(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 1/7/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Holding Tools for O.D. Tuning（Applicable Chip Clearance Angle：Pozidriv）
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 135 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship: 
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
CTCH/CTDH/CTEH Outer Diameter Parting-Off
MITSUBISHI MATERIALS
[Features]
· For external shape machining.
· Can be mounted on a gang-type automatic lathe.
· Good sharpness and excellent cutting chip discharge.From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standardFrom: ฿ 3,056.63 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
KYOCERA
[Features]
·This is SDJC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and profilingFrom: ฿ 2,175.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,500.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVVB Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,554.89 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSXGR/L
TUNGALOY
No Offset Type for Front and Back Turning CuttingFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With TC○○ Inserts, , SP Tool Bit for Outer Diameter Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,945.00 Days to Ship:
13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
TE○○ Insert Compatible Bit, for Outer Diameter Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter; compatible insert shape: T (triangle); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)From: ฿ 5,424.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
TLHR TL Tool Bit, for Outer Diameter Machining and Profiling
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); clamp method: non-ISO standardFrom: ฿ 3,373.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With XC Inserts, Profile Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
Double clamp type profiling tool.
[Features]
· Tool consolidation is made possible and cycle time is shortened.
· Adopts highly reliable double clamp.
· Achieves good chip disposal performance with a breaker shape suitable for profiling.
· Screw-on type.
· Uses a 25° two-bolt insert.
· Pulling up of max. 60° is possible.
[Application]
· For profiling.
· 300° spherical surface processing is possible.From: ฿ 7,550.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
SCLC Type (External Diameter/End-Face Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 2,259.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 2,805.76 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S...SDUC Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 7,786.68 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11
SANDVIK
[Features]
An outer-diameter turning tool featuring stable insert clamping and excellent repeatability.
Produces an unimpeded flow of cutting chips.
Requires little space for operation.
Features a small number of component parts.
For outer-diameter turning (bore cutting) operations.From: ฿ 4,807.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L
TUNGALOY
Screw-on outer diameter, profiling tools.
[Features]
·Approach angle: 117.5°.
·Uses a positive type insert.
[Applications]
·For copy cutting.From: ฿ 5,606.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Y-Pro Series S Type Screw-on Type SYJBR/L
TUNGALOY
Positive for Outer Diameter, Spherical Surface, and Taper CuttingFrom: ฿ 4,470.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)From: ฿ 4,461.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
This is a 2-corner type threading holder for compact automatic lathes. It is for outer diameter processing.From: ฿ 6,041.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Cutting PN/CP/CE/SP
TUNGALOY
TAC cartridge. Plentiful types and models to support a wide range of work materialsFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
SCLC-FF Type (without Offset) (External Diameter / End Face Machining)
KYOCERA
[Features]
·This is SCLC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and flangeFrom: ฿ 2,612.52 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 3,056.63 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVJB Type (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 3,025.27 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S...SVUB (C) Type (Outer Diameter and Undercutting Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 5° (B); clamp method: screw-on (S)From: ฿ 9,280.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 4,807.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBPR/L
TUNGALOY
Positive for Outer Diameter CuttingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDPN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSPR/L
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTCPR/L
TUNGALOY
A clamp-on tool.
[Features]
·Approach angle: 90°.
·Insert used: Posi, equilateral triangle.
[Applications]
·For edge cutting.From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTFPR/L
TUNGALOY
A clamp-on tool.
[Features]
·Approach angle: 91°.
·Insert used: Posi, equilateral triangle.
[Applications]
·For edge cutting.From: ฿ 5,535.00 Days to Ship:
13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTGPR/L
TUNGALOY
Positive for Outer Diameter CuttingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
J-Series, Type JT / Outer Diameter Cutting, Screw-On Type JSDJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSCGCR/L
TUNGALOY
Positive for Outer Diameter CuttingFrom: ฿ 3,326.46 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSCLCR/L
TUNGALOY
Positive for Outer Diameter and End Face Cutting (with Screws and Wrench)From: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDFCR/L
TUNGALOY
A screw-on external holder with an approach angle of 91°.
[Features]
·For edge cutting.
·Clamp shape: screw on.From: ฿ 3,616.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDN3CR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,326.46 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSEGR/L
TUNGALOY
For Outer Diameter Cutting / Back Turning, No OffsetFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-SDUCL
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 7,366.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSTACR/L
TUNGALOY
Positive for Outer Diameter Cutting, No OffsetFrom: ฿ 3,326.46 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-TBL3
TUNGALOY
For Outer Diameter Cutting / Back Turning, PositiveFrom: ฿ 7,366.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L
TUNGALOY
Positive for Outer Diameter and End Face Cutting, No OffsetFrom: ฿ 3,393.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSXBR/L
TUNGALOY
For Outer Diameter Cutting / Back Turning, No OffsetFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 6,045.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRGCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 9,196.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SCLCR/L
TUNGALOY
Positive for Outer Diameter and End Face CuttingFrom: ฿ 5,129.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDNCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDQCR/L
TUNGALOY
A screw-on tool.
[Features]
·Approach angle: 107.5°.
·Insert used: Positive 55°, rhombic.
[Applications]
·For copy cutting.From: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRACR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,648.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRGCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,847.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDCN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDPN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type STACR/L
TUNGALOY
Positive for Outer Diameter CuttingFrom: ฿ 5,129.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L
TUNGALOY
A screw-on tool.
[Features]
·Approach angle: 107.5°.
·Insert used: Positive 35°, rhombic.
[Applications]
·For copy cutting.From: ฿ 6,521.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,129.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVVCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,606.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,327.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Turn Feed X-Type, Double-Clamp Type XWXPR/L
TUNGALOY
Positive for Outer Diameter and End Face CuttingFrom: ฿ 8,804.55 Special Price Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With CC○○ Inserts, SP Tool Bit for Outer Diameter and End Surface Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With DC○○Inserts, SP Tool Bit for Outer Diameter and Profile Processing, SDJC
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)From: ฿ 5,114.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
RC○○ Insert Compatible Bit for External Diameter, End Face and Profiling SP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,840.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With RC○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)From: ฿ 3,982.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,358.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,118.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
TE○○ Insert Compatible Bit, for End Surface Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)From: ฿ 5,869.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts, SP Tool Bit for End Surface and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 5,595.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 15° (D); clamp method: screw-on (S)From: ฿ 5,114.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Features]
· For external shape machining.
· Can be mounted on an automatic cam-driven lathe.
· 7 mm to 12 mm small shank.
· A single holder enables front turning, back turning, groove machining, thread machining and part-off machining.
· Ideal for machining parts with a small diameter of ø5 mm or less.From: ฿ 8,031.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
BTAH/BTVH/CTBH Outer Diameter Post-Grinding Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and post-pull; compatible insert shape: B (82° parallelogram), non-ISO standard; clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
GTAH/GTBH/GTCH Outer Diameter Groove Processing
MITSUBISHI MATERIALS
[Features]
· For external shape machining.
· Can be mounted on a gang-type automatic lathe.
· 8 mm to 16 mm small shank.
· Back clamp can be operated.
· Vertical blade design and high rigidity.
· Economical with 3 corner inserts.From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Pre-Grinding, Profiling, End Face Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI, External Front Turning, No Offset
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter; compatible insert shape: V (35° two-bolt), D (55° two-bolt), C (80° two-bolt), V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt), R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S), pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
SVPB for Combined Machining, for End Face / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Tool Bit Compatible with DC○○ Insert, SP Tool Bit for Outer Diameter / Profile Machining SDNC
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
SUMITOMO ELECTRIC HARDMETAL
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,019.02 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type J, Positive / Screw On Type JSDJ2XR/L
TUNGALOY
Used for outer diameter end face cutting. Achieves high economy due to the new type of multi corner insertFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type J, Positive / Screw On Type JSWL2XR/L
TUNGALOY
Used for outer diameter end face cutting. Achieves high economy due to the new type of multi corner insert
* These tools use left-hand inserts as an exception.From: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type J Positive / Rear Clamp Type JPDJ2XR/L
TUNGALOY
Used for outer diameter end face cutting. Achieves high economy due to the new type of multi corner insertFrom: ฿ 4,287.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type J Positive / Rear Clamp Type JPWL2XR/L
TUNGALOY
[Features]
· "DOMINI TURN Series" are small O.D. tools for turning that achieve high economy due to the new type of multi corner insert.From: ฿ 4,287.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: Positive 7 (C), negative 0° (N); clamp method: pin lock (P), non-ISO standardFrom: ฿ 5,565.31 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
PRGC-BE Type (External Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)From: ฿ 5,816.18 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVLP Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 5,000.85 Days to Ship:
5 Day(s)
5 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | KYOCERA | KYOCERA | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | KYOCERA | SANDVIK | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | TUNGALOY | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | SUMITOMO ELECTRIC HARDMETAL | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing | ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling) | SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder | SVPB Type (outer diameter, end surface, profile, relief machining) | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSXGR/L | Tool Bit Applicable With TC○○ Inserts, , SP Tool Bit for Outer Diameter Processing | TE○○ Insert Compatible Bit, for Outer Diameter Machining, Aluminum Alloy Bit | TLHR TL Tool Bit, for Outer Diameter Machining and Profiling | Applicable With XC Inserts, Profile Tool Bit for Outer Diameter and Profile Processing | SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining) | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11 | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDJCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L | SCLC-FF Type (without Offset) (External Diameter / End Face Machining) | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | S...SVUB (C) Type (Outer Diameter and Undercutting Machining) | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBPR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSPR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTCPR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTFPR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CTGPR/L | J-Series, Type JT / Outer Diameter Cutting, Screw-On Type JSDJCR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSCGCR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSCLCR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDFCR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDN3CR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSEGR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-SDUCL | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSTACR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-TBL3 | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSXBR/L | P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN | P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRGCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SCLCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDQCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRACR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRGCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type STACR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L | T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN | T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN | Tool Bit Applicable With CC○○ Inserts, SP Tool Bit for Outer Diameter and End Surface Processing | Tool Bit Applicable With DC○○Inserts, SP Tool Bit for Outer Diameter and Profile Processing, SDJC | RC○○ Insert Compatible Bit for External Diameter, End Face and Profiling SP Bit | Tool Bit Applicable With RC○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing | RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit | TE○○ Insert Compatible Bit, for End Surface Machining, Aluminum Alloy Bit | Tool Bit Applicable With VC○○ Inserts, SP Tool Bit for End Surface and Profile Processing | VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit | PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining | SVPB for Combined Machining, for End Face / Profile Machining | Tool Bit Compatible with DC○○ Insert, SP Tool Bit for Outer Diameter / Profile Machining SDNC | PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling) | |||||||||||||||||||||||||||||||||
| From | ฿ 3,844.00 | ฿ 999,999,999.00 | ฿ 3,056.63 | ฿ 2,175.00 | ฿ 2,500.00 | ฿ 2,554.89 | ฿ 3,393.00 | ฿ 3,945.00 | ฿ 5,424.00 | ฿ 3,373.00 | ฿ 7,550.00 | ฿ 2,259.00 | ฿ 2,805.76 | ฿ 7,786.68 | ฿ 4,807.00 | ฿ 4,470.00 | ฿ 4,470.00 | ฿ 5,606.00 | ฿ 4,470.00 | ฿ 4,461.00 | ฿ 6,041.00 | ฿ 999,999,999.00 | ฿ 2,612.52 | ฿ 3,056.63 | ฿ 3,025.27 | ฿ 9,280.00 | ฿ 4,807.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 5,535.00 | ฿ 999,999,999.00 | ฿ 3,393.00 | ฿ 3,326.46 | ฿ 3,393.00 | ฿ 3,616.00 | ฿ 3,326.46 | ฿ 3,393.00 | ฿ 7,366.00 | ฿ 3,326.46 | ฿ 7,366.00 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 6,045.00 Special Price On Sale Until 30/06/2024 | ฿ 9,196.00 | ฿ 5,129.00 | ฿ 4,470.00 | ฿ 4,470.00 | ฿ 3,648.00 | ฿ 3,847.00 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 5,129.00 | ฿ 6,521.00 | ฿ 5,129.00 | ฿ 5,606.00 | ฿ 3,327.00 | ฿ 999,999,999.00 | ฿ 4,470.00 | ฿ 4,470.00 | ฿ 4,470.00 | ฿ 8,804.55 Special Price On Sale Until 30/06/2024 | ฿ 3,844.00 | ฿ 3,844.00 | ฿ 5,114.00 | ฿ 4,840.00 | ฿ 3,982.00 | ฿ 4,358.00 | ฿ 4,118.00 | ฿ 5,869.00 | ฿ 5,595.00 | ฿ 5,114.00 | ฿ 8,031.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 3,844.00 | ฿ 3,019.02 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 4,287.00 | ฿ 4,287.00 | ฿ 5,565.31 | ฿ 5,816.18 | ฿ 5,000.85 |
| Days to Ship | 15 Day(s) | Quote | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 15 Day(s) | 13 Day(s) | 15 Day(s) | 1 Day(s) | 15 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 15 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | Quote | Quote | Quote | Quote | 13 Day(s) | Quote | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 19 Day(s) | 15 Day(s) | Quote | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | Quote | Quote | Quote | Quote | Quote | 15 Day(s) | 5 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) |
| Applicable Tip Shape | V (35° Diamond-Shaped) | - | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | - | T (Triangle) | T (Triangle) | - | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | T (Triangle) | D (55° Diamond-Shape) | R (Circular) | V (35° Diamond-Shaped) | S (Rectangular) | R (Circular) | V (35° Diamond-Shaped) | - | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | - | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | - | R (Circular) | R (Circular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | S (Rectangular) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | R (Circular) | R (Circular) | - | - | - | W (Hexagonal Type) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | R (Circular) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) / V (35° Diamond-Shaped) | W (Hexagonal Type) | D (55° Diamond-Shape) | C (80° Diamond-Shape) / D (55° Diamond-Shape) / V (35° Diamond-Shaped) | V (35° Diamond-Shaped) / R (Circular) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | T (Triangle) | Other | Other | Other | Other | R (Circular) | R (Circular) | V (35° Diamond-Shaped) |
| Applicable Chip Clearance Angle | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv |
| Selfishly | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | No-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand |
| Application | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | - | Outer Diameter | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter | Profiling | Profiling | Profiling | Outer Diameter | Outer Diameter / End Face / Profiling | Outer Diameter | Outer Diameter | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / Chamfer | End Face | End Face | Outer Diameter | Profiling | Outer Diameter | Outer Diameter / End Face | End Face | Profiling | Post-Grinding | Profiling | Outer Diameter | Post-Grinding | Profiling | Profiling | - | Profiling | Profiling | Outer Diameter / End Face | Outer Diameter / Profiling | Profiling | Outer Diameter / Profiling | Profiling | Outer Diameter | Outer Diameter | Outer Diameter | Profiling | Profiling | Profiling | Profiling | Profiling | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Chamfer | End Face | End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter | Outer Diameter / End Face / Profiling | Outer Diameter | Outer Diameter / End Face / Profiling | End Face / Profiling | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter / End Face | Outer Diameter / End Face / Profiling | Outer Diameter | Outer Diameter / Profiling |
| Clamp Shape | Screw-on | Clamp-on | Back Surface Clamp | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | - | Screw-on | Screw-on | Screw-on | Screw-on | Clamp-on | Screw-on | Screw-on | Screw-on | Screw-on | Lever lock | - | Clamp-on / Screw-on | Screw-on | Back Surface Clamp | Screw-on | Screw-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Other | Other | Screw-on | Screw-on | Screw-on | Cable clamp | Screw-on | Screw-on | Screw-on | Screw-on | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Clamp-on | Clamp-on | - | Screw-on | Screw-on | Screw-on / Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Back Surface Clamp | Back Surface Clamp | Lever lock | Lever lock | Screw-on |
| Shank height(mm) | 10 ～ 25 | 10 ～ 16 | - | - | 10 ～ 25 | - | 10 ～ 25 | 10 ～ 16 | 16 ～ 25 | 20 ～ 32 | 16 ～ 25 | 10 ～ 25 | - | 13 ～ 23 | 12 ～ 16 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | - | 25 ～ 32 | 8 ～ 16 | - | 8 ～ 18 | - | - | 17 ～ 23 | 8 | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | 25 | 16 ～ 25 | 16 ～ 25 | 8 ～ 16 | 12 ～ 16 | 8 ～ 16 | 12 ～ 16 | 12 ～ 16 | 10 ～ 16 | 18 ～ 24 | 8 ～ 16 | 18 ～ 24 | 10 ～ 16 | 10 ～ 16 | 10 ～ 25 | 20 ～ 40 | 20 ～ 32 | 16 ～ 20 | 16 ～ 25 | 20 ～ 25 | - | 12 ～ 25 | 10 ～ 16 | 10 ～ 16 | 16 | 25 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | - | 8 ～ 16 | 10 ～ 16 | 16 ～ 25 | 16 | 20 ～ 32 | 16 | 12 ～ 16 | 16 ～ 25 | 20 ～ 25 | 16 ～ 25 | 7 ～ 12 | 8 ～ 16 | 8 ～ 16 | 14 ～ 23 | 8 ～ 16 | - | - | 8 ～ 16 | 16 | - | - | - | - | - | - | - |
| Shank width(mm) | 10 ～ 25 | 10 ～ 16 | - | - | 10 ～ 25 | - | 10 ～ 25 | 10 ～ 16 | 16 ～ 25 | 20 ～ 32 | 16 ～ 25 | 10 ～ 25 | - | 13 ～ 23 | 12 ～ 16 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | - | 25 ～ 32 | 10 ～ 16 | - | 8 ～ 16 | - | - | 17 ～ 23 | 8 | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | 25 | 16 ～ 25 | 16 ～ 25 | 8 ～ 16 | 12 ～ 16 | 8 ～ 16 | 12 ～ 16 | 12 ～ 16 | 10 ～ 16 | - | 8 ～ 16 | - | 10 ～ 16 | 10 ～ 16 | 10 ～ 25 | 20 ～ 40 | 20 ～ 32 | 16 ～ 20 | 16 ～ 25 | 20 ～ 25 | - | 12 ～ 25 | 10 ～ 16 | 10 ～ 16 | 16 | 25 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | - | 8 ～ 16 | 10 ～ 16 | 16 ～ 25 | 16 | 20 ～ 32 | 16 | 12 ～ 16 | 16 ～ 25 | 20 ～ 25 | 16 ～ 25 | 7 ～ 12 | 10 ～ 16 | 8 ～ 16 | - | 8 ～ 16 | - | - | 8 ～ 16 | 16 | - | - | - | - | - | - | - |
Loading...
Related Categories to Holding Tools for O.D. Tuning
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?