(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
YAMAWA MFG
From: ฿ 5,256.65 |
---|
Days to Ship: |
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
From: ฿ 3,425.91 |
---|
Days to Ship: |
Threading Round Die Series Pipe General Threading Round Die RD-H
OSG
From: ฿ 3,705.00 |
---|
Special Price |
Days to Ship: |
MUGEN Coating Series M Thread Mill
NS TOOL
From: ฿ 4,216.25 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 480.00 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 706.67 |
---|
Days to Ship: |
OSG
From: ฿ 953.00 |
---|
Days to Ship: |
Pointed Tap for Deep Holes EX-DH-POT
OSG
From: ฿ 545.00 |
---|
Special Price |
Days to Ship: |
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
From: ฿ 891.00 |
---|
Days to Ship: |
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
From: ฿ 891.00 |
---|
Days to Ship: |
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
From: ฿ 1,113.00 |
---|
Days to Ship: |
Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS
OSG
From: ฿ 1,089.00 |
---|
Days to Ship: |
Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT
OSG
From: ฿ 1,113.00 |
---|
Days to Ship: |
Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT
OSG
From: ฿ 891.00 |
---|
Days to Ship: |
Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
OSG
From: ฿ 575.00 |
---|
Days to Ship: |
TANOI MFG
From: ฿ 1,333.81 |
---|
Days to Ship: |
From: ฿ 625.73 |
---|
Days to Ship: |
From: ฿ 631.13 |
---|
Days to Ship: |
From: ฿ 710.00 |
---|
Days to Ship: |
Point Tap for Through Holes 1015
GUHRING
From: ฿ 1,004.00 |
---|
Days to Ship: |
Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT
YAMAWA MFG
From: ฿ 492.00 |
---|
Days to Ship: |
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
From: ฿ 1,029.68 |
---|
Days to Ship: |
Spiral Pointed Taps for High Carbon Steels_HC+PO
YAMAWA MFG
From: ฿ 532.70 |
---|
Days to Ship: |
Short Spiral Pointed Taps for Deep Hole Use_S-PO
YAMAWA MFG
From: ฿ 633.70 |
---|
Days to Ship: |
Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S
YAMAWA MFG
From: ฿ 598.34 |
---|
Days to Ship: |
Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T
YAMAWA MFG
From: ฿ 536.35 |
---|
Days to Ship: |
Carbide Taps for Light Alloys_N-CT-LA
YAMAWA MFG
From: ฿ 3,062.99 |
---|
Days to Ship: |
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
From: ฿ 3,062.99 |
---|
Days to Ship: |
Roll Taps for Thin Soft Structural Steel Sheets_R-Y
YAMAWA MFG
From: ฿ 359.07 |
---|
Days to Ship: |
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
From: ฿ 2,155.00 |
---|
Days to Ship: |
UNION TOOL
From: ฿ 13,903.83 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 1,036.13 |
---|
Days to Ship: |
From: ฿ 576.10 |
---|
Days to Ship: |
Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S
YAMAWA MFG
From: ฿ 821.20 |
---|
Days to Ship: |
Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T
YAMAWA MFG
From: ฿ 569.12 |
---|
Days to Ship: |
MITSUTOMO Die With Adjustment Screw, Die Diameter ø25 mm (Alloy Tool Steel)
MITSUTOMO
From: ฿ 409.00 |
---|
Days to Ship: |
MITSUTOMO Female Threading Tap, Medium Tap (Alloy Tool Steel)
MITSUTOMO
From: ฿ 276.00 |
---|
Days to Ship: |
Brand |
---|
Product Series |
From |
Days to Ship |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | YAMAWA MFG | YAMAWA MFG | OSG | NS TOOL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TANOI MFG | SKC | GUHRING | GUHRING | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | UNION TOOL | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | YAMAWA MFG | YAMAWA MFG | MITSUTOMO | MITSUTOMO |
Product Series | Threading Round Die Series Pipe General Threading Round Die RD-H | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT | Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT | Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT | Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S | Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T | Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S | Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T | MITSUTOMO Die With Adjustment Screw, Die Diameter ø25 mm (Alloy Tool Steel) | MITSUTOMO Female Threading Tap, Medium Tap (Alloy Tool Steel) | |||||||||||||||||||||||||
From | ฿ 5,256.65 | ฿ 3,425.91 | ฿ 3,705.00 Special Price On Sale Until 31/07/2024 | ฿ 4,216.25 | ฿ 480.00 | ฿ 706.67 | ฿ 953.00 | ฿ 545.00 Special Price On Sale Until 31/07/2024 | ฿ 891.00 | ฿ 891.00 | ฿ 1,113.00 | ฿ 1,089.00 | ฿ 1,113.00 | ฿ 891.00 | ฿ 575.00 | ฿ 1,333.81 | ฿ 625.73 | ฿ 631.13 | ฿ 710.00 | ฿ 1,004.00 | ฿ 492.00 | ฿ 1,029.68 | ฿ 532.70 | ฿ 633.70 | ฿ 598.34 | ฿ 536.35 | ฿ 3,062.99 | ฿ 3,062.99 | ฿ 359.07 | ฿ 2,155.00 | ฿ 13,903.83 | ฿ 1,036.13 | ฿ 576.10 | ฿ 821.20 | ฿ 569.12 | ฿ 409.00 | ฿ 276.00 |
Days to Ship | 7 Day(s) | 19 Day(s) | 91 Day(s) | 20 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 91 Day(s) | Same day | Same day | 5 Day(s) | 5 Day(s) | 91 Day(s) | 91 Day(s) | 91 Day(s) | 31 Day(s) | 31 Day(s) | Same day | 31 Day(s) | 5 Day(s) | 80 Day(s) | Same day | 1 Day(s) | 1 Day(s) | 20 Day(s) | 20 Day(s) | 19 Day(s) | 19 Day(s) | 20 Day(s) | 5 Day(s) | 40 Day(s) | 5 Day(s) | 31 Day(s) | 20 Day(s) | 20 Day(s) | 31 Day(s) | 31 Day(s) |
Screw size (Nominal) | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 | M2 |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | - | Meter | Meter | Meter | Meter | - | - |
work material | - | High Hardness Steel (50-60 HRC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | - | Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | - | - | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | - |
Pitch (P), Number of Threading(mm) | 0.25 ~ 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.25 ~ 0.4 | 0.4 | 0.25 ~ 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
Tool Material Type | High-speed steel | Carbide | High-speed steel | Carbide | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | Powder high-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | - |
Tap Type | Die | Point tap | Die | Thread cutter | Roll tap | Roll tap | Spiral Tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Die | Spiral Tap | Point tap | Point tap | Hand Tap | Roll tap | Point tap | Point tap | Thread-cutting-related tool | Thread-cutting-related tool | Hand Tap | Hand Tap | Roll tap | Point tap | Thread-cutting-related tool | Point tap | Point tap | Thread-cutting-related tool | Thread-cutting-related tool | - | - |
Hole type | - | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | - | - | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For through hole | For through hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For through hole | For through hole | For blind hole | For through hole / For blind hole | - | - |
Chamfer threads (Lcf) | - | 5P | - | - | 2P ~ 4P | 2P ~ 4P | 2.5P | 4P | 2P | 1P | 2P ~ 4P | 2P | 2P | 8P | 2P ~ 4P | 1P ~ 4P | - | - | - | - | 1P | 1P | 5P | 5P | - | - | 1.5P ~ 3P | 1.5P ~ 3P | 3P | 5P | - | 5 | 5 | - | - | - | - |
Coating Type | - | TiAlN | Non-Coated | - | - | - | Other | Non-Coated | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | Non-Coated | Other | - | Non-Coated | Non-Coated | TiN | - | TiCN | - | - | - | - | - | - | - | Other | Other | TiCN | Non-Coated | Non-Coated | Non-Coated | - | - |
Coating Y/N | NA | Available | NA | Available | NA | NA | Available | NA | Available | Available | Available | Available | Available | Available | NA | Available | - | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | NA | NA | NA | - | - |
Overall Length (L)(mm) | - | 40 | - | 45 | 40 | 40 | 40 | 40 | 40 | 40 | 80 | 40 | 80 | 40 | 40 | 60 ~ 80 | - | 40 | 40 | 40 | 42 | 42 | 42 | 42 | 41.5 | 42 | 40 | 40 | 42 | 80 | 50 | 40 | 40 | 41.5 | - | - | - |
Loading...
How can we improve?
How can we improve?