(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
OSG
From: ฿ 84.00 |
---|
Special Price |
Days to Ship: |
Pointed Tap Series, General Purpose EX-POT
OSG
From: ฿ 176.00 |
---|
Special Price |
Days to Ship: |
Taper Tap for Pipes General Use TPT
OSG
From: ฿ 578.00 |
---|
Special Price |
Days to Ship: |
YAMAWA MFG
From: ฿ 273.49 |
---|
Days to Ship: |
Model A Tap Series, Pointed Tap A-POT
OSG
From: ฿ 552.00 |
---|
Days to Ship: |
Parallel Tap for Pipes General Use SPT
OSG
From: ฿ 483.00 |
---|
Special Price |
Days to Ship: |
Hand Tap Set (for Metric Screws/HSS-E)【1-3 Pieces Per Package】
TRUSCO
From: ฿ 656.00 |
---|
Days to Ship: |
Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
From: ฿ 429.00 |
---|
Days to Ship: |
Pointed Tap for Stainless Steel use EX-SUS-POT
OSG
From: ฿ 237.00 |
---|
Special Price |
Days to Ship: |
Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT
YAMAWA MFG
From: ฿ 2,842.29 |
---|
Days to Ship: |
Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT
YAMAWA MFG
From: ฿ 3,282.30 |
---|
Special Price |
Days to Ship: |
MT Series High-Speed Steel Point Tap
MISUMI
From: ฿ 248.00 |
---|
Days to Ship: |
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
From: ฿ 2,779.00 |
---|
Special Price |
Days to Ship: |
Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT
YAMAWA MFG
From: ฿ 5,133.90 |
---|
Days to Ship: |
Tap For Parallel Pipe Thread (PS Screw)
TRUSCO
From: ฿ 627.42 |
---|
Special Price |
Days to Ship: |
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
From: ฿ 780.00 |
---|
Days to Ship: |
Fluteless Tap (X Performer)_S-XPF
OSG
From: ฿ 765.00 |
---|
Special Price |
Days to Ship: |
Tap For Tapered Pipe Thread (PT Screw)
TRUSCO
From: ฿ 603.00 |
---|
Special Price |
Days to Ship: |
TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
MISUMI
From: ฿ 1,219.35 |
---|
Days to Ship: |
MISUMI
From: ฿ 1,084.00 |
---|
Days to Ship: |
From: ฿ 392.00 |
---|
Days to Ship: |
From: ฿ 380.00 |
---|
Days to Ship: |
Spiral Point Tap, Ni-Based Super Heat Resistant Alloys, NI-POT-M12/-NO10, 3 Grooves
OSG
From: ฿ 527.00 |
---|
Days to Ship: |
HOZAN
From: ฿ 385.00 |
---|
Days to Ship: |
Straight Flutes Tap for Stainless Steels_EX-SUS-HT
OSG
From: ฿ 267.00 |
---|
Days to Ship: |
Hand Tap for General Use Long Shank EX-LT
OSG
From: ฿ 375.00 |
---|
Special Price |
Days to Ship: |
Pointed Tap Series TiN Coating TIN-POT
OSG
From: ฿ 518.00 |
---|
Special Price |
Days to Ship: |
Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT
OSG
From: ฿ 654.00 |
---|
Days to Ship: |
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
From: ฿ 3,540.00 |
---|
Days to Ship: |
Hand Taps for Taper Pipe Threads_Rc
YAMAWA MFG
From: ฿ 793.89 |
---|
Days to Ship: |
Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT
YAMAWA MFG
From: ฿ 1,443.24 |
---|
Days to Ship: |
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals_HL-B-NRT
OSG
From: ฿ 709.00 |
---|
Days to Ship: |
Straight Flutes Tap TiN coated_TIN-HT
OSG
From: ฿ 602.00 |
---|
Days to Ship: |
Tungsten Carbide Straight Flutes Tap_OTT
OSG
From: ฿ 2,080.00 |
---|
Days to Ship: |
Pointed Tap for General Application (with OX)_EX-H-POT
OSG
From: ฿ 221.00 |
---|
Special Price |
Days to Ship: |
Tap For Parallel Pipe Thread (PF Screw)
TRUSCO
From: ฿ 603.00 |
---|
Special Price |
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 439.44 |
---|
Days to Ship: |
Hand Tap for General Use Oxidized H-HT
OSG
From: ฿ 249.00 |
---|
Days to Ship: |
Planet Cutter Series NC Planet Cutter WX-PNC
OSG
From: ฿ 8,388.00 |
---|
Special Price |
Days to Ship: |
YAMAWA MFG
From: ฿ 302.56 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 200.00 |
---|
Special Price |
Days to Ship: |
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
From: ฿ 257.56 |
---|
Days to Ship: |
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
From: ฿ 290.81 |
---|
Special Price |
Days to Ship: |
From: ฿ 1,401.00 |
---|
Days to Ship: |
Straight Flutes Tap for Die Castings_EX-DC-HT
OSG
From: ฿ 267.00 |
---|
Days to Ship: |
Straight Flutes Tap for Cast Iron with Long Shank_EX-FC-LT
OSG
From: ฿ 468.00 |
---|
Days to Ship: |
Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT
OSG
From: ฿ 813.00 |
---|
Days to Ship: |
Tapered Tap for American Piping TiN Coating, Interlapped Type TIN-IRT
OSG
From: ฿ 2,026.00 |
---|
Special Price |
Days to Ship: |
Tapered Tap for American Piping General Use (NPTF) TPT
OSG
From: ฿ 1,349.00 |
---|
Special Price |
Days to Ship: |
ONISHI MANUFACTURING
From: ฿ 1,140.08 |
---|
Days to Ship: |
YAMAWA MFG
From: ฿ 705.88 |
---|
Days to Ship: |
Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
From: ฿ 646.70 |
---|
Special Price |
Days to Ship: |
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
From: ฿ 2,698.36 |
---|
Days to Ship: |
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
From: ฿ 3,222.86 |
---|
Days to Ship: |
Pointed Tap for Deep Holes with Long Shank_EX-LT-DH-POT
OSG
From: ฿ 739.00 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 580.00 |
---|
Days to Ship: |
Spiral Flute Tap for Through Hole for Trapezoidal Threads_SL-Tr
YAMAWA MFG
From: ฿ 13,935.81 |
---|
Days to Ship: |
From: ฿ 387.33 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 1,074.00 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 320.92 |
---|
Days to Ship: |
Oversize Straight Flutes Tap_EX-OST
OSG
From: ฿ 212.00 |
---|
Days to Ship: |
Hand Tap, High Hardness Steel, EX-SH-HT-2.5P, TH1006
OSG
From: ฿ 805.00 |
---|
Days to Ship: |
CPM Straight Flutes Tap_CPM-HT
OSG
From: ฿ 394.00 |
---|
Special Price |
Days to Ship: |
Straight Flutes Tap・Zero Tap for Die Castings with Internal Coolant Supply_VO-DC-HT
OSG
From: ฿ 1,222.00 |
---|
Days to Ship: |
Planet Cutter Series MC - Planet Cutter PNGT
OSG
From: ฿ 9,385.00 |
---|
Special Price |
Days to Ship: |
For Pointed Tap for Titanium Alloy V-TI-POT
OSG
From: ฿ 887.00 |
---|
Days to Ship: |
Long Shank・General Application_EX-LT-POT
OSG
From: ฿ 423.00 |
---|
Special Price |
Days to Ship: |
LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT
OSG
From: ฿ 1,072.00 |
---|
Special Price |
Days to Ship: |
Fluteless (Nu-Roll) Tap for Steels_NRT
OSG
From: ฿ 314.00 |
---|
Days to Ship: |
Tapered Tap for American Piping General Use (NPS) SPT
OSG
From: ฿ 933.00 |
---|
Special Price |
Days to Ship: |
Parallel Pipe Thread Tap for Stainless Steels_EX-SUS-SPT
OSG
From: ฿ 657.00 |
---|
Days to Ship: |
Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
From: ฿ 510.95 |
---|
Special Price |
Days to Ship: |
Hand Taps for Parallel Pipe Threads_PS
YAMAWA MFG
From: ฿ 623.17 |
---|
Special Price |
Days to Ship: |
MTZ Jet Mill Thread G (55°) with Oil Hole
CARMEX
From: ฿ 11,965.15 |
---|
Days to Ship: |
From: ฿ 1,975.00 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 5,939.00 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 580.00 |
---|
Days to Ship: |
HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 376
OSG
From: ฿ 1,048.00 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 390.00 |
---|
Days to Ship: |
From: ฿ 460.81 |
---|
Days to Ship: |
NACHI(FUJIKOSHI)
From: ฿ 4,810.32 |
---|
Days to Ship: |
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
From: ฿ 4,059.00 |
---|
Days to Ship: |
Pointed Tap for Stainless Steel EX-SUS-POT
OSG
From: ฿ 361.00 |
---|
Days to Ship: |
Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT
OSG
From: ฿ 632.00 |
---|
Days to Ship: |
Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT
OSG
From: ฿ 2,779.00 |
---|
Days to Ship: |
Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
From: ฿ 4,697.00 |
---|
Special Price |
Days to Ship: |
Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
From: ฿ 298.00 |
---|
Special Price |
Days to Ship: |
Pointed Tap for Thin Plate EX-SS-POT
OSG
From: ฿ 212.00 |
---|
Days to Ship: |
Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT
OSG
From: ฿ 1,901.00 |
---|
Special Price |
Days to Ship: |
Taper Tap for Pipes General Use Short Screw S-TPT
OSG
From: ฿ 632.00 |
---|
Special Price |
Days to Ship: |
Brand |
---|
Product Series |
From |
Days to Ship |
Screw size (Nominal) |
Screw Types |
work material |
Pitch (P), Number of Threading(mm) |
Tool Material Type |
Tap Type |
Hole type |
Chamfer threads (Lcf) |
Coating Type |
Coating Y/N |
Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![]() | You can add up to 6 items per a category to the compare list. ![]() | |
Brand | OSG | OSG | OSG | YAMAWA MFG | OSG | OSG | TRUSCO | OSG | OSG | YAMAWA MFG | YAMAWA MFG | MISUMI | OSG | YAMAWA MFG | TRUSCO | MISUMI | OSG | TRUSCO | MISUMI | MISUMI | YAMAWA MFG | NACHI(FUJIKOSHI) | OSG | HOZAN | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | TRUSCO | NACHI(FUJIKOSHI) | OSG | OSG | YAMAWA MFG | NACHI(FUJIKOSHI) | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | NACHI(FUJIKOSHI) | YAMAWA MFG | HOZAN | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | CARMEX | YAMAWA MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
Product Series | Hand Tap Set (for Metric Screws/HSS-E)【1-3 Pieces Per Package】 | Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT | Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Long Shank Interrupted Taps for Taper Pipe Threads, Short (ℓg) Type_LS-INT-S-PT | Spiral Point Tap, Ni-Based Super Heat Resistant Alloys, NI-POT-M12/-NO10, 3 Grooves | Long Shank Hand Taps for Taper Pipe Threads, Short (ℓg) Type_LS-S-PT | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals_HL-B-NRT | Tapered Tap for American Piping TiN Coating, Interlapped Type TIN-IRT | Spiral Flute Tap for Through Hole for Trapezoidal Threads_SL-Tr | Straight Flutes Tap・Zero Tap for Die Castings with Internal Coolant Supply_VO-DC-HT | HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 376 | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT | Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT | Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
From | ฿ 84.00 Special Price On Sale Until 30/06/2024 | ฿ 176.00 Special Price On Sale Until 31/12/2024 | ฿ 578.00 Special Price On Sale Until 30/06/2024 | ฿ 273.49 | ฿ 552.00 | ฿ 483.00 Special Price On Sale Until 30/06/2024 | ฿ 656.00 | ฿ 429.00 | ฿ 237.00 Special Price On Sale Until 30/06/2024 | ฿ 2,842.29 | ฿ 3,282.30 Special Price On Sale Until 30/06/2024 | ฿ 248.00 | ฿ 2,779.00 Special Price On Sale Until 30/06/2024 | ฿ 5,133.90 | ฿ 627.42 Special Price On Sale Until 30/06/2024 | ฿ 780.00 | ฿ 765.00 Special Price On Sale Until 30/06/2024 | ฿ 603.00 Special Price On Sale Until 30/06/2024 | ฿ 1,219.35 | ฿ 1,084.00 | ฿ 392.00 | ฿ 380.00 | ฿ 527.00 | ฿ 385.00 | ฿ 267.00 | ฿ 375.00 Special Price On Sale Until 30/06/2024 | ฿ 518.00 Special Price On Sale Until 30/06/2024 | ฿ 654.00 | ฿ 3,540.00 | ฿ 793.89 | ฿ 1,443.24 | ฿ 709.00 | ฿ 602.00 | ฿ 2,080.00 | ฿ 221.00 Special Price On Sale Until 30/06/2024 | ฿ 603.00 Special Price On Sale Until 30/06/2024 | ฿ 439.44 | ฿ 249.00 | ฿ 8,388.00 Special Price On Sale Until 30/06/2024 | ฿ 302.56 | ฿ 200.00 Special Price On Sale Until 30/06/2024 | ฿ 257.56 | ฿ 290.81 Special Price On Sale Until 30/06/2024 | ฿ 1,401.00 | ฿ 267.00 | ฿ 468.00 | ฿ 813.00 | ฿ 2,026.00 Special Price On Sale Until 30/06/2024 | ฿ 1,349.00 Special Price On Sale Until 30/06/2024 | ฿ 1,140.08 | ฿ 705.88 | ฿ 646.70 Special Price On Sale Until 30/06/2024 | ฿ 2,698.36 | ฿ 3,222.86 | ฿ 739.00 | ฿ 580.00 | ฿ 13,935.81 | ฿ 387.33 | ฿ 1,074.00 | ฿ 320.92 | ฿ 212.00 | ฿ 805.00 | ฿ 394.00 Special Price On Sale Until 30/06/2024 | ฿ 1,222.00 | ฿ 9,385.00 Special Price On Sale Until 30/06/2024 | ฿ 887.00 | ฿ 423.00 Special Price On Sale Until 30/06/2024 | ฿ 1,072.00 Special Price On Sale Until 30/06/2024 | ฿ 314.00 | ฿ 933.00 Special Price On Sale Until 30/06/2024 | ฿ 657.00 | ฿ 510.95 Special Price On Sale Until 30/06/2024 | ฿ 623.17 Special Price On Sale Until 30/06/2024 | ฿ 11,965.15 | ฿ 1,975.00 | ฿ 5,939.00 | ฿ 580.00 | ฿ 1,048.00 | ฿ 390.00 | ฿ 460.81 | ฿ 4,810.32 | ฿ 4,059.00 | ฿ 361.00 | ฿ 632.00 | ฿ 2,779.00 | ฿ 4,697.00 Special Price On Sale Until 30/06/2024 | ฿ 298.00 Special Price On Sale Until 30/06/2024 | ฿ 212.00 | ฿ 1,901.00 Special Price On Sale Until 30/06/2024 | ฿ 632.00 Special Price On Sale Until 30/06/2024 |
Days to Ship | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 19 Day(s) | 20 Day(s) | Same day | Same day | 20 Day(s) | 1 Day(s) | Same day | Same day | Same day | Same day | Same day | Same day | 5 Day(s) | 91 Day(s) | 1 Day(s) | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 5 Day(s) | 91 Day(s) | Same day | Same day | Same day | Same day | Same day | 91 Day(s) | Same day | Same day | Same day | 91 Day(s) | 5 Day(s) | 1 Day(s) | Same day | Same day | 5 Day(s) | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | 11 Day(s) | Same day | Same day | Same day | 5 Day(s) | 91 Day(s) | 91 Day(s) | Same day | 5 Day(s) | Same day | 91 Day(s) | Same day | 1 Day(s) | 1 Day(s) | 31 Day(s) | 14 Day(s) | 5 Day(s) | Same day | 91 Day(s) | 5 Day(s) | 31 Day(s) | 5 Day(s) | Same day | 91 Day(s) | 91 Day(s) | 5 Day(s) | 5 Day(s) | Same day | Same day | Same day | Same day |
Screw size (Nominal) | No.0UN ~ M100 | No.0UN ~ M48 | NPT1 ~ R7/8 | No.0 ~ M36 | No.10-32UNF ~ M24 | G1 ~ G7/8 | M3 ~ M16 | No.10UN ~ M30 | M1.4 ~ M42 | 3/8-19 | 1/8-28 ~ 3/4-14 | M2 ~ M24 | M2 ~ M20 | 1/4-19 ~ 1/8-28 | 1 ~ 3/8 | M3 ~ M10 | M1 ~ M45 | 1 ~ 3/8 | M3 ~ M10 | M3 ~ M10 | M1 ~ M24 | M3 ~ M12 | No.10UNJ ~ M12 | - | M2 ~ M20 | 1UN ~ M48 | M1.4 ~ M42 | M1 ~ M20 | M3 ~ M12 | 1/2-14 ~ 3/8-19 | 1/4-19 ~ 1/8-28 | M3 ~ M12 | M2 ~ M24 | M1.4 ~ M24 | M2 ~ M42 | 1 ~ 3/8 | M1.4 ~ M6 | M3 ~ M30 | - | No.0 ~ M40 | M2.5 ~ M30 | 1/2-20UNF ~ M30 | No.10 ~ M42 | - | M1.4 ~ M20 | M3 ~ M24 | M1.4 ~ M6 | NPT1 ~ NPT3/8 | NPT1 ~ NPT3/8 | M3 ~ M6 | M1 ~ M6 | 1'-11 ~ 4'-11 | No.10-32UNF ~ M24 | M2 ~ M20 | M3 ~ M24 | M1.4 ~ M24 | Tr 10 ~ Tr 30 | M3 ~ M6 | M3 ~ M8 | M3 ~ M24 | M3 ~ M16 | M12 ~ M20 | M3 ~ M48 | M6 ~ M12 | - | No.10UNJ ~ M12 | W1 ~ M36 | M3 ~ M30 | No.3UN ~ M16 | NPS1 ~ NPS4 | G1 ~ G3/8 | 1/4-20UNC ~ M30 | 1 ~ 4 | - | No.2 ~ No.6 | M4 ~ M12 | M2 ~ M24 | - | M3 ~ M12 | M3 ~ M6 | M3 ~ M12 | M3 ~ M12 | No.10UN ~ 7/16UN | No.10UN ~ M12 | M3 ~ M12 | M3 ~ M20 | M1.4 ~ M48 | M2 ~ M12 | R1 ~ R3/8 | NPT1 ~ R3/8 |
Screw Types | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Whitworth / Sewing Machine | Taper for Pipe | Meter / unified / Sewing Machine | Meter / unified | Parallel for Pipes | Meter | Meter / unified | Meter | Taper for Pipe | Taper for Pipe | Meter | Meter | Taper for Pipe | Parallel for Pipes | Meter | Meter | Taper for Pipe | Meter | Meter | Meter | Meter | Meter / unified | Meter | Meter | Meter / unified / Whitworth | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Meter | Parallel for Pipes | Meter | Meter | Meter / unified / Taper for Pipe | Meter / unified / Whitworth / Sewing Machine | Meter | Meter / unified / Whitworth | Meter / unified / Whitworth | - | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter | Meter | Taper for Pipe | Meter / unified | Meter | Meter | Meter | Trapezoid | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter / unified | Meter / Whitworth | Meter | Meter / unified | Parallel for Pipes | Parallel for Pipes | Meter / unified / Whitworth | Parallel for Pipes | Parallel for Pipes | Meter | Meter | Meter | - | Meter | Meter | Meter | Meter | unified / Whitworth | Meter / unified | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe |
work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Nickel-based alloy (Inconel, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Titanium Alloy (Ti-6Al-4V, etc)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○/◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] |
Pitch (P), Number of Threading(mm) | 0.25 ~ 80 | 0.25 ~ 80 | 8 ~ 28 | 0.2 ~ 80 | 0.25 ~ 3 | 11 ~ 28 | 0.5 ~ 2 | 0.45 ~ 40 | 0.3 ~ 4.5 | - | - | 0.4 ~ 3 | 0.4 ~ 2.5 | - | - | 0.5 ~ 1.5 | 0.2 ~ 4.5 | - | 0.5 ~ 1.5 | 0.5 ~ 1.5 | 0.25 ~ 3 | 0.5 ~ 1.75 | 0.5 ~ 40 | - | 0.4 ~ 2.5 | 0.4 ~ 28 | 0.3 ~ 4.5 | 0.25 ~ 2.5 | 0.5 ~ 1.75 | - | - | 0.5 ~ 1.75 | 0.4 ~ 3 | 0.3 ~ 3 | 0.4 ~ 4.5 | - | 0.3 ~ 1 | 0.5 ~ 3.5 | 1 ~ 28 | 0.25 ~ 80 | 0.35 ~ 3 | 0.4 ~ 3 | 0.3 ~ 56 | - | 0.3 ~ 2.5 | 0.5 ~ 3 | 0.3 ~ 1 | 11.5 ~ 27 | 11.5 ~ 27 | 0.5 ~ 1 | 0.25 ~ 1 | - | 0.3 ~ 3 | 0.4 ~ 2.5 | 0.5 ~ 3 | 0.25 ~ 3 | 2 ~ 6 | 0.5 ~ 1 | 0.5 ~ 1.25 | 0.5 ~ 3 | 0.5 ~ 2 | 1.5 ~ 2.5 | 0.5 ~ 5 | 1 ~ 1.75 | 1 ~ 19 | 0.5 ~ 40 | 0.4 ~ 20 | 0.5 ~ 3.5 | 0.25 ~ 48 | 8 ~ 27 | 11 ~ 28 | 0.5 ~ 3.5 | 11 ~ 28 | - | 0.45 ~ 0.79 | 0.7 ~ 1.75 | 0.25 ~ 3 | - | 0.35 ~ 1.75 | 0.5 ~ 1 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 8 ~ 48 | 0.5 ~ 40 | 0.5 ~ 1.75 | 0.5 ~ 2.5 | 0.3 ~ 5 | 0.4 ~ 1.75 | 11 ~ 28 | 11 ~ 28 |
Tool Material Type | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Cobalt HSS | Carbide | High-speed steel | SKS | Vanadium High-Speed Steel | Powder high-speed steel / Vanadium High-Speed Steel | SKS | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | SKS | High-speed steel | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Alloy HSS | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Cobalt HSS | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Carbide | Powder high-speed steel | Carbide | Alloy HSS | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel |
Tap Type | Hand Tap | Point tap | Tap for pipes | Hand Tap | Point tap | Tap for pipes | Hand Tap | Hand Tap | Point tap | Tap for pipes | Tap for pipes | Point tap | Hand Tap | Tap for pipes | Tap for pipes | Hand Tap | Roll tap | Tap for pipes | Roll tap | Hand Tap | Hand Tap | Point tap | Point tap | Tap wrench | Hand Tap | Hand Tap | Point tap | Roll tap | Roll tap | Tap for pipes | Tap for pipes | Roll tap | Hand Tap | Hand Tap | Point tap | Tap for pipes | Roll tap | Hand Tap | Thread cutter | Point tap | Spiral Tap | Hand Tap | Point tap | - | Hand Tap | Hand Tap | Roll tap | Tap for pipes | Tap for pipes | Thread-cutting-related tool | Roll tap | Tap for pipes | Hand Tap | Point tap | Point tap | Point tap | Spiral Tap | Hand Tap | Point tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Thread cutter | Point tap | Point tap | Point tap | Roll tap | Tap for pipes | Tap for pipes | Point tap | Tap for pipes | Thread cutter | Roll tap | Spiral Tap | Spiral Tap | - | Spiral Tap | Point tap | Hand Tap | Hand Tap | Point tap | Hand Tap | Hand Tap | Hand Tap | Point tap | Point tap | Tap for pipes | Tap for pipes |
Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
Chamfer threads (Lcf) | 1.5P ~ 9P | 5P | 2.5P | 1.5P ~ 5P | 5P | 1.5P ~ 4P | - | 1.5P ~ 9P | 4P | 2.5P | 3P | 5P | 3P | 3P | 4.5P | 1.5P ~ 9P | 2P ~ 4P | 1.5P | 2P ~ 4P | 1.5P ~ 3P | 1.5P ~ 5P | 5 | 5P | - | 1.5P ~ 5P | 1.5P ~ 5P | 5P | 2P | 2P | 2.5P | 2.5P | 2P | 1.5P ~ 5P | 1.5P ~ 3P | 5P | 4.5P | 4P | 1.5P ~ 5P | - | 5P | 2.5 | 1.5P ~ 4P | 5P | - | 1.5P ~ 3P | 1.5P ~ 3P | 8P | 2.5P | 2.5P | - | 2P ~ 4P | 2.5P | 1.5P ~ 3P | 5P | 4P | 5 | 22P ~ 30P | - | 5P | 1.5P ~ 5P | 1.5P ~ 5P | 2.5P | 2P ~ 5P | 1.5P | - | 5P | 5P | 6P | 2P ~ 4P | 4P | 4P | 5P | 1.5P ~ 3.5P | - | 2P | 2.5 | 1.5 ~ 2.5 | - | 2.5 | 5 | 1.5P ~ 3P | 2.5P ~ 5P | 4P | 1.5P ~ 5P | 1.5P | 1.5P ~ 3P | 5P | 5P | 3P | 2.5P |
Coating Type | Non-Coated | Non-Coated | Non-Coated | - | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | TiCN / Other | - | - | - | TiCN | - | TiN | - | - | - | Non-Coated | - | Non-Coated | Non-Coated | TiN | TiCN | Non-Coated | - | - | Non-Coated | TiN | Non-Coated | Non-Coated | - | - | Non-Coated | TiAlN | - | Non-Coated | - | - | - | Non-Coated | Non-Coated | TiCN | TiN | Non-Coated | Non-Coated | TiN | - | - | TiAlN | Non-Coated | TiCN | - | - | TiN | - | Non-Coated | Non-Coated | Non-Coated | TiCN | TiN | TiCN | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | - | - | Nitriding Treatment | TiCN | TiCN | TiCN | - | - | - | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated |
Coating Y/N | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | - | Available | Available | Available | Available | NA | NA | Available | NA | NA | Available | NA | Available | NA | NA | Available | NA | NA | NA | NA | Available | Available | Available | NA | Available | NA | NA | NA | NA | NA | Available | Available | Available | Available | - | NA | - | Available | Available | NA | NA | NA | NA | NA | NA | Available | NA |
Overall Length (L)(mm) | 30 ~ 275 | 30 ~ 185 | 55 ~ 170 | 36 ~ 155 | 34 ~ 120 | 55 ~ 170 | 46 ~ 95 | 46 ~ 155 | 34 ~ 175 | 100 ~ 200 | 100 ~ 150 | 40 ~ 120 | 40 ~ 105 | 150 | 55 ~ 120 | 46 ~ 75 | 30 ~ 220 | 55 ~ 120 | 46 ~ 75 | 46 ~ 75 | 36 ~ 120 | 46 ~ 82 | 46 ~ 85 | 80 | 40 ~ 105 | 80 ~ 300 | 34 ~ 175 | 30 ~ 105 | 46 ~ 82 | 59 ~ 87 | 100 | 48 ~ 90 | 40 ~ 120 | 34 ~ 120 | 40 ~ 175 | 55 ~ 120 | 34 ~ 62 | 46 ~ 135 | 60 ~ 120 | 36 ~ 195 | 44 ~ 135 | 42 ~ 135 | 36 ~ 175 | 46 ~ 75 | 34 ~ 105 | 100 ~ 200 | 34 ~ 62 | 55 ~ 95 | 55 ~ 120 | 66 ~ 69 | 36 ~ 62 | 55 ~ 170 | 34 ~ 120 | 40 ~ 105 | 120 ~ 200 | 34 ~ 120 | 160 ~ 300 | - | 46 ~ 70 | 46 ~ 120 | 46 ~ 95 | 82 ~ 105 | 46 ~ 185 | 62 ~ 82 | 80 ~ 210 | 46 ~ 85 | 80 ~ 300 | 100 ~ 200 | 30 ~ 95 | 55 ~ 170 | 55 ~ 95 | 46 ~ 135 | 55 ~ 170 | 64 ~ 101 | 42 ~ 52 | 52 ~ 82 | 40 ~ 120 | 110 | 46 ~ 82 | 46 ~ 62 | 46 ~ 82 | 46 ~ 82 | 44 ~ 125 | 100 ~ 150 | 46 ~ 82 | 100 ~ 150 | 34 ~ 185 | 40 ~ 82 | 59 ~ 109 | 55 ~ 155 |
Loading...
How can we improve?
How can we improve?