(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Holding Tools for O.D. Tuning（Selfishly：No-hand）
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 97 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,358.00 Days to Ship: 
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
TLHR TL Tool Bit, for Outer Diameter Machining and Profiling
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); clamp method: non-ISO standardFrom: ฿ 3,373.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISCAR
[Features]
Clamp wedge removable tool block.
[Applications]
For fixing.From: ฿ 11,399.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVVB Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,554.89 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,800.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,202.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With SN○○ Inserts, LL Tool Bit for Outer Diameter and Chamfer Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,638.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024HELI GRIP, DO-GRIP, Blade for Grooving, Multifunction Machining
ISCAR
[Features]
Integrated tongue grip holder for parting and grooving that employs a newly developed clamping methodFrom: ฿ 6,372.00 Special Price Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
DVVN Type (External Diameter/Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,025.27 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 19,317.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDNN
TUNGALOY
Negative for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDPN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETENN
TUNGALOY
Negative for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Screw On Type MVVNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 6,777.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDPNN
TUNGALOY
Negative for Outer Diameter Profiling MillingFrom: ฿ 5,458.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTENN
TUNGALOY
A multi-clamp method that combines the lock pin method and the clamp-on method.From: ฿ 5,458.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 6,045.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDNCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDCN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDPN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVVCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,606.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,327.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,482.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,648.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 7,841.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,598.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CDNNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 7,292.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 7,292.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)From: ฿ 5,114.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With RC○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)From: ฿ 3,982.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,358.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VN○○ Inserts, MP Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 5,251.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With VN Inserts, Double-Clamp Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
The double-clamp tool bite achieving outstanding machining with a simple clamping mechanism.
[Features]
· Single action double clamp mechanism is adopted.
· New and optimized clamp piece.
· Improved vibration-resistance and chip discharge.
· Adopts special surface treatment.
· Clamp screw with Torx hole on both ends.
· New double clamp type.
· Insert is securely clamped.
· Excellent blade-tip position accuracy.
· Economic negative insert.
· A series of small inserts is also available.
[Application]
· Used for machining holder for turning.From: ฿ 5,251.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt), R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S), pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
PCLN/PCMN for Combined Machining, for Outer Diameter / End Face Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024MITSUBISHI MATERIALS
The Future of Next-Generation MachiningFrom: ฿ 999,999,999.00 Special Price Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
PDJN/PDNN for Combined Machining, for Outer Diameter / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
DDJN/DDNN for Combined Machining, for Outer Diameter / Profile Machining, Double Clamp Type
MITSUBISHI MATERIALS
The Future of Next-Generation MachiningFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Tool Bit Compatible with DC○○ Insert, SP Tool Bit for Outer Diameter / Profile Machining SDNC
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,264.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Block SGTBF (Right-Angle Type)
ISCAR
[Features]
Right angle type tool block.
[Applications]
Cut-off, deep grooving, flange grooving.From: ฿ 10,014.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024From: ฿ 27,425.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tool Block SGTBU (Clamp Division Type, CNC Lathe)
ISCAR
[Features]
Clamp wedge removable tool block.
[Applications]
For fixing.From: ฿ 14,287.00 Special Price Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 6,847.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN
ISCAR
[Applications]
Can be used for external machining.
[Features]
Supports both left and right cutting directions.From: ฿ 4,098.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 7,757.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
PSDN Type (External Diameter, Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 2,711.69 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
WTEN-N Type (outer diameter, chamfer machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standardFrom: ฿ 2,911.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MVVN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)From: ฿ 4,593.19 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
PVVN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,063.41 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSDN Type (Outer Diameter Machining / Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,119.35 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CRDN Type (Outer Diameter Machining / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,401.57 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CRDN-A Type (Outer Diameter Machining / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 5,753.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSDN-A Type (Outer Diameter Machining / Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 5,753.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SDNC Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 2,078.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 19,960.96 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DSDNN
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 13,481.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PSDNN
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 15,446.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, 177.9
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 6,231.79 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107 Cutting Unit For Turning, C-SRDCN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 24,589.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107 Cutting Unit For Turning, C-SVVBN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 17,204.72 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroPlex TT Multi-Function Turning Tool, C-TB-CN
SANDVIK
Equipped with 2 turning inserts in the same tool, greatly reducing tool change time
Space-saving tool pot in tool magazineFrom: ฿ 57,925.46 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRDCN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 21,627.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, C5-DSDNN-12-2
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12
SANDVIK
Tool that combines external turning and internal turning boring with two inserts in the same tool
Good chip control and long tool lifeFrom: ฿ 42,819.10 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 25,421.42 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 37,278.43 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 4,807.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,936.02 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DDNNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DSDNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DVVNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 15,446.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 7,224.10 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 5,030.24 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 7,739.92 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN
SANDVIK
[Features]
Extremely high clamp rigidity
The T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precision
High-precision machining
For profile turning.From: ฿ 7,076.42 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 4,807.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, SDNCN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, SVVBN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 13,060.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Positive Inserts, TR-V13JBR/L
SANDVIK
[Features]
Extremely high clamp rigidity
The T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precision
High-precision machining
For profile turning.From: ฿ 6,715.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 5,650.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupFrom: ฿ 6,543.81 Days to Ship:
6 Day(s)
6 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | ISCAR | KYOCERA | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | ISCAR | KYOCERA | SANDVIK | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | ISCAR | ISCAR | ISCAR | ISCAR | ISCAR | ISCAR | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing | TLHR TL Tool Bit, for Outer Diameter Machining and Profiling | Tool Bit Applicable With SN○○ Inserts, LL Tool Bit for Outer Diameter and Chamfer Processing | HELI GRIP, DO-GRIP, Blade for Grooving, Multifunction Machining | Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID | Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETENN | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDPNN | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTENN | P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN | T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN | T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN | C Type with Dimples for Ceramic Insert, Double-Clamp Type CDNNN | C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN | Tool Bit Applicable With RC○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing | RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit | Tool Bit Applicable With VN○○ Inserts, MP Tool Bit for Outer Diameter and Profile Processing | Applicable With VN Inserts, Double-Clamp Tool Bit for Outer Diameter and Profile Processing | PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining | PCLN/PCMN for Combined Machining, for Outer Diameter / End Face Processing | PDJN/PDNN for Combined Machining, for Outer Diameter / Profile Machining | DDJN/DDNN for Combined Machining, for Outer Diameter / Profile Machining, Double Clamp Type | Tool Bit Compatible with DC○○ Insert, SP Tool Bit for Outer Diameter / Profile Machining SDNC | Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN | Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRDCN | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, C5-DSDNN-12-2 | Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12 | Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP | Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4 | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80 | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN | Outer-Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN | Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S | Outer-Diameter Turning - Shank Tool Bit For Positive Inserts, TR-V13JBR/L | Outer Diameter Turning - Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11 | |||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 4,358.00 | ฿ 3,373.00 | ฿ 11,399.00 | ฿ 2,554.89 | ฿ 4,470.00 | ฿ 4,800.00 | ฿ 5,202.00 | ฿ 3,638.00 | ฿ 6,372.00 Special Price On Sale Until 30/06/2024 | ฿ 3,025.27 | ฿ 19,317.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 6,777.00 | ฿ 5,458.00 | ฿ 5,458.00 | ฿ 6,045.00 Special Price On Sale Until 30/06/2024 | ฿ 4,470.00 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 5,606.00 | ฿ 3,327.00 | ฿ 999,999,999.00 | ฿ 4,470.00 | ฿ 3,482.00 | ฿ 3,648.00 | ฿ 7,841.00 | ฿ 3,598.00 | ฿ 7,292.00 | ฿ 7,292.00 | ฿ 5,114.00 | ฿ 3,982.00 | ฿ 4,358.00 | ฿ 5,251.00 | ฿ 5,251.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 Special Price On Sale Until 30/06/2024 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 3,844.00 | ฿ 5,264.00 | ฿ 10,014.00 | ฿ 27,425.00 Special Price On Sale Until 30/06/2024 | ฿ 14,287.00 Special Price On Sale Until 30/06/2024 | ฿ 6,847.00 | ฿ 4,098.00 | ฿ 7,757.00 | ฿ 2,711.69 | ฿ 2,911.00 | ฿ 4,593.19 | ฿ 3,063.41 | ฿ 3,119.35 | ฿ 3,401.57 | ฿ 5,753.46 | ฿ 5,753.46 | ฿ 2,078.00 | ฿ 19,960.96 | ฿ 13,481.00 | ฿ 15,446.00 | ฿ 6,231.79 | ฿ 24,589.35 | ฿ 17,204.72 | ฿ 57,925.46 | ฿ 16,691.00 | ฿ 12,091.00 | ฿ 21,627.00 | ฿ 16,691.00 | ฿ 42,819.10 | ฿ 25,421.42 | ฿ 37,278.43 | ฿ 4,807.00 | ฿ 8,936.02 | ฿ 8,449.00 | ฿ 12,836.35 | ฿ 12,836.35 | ฿ 12,836.35 | ฿ 15,446.00 | ฿ 12,836.35 | ฿ 7,224.10 | ฿ 5,030.24 | ฿ 7,739.92 | ฿ 7,076.42 | ฿ 4,807.00 | ฿ 12,836.35 | ฿ 13,060.00 | ฿ 6,715.00 | ฿ 5,650.00 | ฿ 6,543.81 |
| Days to Ship | 15 Day(s) | 1 Day(s) | 40 Day(s) | 5 Day(s) | 19 Day(s) | 40 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Same day | 6 Day(s) | Quote | Quote | Quote | 19 Day(s) | 40 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | Quote | 19 Day(s) | 40 Day(s) | 40 Day(s) | 15 Day(s) | 10 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | Quote | Quote | Quote | Quote | Quote | 15 Day(s) | 15 Day(s) | 40 Day(s) | 40 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 12 Day(s) | 5 Day(s) | 6 Day(s) | 14 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) |
| Applicable Tip Shape | V (35° Diamond-Shaped) | - | Other | V (35° Diamond-Shaped) | R (Circular) | V (35° Diamond-Shaped) | S (Rectangular) | S (Rectangular) | Other | V (35° Diamond-Shaped) | R (Circular) | S (Rectangular) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | T (Triangle) | R (Circular) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | R (Circular) | R (Circular) | - | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) / R (Circular) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | Other | Other | Other | Other | Other | R (Circular) | Other | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | S (Rectangular) | R (Circular) | R (Circular) | S (Rectangular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | T (Triangle) | R (Circular) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | R (Circular) | R (Circular) | C (80° Diamond-Shape) / R (Circular) | S (Rectangular) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) | S (Rectangular) | V (35° Diamond-Shaped) | R (Circular) | S (Rectangular) | D (55° Diamond-Shape) | S (Rectangular) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) |
| Applicable Chip Clearance Angle | Pozidriv | Pozidriv | - | Pozidriv | Pozidriv | Negative | Negative | Negative | - | Negative | - | Negative | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | - | - | - | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | - | - | - | - | - | - | - | - | Pozidriv | - | - | - | - | - | Pozidriv | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - |
| Selfishly | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Application | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Profiling | Profiling | Outer Diameter / Profiling | Outer Diameter / Chamfer | Outer Diameter / Chamfer | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Chamfer | Outer Diameter / Chamfer | Outer Diameter / Chamfer | Profiling | Profiling | Outer Diameter / Chamfer | Profiling | Outer Diameter / Profiling | Outer Diameter | Outer Diameter | Profiling | Profiling | Profiling | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Chamfer | Outer Diameter / Profiling | Outer Diameter / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Chamfer | Outer Diameter / Profiling | Outer Diameter / End Face / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / Post-Grinding | End Face | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter / Profiling / Chamfer / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling / Post-Grinding |
| Clamp Shape | Screw-on | - | Other | Screw-on | Screw-on | Cable clamp | Cable clamp | Lever lock | Other | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Other | Other | Other | Other | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Other | Other | Screw-on | Cable clamp | Cable clamp | Lever lock | Lever lock | Clamp-on | Clamp-on | Screw-on | Lever lock | Screw-on | Lever lock | Cable clamp | Screw-on / Lever lock | Lever lock | Cable clamp | Lever lock | Cable clamp | Screw-on | Other | Other | Other | Other | Other | Screw-on | Other | Lever lock | Wedge Lock | Double Clamp | Pin Lock | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Screw-on | Cable clamp | - | - | - | - | - | - | - | Clamp-on | Clamp-on | Cable clamp | - | - | Lever lock | Clamp-on | Cable clamp | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Pin Lock | Pin Lock | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on |
| Shank height(mm) | 16 ～ 25 | 20 ～ 32 | 16 | - | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 12 ～ 25 | 26 ～ 45 | - | 50 | 20 ～ 25 | 16 ～ 25 | 12 ～ 25 | 20 ～ 32 | 25 | 25 | 20 ～ 40 | 16 ～ 25 | 10 ～ 16 | 10 ～ 16 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 16 ～ 25 | 25 | 25 | 16 ～ 25 | 20 ～ 32 | 16 | 20 ～ 25 | 20 ～ 25 | - | - | - | - | - | 8 ～ 16 | - | 25 ～ 32 | 32 ～ 50 | 16 ～ 40 | 26 ～ 32 | 25 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 25 | - | - | 0 | - | - | - | - | - | - | - | - | - | 32 | - | - | - | - | - | 32 | 16 ～ 40 | 32 ～ 40 | 32 | - | - | - | 20 ～ 32 | - | 12 ～ 16 |
| Shank width(mm) | 16 ～ 25 | 20 ～ 32 | - | - | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 12 ～ 32 | 1.6 ～ 5.2 | - | 40 | 20 ～ 25 | 16 ～ 25 | 12 ～ 25 | 20 ～ 25 | 25 | 25 | 20 ～ 40 | 16 ～ 25 | 10 ～ 16 | 10 ～ 16 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 16 ～ 25 | 25 | 25 | 16 ～ 25 | 20 ～ 32 | 16 | 20 ～ 25 | 20 ～ 25 | - | - | - | - | - | 8 ～ 16 | - | - | - | - | 2.4 ～ 4 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | 9 ～ 13 | - | - | - | - | - | - | - | - | - | - | - | 25 | 25 | - | - | - | - | - | 25 | 16 ～ 40 | 25 ～ 40 | 25 | - | - | - | 20 ～ 25 | - | 12 ～ 16 |
Loading...
Related Categories to Holding Tools for O.D. Tuning
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?