3/8-19 | 1/8-28 ～ 3/4-14 | 1/4-19 ～ 1/8-28 | No.6UN ～ M36 | No.10 ～ 9/16 | NPT1 ～ NPT3/8 | M1 ～ M24 | 1 ～ M36 | 1 1/2 ～ 9/16 | M1 ～ M48 | M3 ～ M12 | M3 ～ M16 | No.0 ～ UNC1/4 | 1/4 ～ 15/64 | - | M3 ～ M4 | 1/2-14 ～ 3/8-19 | 1/4-19 ～ 1/8-28 | M3 ～ M24 | M3 ～ M12 | M1 ～ M10 | M2.5 | 1/2W12 ～ M30 | M1.4 ～ M6 | M1 ～ M20 | No.0 ～ M40 | M2.5 ～ M30 | R1 ～ R3/8 | M3 ～ M12 | M2 ～ M20 | 1/2-20UNF ～ M30 | No.10 ～ M42 | 1'-11 ～ 3/8-19 | M3 ～ M12 | 1 ～ 7/16 | PF 1 ～ PF 3/8 | PF1 ～ PF3/8 | NPT1 ～ NPT3/8 | M3 ～ M6 | M2 ～ M10 | - | M2 ～ M24 | M2 ～ M30 | M1 ～ M6 | 1'-11 ～ 4'-11 | M1.4 ～ M24 | Tr 10 ～ Tr 30 | M3 ～ M6 | M3 ～ M24 | M6 ～ M30 | No.3UN ～ M16 | No.0UN ～ M6 | NPS1 ～ NPS4 | R1 ～ R3/8 | NPT1 ～ NPT3/8 | PG7 ～ PG42 | - | M3 ～ M20 | No.10 ～ M30 | M10 ～ M16 | 1/4-20UNC ～ M30 | 1 ～ 4 | M1 ～ M10 | PT 1 ～ PT 3/8 | M3 ～ M12 | M3 ～ M6 | No.10UN ～ M12 | NPT1 ～ R3/8 | G1 ～ Rp3/8 | Rp1 ～ Rp3/8 | NPT1 ～ NPT3/8 | M4 ～ M10 | M3 ～ M8 | M1 ～ M20 | M1.4 ～ M42 | M3 ～ M12 | 1'1/2-11 ～ 3/8-19 | M2 ～ M45 | M1 ～ M10 | M3 ～ M6 |
| Screw Types | Meter / unified / Whitworth / Sewing Machine | Taper for Pipe | Meter / unified / Sewing Machine | Meter / unified / Whitworth / Sewing Machine | Parallel for Pipes | Meter / unified / Whitworth | Meter | Meter | Meter | Meter / unified | Taper for Pipe | Taper for Pipe | Taper for Pipe | Meter / unified | unified | Taper for Pipe | Meter | Meter / unified / Whitworth | Whitworth | Meter | Meter | Meter | unified | Sewing Machine | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Meter | Meter / Whitworth | Meter | Meter | Meter / unified / Whitworth / Sewing Machine | Meter | Taper for Pipe | Meter | Meter | Meter / unified / Whitworth | Meter / unified / Whitworth | Parallel for Pipes | Meter | unified | Parallel for Pipes | Parallel for Pipes | Taper for Pipe | Meter | Meter | - | Meter | Meter | Meter | Taper for Pipe | Meter | Trapezoid | Meter | Meter | Meter | Meter / unified | Meter / unified | Parallel for Pipes | Taper for Pipe | Taper for Pipe | Other | - | Meter | Meter / unified / Whitworth | Meter | Meter / unified / Whitworth | Parallel for Pipes | Meter | Taper for Pipe | Meter | Meter | Meter / unified | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Meter | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 80 | 8 ～ 28 | 0.2 ～ 80 | 0.25 ～ 48 | 11 ～ 28 | 0.3 ～ 56 | 0.5 ～ 2 | 0.4 ～ 1.75 | 0.2 ～ 5 | 0.45 ～ 40 | - | - | - | 0.5 ～ 32 | 5 ～ 32 | 11.5 ～ 27 | 0.25 ～ 3 | 0.4 ～ 24 | 6 ～ 60 | 0.25 ～ 5 | 0.5 ～ 1.75 | 0.5 ～ 2 | 20 ～ 80 | 24 ～ 56 | - | 0.5 ～ 0.7 | - | - | 0.5 ～ 3 | 0.5 ～ 1.75 | 0.2 ～ 1.5 | 0.45 | 0.5 ～ 3 | 0.3 ～ 1 | 0.25 ～ 2.5 | 0.25 ～ 80 | 0.35 ～ 3 | 11 ～ 28 | 0.5 ～ 1.75 | 0.4 ～ 2.5 | 0.4 ～ 3 | 0.3 ～ 56 | - | 0.5 ～ 1.75 | 8 ～ 24 | 11 ～ 28 | 11 ～ 28 | 11.5 ～ 27 | 0.5 ～ 1 | 0.35 ～ 1.5 | - | 0.4 ～ 3 | 0.4 ～ 2.5 | 0.25 ～ 1 | - | 0.25 ～ 3 | 2 ～ 6 | 0.5 ～ 1 | 0.5 ～ 3 | 1 ～ 3.5 | 0.25 ～ 48 | 0.25 ～ 80 | 8 ～ 27 | 11 ～ 28 | 11.5 ～ 27 | 16 ～ 20 | - | 0.5 ～ 2.5 | 0.35 ～ 56 | 1.5 ～ 2 | 0.5 ～ 3.5 | 11 ～ 28 | 0.25 ～ 1.5 | 11 ～ 28 | 0.35 ～ 1.75 | 0.5 ～ 1 | 0.5 ～ 40 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11.5 ～ 27 | 0.7 ～ 1.5 | 0.5 ～ 1.25 | 0.25 ～ 2 | 0.3 ～ 4.5 | 0.5 ～ 1.75 | - | 0.4 ～ 4.5 | 0.25 ～ 1.5 | 0.5 ～ 1 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Hand Tap | Tap for pipes | Hand Tap | Spiral Tap | Tap for pipes | Spiral Tap | Hand Tap | Spiral Tap | Die | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes | Thread-cutting-related tool | Die | Tap for pipes | Hand Tap | Spiral Tap | Die | Die | Point tap | Spiral Tap | Die | Die | Tap wrench | Spiral Tap | Tap for pipes | Tap for pipes | Spiral Tap | Roll tap | Roll tap | Thread-cutting-related tool | Spiral Tap | Roll tap | Roll tap | Point tap | Spiral Tap | Tap for pipes | Thread-cutting-related tool | Spiral Tap | Hand Tap | Point tap | Tap for pipes | Spiral Tap | Die | Spiral Tap | Tap for pipes | Tap for pipes | Thread-cutting-related tool | Die | Thread-cutting-related tool | Spiral Tap | Spiral Tap | Roll tap | Tap for pipes | Point tap | Spiral Tap | Hand Tap | Hand Tap | Spiral Tap | Roll tap | Roll tap | Tap for pipes | Die | Die | Tap for pipes | Thread-cutting-related tool | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Tap for pipes | Die | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Thread-cutting-related tool | Thread-cutting-related tool | Roll tap | Point tap | Spiral Tap | Tap for pipes | Spiral Tap | Roll tap | Hand Tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | - | - | For blind hole | For through hole / For blind hole | For blind hole | - | - | For through hole | For blind hole | - | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | - | For blind hole | For through hole / For blind hole | For through hole | - | For blind hole | - | For blind hole | For blind hole | For through hole / For blind hole | For through hole | - | - | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - | - | - | For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole |
| Chamfer threads (Lcf) | 1.5P ～ 9P | 2.5P | 1.5P ～ 5P | 2.5P | 1.5P ～ 4P | 2.5P | - | 2.5P | - | 1.5P ～ 9P | 2.5P | 3P | 3P | - | - | 2.5P | 1.5P ～ 5P | 2.5P | - | - | 5 | 2.5P | - | - | - | - | 2.5P | 2.5P | 2.5P | 2P | 1P ～ 4P | - | 2.5P | 2P ～ 4P | 2P ～ 4P | 5P | 2.5 | 2.5P | 5P | - | 1.5P ～ 4P | 5P | 3.5P | 2.5P | - | 2.5P | 2.5P | 2.5P | - | - | - | 1.5P ～ 2.5P | 2.5P | 2P ～ 4P | 2.5P | 5 | 22P ～ 30P | - | 1.5P ～ 5P | 2.5P | 2P ～ 4P | 2.5P ～ 4P | 4P | - | - | - | - | 2.5P | 2.5P | 2.5P | 5P | 1.5P ～ 3.5P | - | 2P | 2.5 | 5 | 1.5P ～ 5P | 2.5P | 4P | 4P | 2.5P | - | - | 2P ～ 4P | 5P | 2.5P | 2.5P | 2.5P | 2P ～ 4P | - |
| Coating Type | Non-Coated | Non-Coated | - | - | Non-Coated | - | Non-Coated | TiN | - | Non-Coated | - | - | - | Non-Coated | - | Non-Coated | - | - | - | - | - | - | - | Non-Coated | - | Other | - | - | - | Non-Coated | Other | - | - | - | TiN | - | Non-Coated | Non-Coated | Non-Coated | TiN | - | - | - | TiN | Non-Coated | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | TiN | - | TiCN | - | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | - | - | TiN | - | - | - | Other | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | - | - | - | Non-Coated |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | Available | NA | NA | NA | Available | NA | NA | NA | NA | Available | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | Available | NA | NA | NA | Available | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 30 ～ 275 | 55 ～ 170 | 36 ～ 155 | 36 ～ 195 | 55 ～ 170 | 36 ～ 180 | 46 ～ 95 | 42 ～ 82 | - | 46 ～ 155 | 100 ～ 200 | 100 ～ 150 | 150 | 90 ～ 330 | - | 55 ～ 95 | 36 ～ 120 | 70 ～ 300 | - | - | 46 ～ 82 | 46 ～ 95 | - | - | 80 | 46 ～ 52 | 59 ～ 87 | 100 | 46 ～ 120 | 48 ～ 90 | 30 ～ 75 | 46 | 46 ～ 135 | 34 ～ 62 | 30 ～ 105 | 36 ～ 195 | 44 ～ 135 | 55 ～ 110 | 62 ～ 130 | 40 ～ 105 | 42 ～ 135 | 36 ～ 175 | 55 ～ 120 | 46 ～ 82 | - | 59 ～ 109 | 120 ～ 150 | 55 ～ 120 | 66 ～ 69 | - | - | 42 ～ 135 | 42 ～ 135 | 36 ～ 62 | 55 ～ 170 | 34 ～ 120 | 160 ～ 300 | - | 46 ～ 120 | 80 ～ 250 | 30 ～ 95 | 30 ～ 62 | 55 ～ 170 | - | - | 85 ～ 135 | - | 46 ～ 105 | 36 ～ 135 | 75 ～ 95 | 46 ～ 135 | 55 ～ 170 | - | 55 ～ 120 | 46 ～ 82 | 46 ～ 62 | 100 ～ 150 | 55 ～ 155 | 55 ～ 95 | 120 ～ 150 | 55 ～ 120 | 70 | 70 | 36 ～ 105 | 36 ～ 175 | 100 ～ 150 | 62 ～ 120 | 42 ～ 180 | 36 ～ 75 | 51 ～ 60 |
Loading...
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?