(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Holding Tools for O.D. Tuning（Applicable Tip Shape：S (Rectangular)）
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 95 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With SN○○ Inserts, Outer Diameter, End Surface and Chamfer Processing, LL Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,467.00 Days to Ship: 
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Double-Clamp Type ASKNR/L
TUNGALOY
Double clamp type tool.
[Features]
·Approach angle 75°.
·Insert used: Negative square.
·Caution: · "3D-Light" data is applied during normal customer use, such as interference checks.
·Caution: "3D-Detail" Applicable when the customer creates a tool holder diagram, etc., as 3D data.
[Applications]
·For edge cutting.From: ฿ 3,648.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
PSSN Type (External Diameter, End Face, Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standardFrom: ฿ 2,769.31 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Y-Pro Series S Type Screw-on Type SYJBR/L
TUNGALOY
Positive for Outer Diameter, Spherical Surface, and Taper CuttingFrom: ฿ 4,470.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,598.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,202.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With SN○○ Inserts, LL Tool Bit for Outer Diameter and Chamfer Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,638.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder For Outer Diameter Machining, C12/CSSN
NGK SPARK PLUG
[Features]· For SN (square) inserts· For end surface machining· Clamp-on typeFrom: ฿ 5,880.53 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBNR/L
TUNGALOY
Negative for Outer Diameter CuttingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBPR/L
TUNGALOY
Positive for Outer Diameter CuttingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDNN
TUNGALOY
Negative for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSDPN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSKNR/L
TUNGALOY
A clamp-on tool.
[Features]
·Approach angle: 75°.
·Insert used: Negative, square.
[Applications]
·For edge cutting.From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSPR/L
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ESDNR/L
TUNGALOY
Negative for Outer Diameter and Chamfering MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ESSNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Chamfering MillingFrom: ฿ 3,125.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Type H TAC Tool Bit for Outer Diameter, Retractable Pin Type HSRNR/L
TUNGALOY
Negative for Outer Diameter CuttingFrom: ฿ 16,085.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDCN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SSDPN
TUNGALOY
Positive for Outer Diameter and Chamfering MillingFrom: ฿ 3,393.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,648.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,648.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Double-Clamp Type ASSNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Chamfering MillingFrom: ฿ 3,648.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,598.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Lever Lock Type PSKNR/L
TUNGALOY
Lever lock type bite.
[Features]
·Approach angle: 75°.
·Insert used: Negative square.
[Applications]
·For edge cutting.From: ฿ 3,598.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Lever Lock Type PSSNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Chamfering MillingFrom: ฿ 3,598.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,202.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, One/Double Type DSKNR/L
TUNGALOY
A one-double type byte.
[Features]
·Approach angle: 75°.
·Insert used: Negative square.
[Applications]
·For edge cutting.From: ฿ 5,202.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, One/Double Type DSSNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Chamfering MillingFrom: ฿ 5,202.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CSSNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Chamfering MillingFrom: ฿ 7,292.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,118.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With SN○○ Inserts, LL Bit for Outer Diameter Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,638.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
SN○○ Insert Compatible Bit, for Outer Diameter Machining, Double Clamp Bit for Heavy Cutting
MITSUBISHI MATERIALS
Double clamp bit for heavy cutting SN○○ inserts for outer diameter machining.
[Features]
·A simple clamping mechanism realizes outstandingly stable machining.
·Uses a one-action double clamp mechanism.
·A new type of optimized clamp piece.
·Improved anti-vibration and chip evacuation.
·Adoption of special surface treatment.
·Clamp screw with torx holes on both ends.
[Applications]
·Machining holder for turning.From: ฿ 7,070.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With SN○○ Inserts, LL Tool Bit for End Surface Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,741.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
For outer diameter, end face, and chamfering. Double clamp bit for heavy cutting. Compatible with SN inserts.
[Features]
·A simple clamping mechanism realizes outstandingly stable machining.
·Uses a one-action double clamp mechanism.
·A new type of optimized clamp piece.
·Improved anti-vibration and chip evacuation.
·Adoption of special surface treatment.
·Clamp screw with torx holes on both ends.
[Applications]
·Machining holder for turning.From: ฿ 7,070.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder for Outer Diameter Machining SSBCR/L, SSSCR/L (Screw Clamp)
ISCAR
Various inserts can be mounted.From: ฿ 3,737.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,360.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
DSBN Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,249.60 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
PSBN Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standardFrom: ฿ 2,868.48 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
PSKN Type (End Face Machining)
KYOCERA
[Specifications]·Machining applications: flange; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 2,868.48 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
PSDN Type (External Diameter, Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 2,711.69 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSRN Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,119.35 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CS-N Type (Outer Diameter Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,401.57 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,119.35 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
KYOCERA
[Specifications]·Machining applications: flange; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,401.57 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSSN Type (Outer Diameter Machining / End Machining / Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,401.57 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSDN Type (Outer Diameter Machining / Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 3,119.35 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,753.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,753.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSDN-A Type (Outer Diameter Machining / Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 5,753.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CSSN-A Type (Outer Diameter Machining / End Machining / Chamfering)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)From: ฿ 5,753.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 20,220.98 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 21,001.04 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit T-Max P Lever Clamp PSKNR/
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 5,098.42 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit T-Max P Lever Clamp PSBNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 4,234.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 8,889.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DSDNN
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 13,481.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PSDNN
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 15,446.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 26,669.53 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, CSDPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 5,813.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Cartridge For Turning Tool, CSKPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 5,238.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max Shank Tool Bit For Turning, CSRNR/L
SANDVIK
T-Max Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 8,268.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn RC Double Clamp, DSSNR/L
SANDVIK
T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 5,607.73 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, C5-DSDNN-12-2
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, CoroTurn RC Double Clamp, DSKNR/L
SANDVIK
T-Max P series shank tool bit for highly productive outer diameter turning of large to medium-sized partsFrom: ฿ 5,919.76 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,936.02 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holesFrom: ฿ 8,449.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningFrom: ฿ 19,232.89 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningFrom: ฿ 24,589.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DSDNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,372.65 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 13,481.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 4,718.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 5,030.24 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSSNR/L -4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 13,371.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 8,889.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSDNN -4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 13,481.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 14,968.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 13,371.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Heavy Turning, Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSKNR/L
SANDVIK
T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 9,982.00 Days to Ship:
6 Day(s)
6 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MITSUBISHI MATERIALS | TUNGALOY | KYOCERA | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | NGK SPARK PLUG | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | ISCAR | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Tool Bit Applicable With SN○○ Inserts, Outer Diameter, End Surface and Chamfer Processing, LL Bit | Tool Bit Applicable With SN○○ Inserts, LL Tool Bit for Outer Diameter and Chamfer Processing | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBNR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSBPR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSKNR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSNR/L | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CSSPR/L | Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ESDNR/L | Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ESSNR/L | Type H TAC Tool Bit for Outer Diameter, Retractable Pin Type HSRNR/L | C Type with Dimples for Ceramic Insert, Double-Clamp Type CSSNR/L | Tool Bit Applicable With SN○○ Inserts, LL Bit for Outer Diameter Processing | SN○○ Insert Compatible Bit, for Outer Diameter Machining, Double Clamp Bit for Heavy Cutting | Applicable With SN○○ Inserts, LL Tool Bit for End Surface Processing | Holder for Outer Diameter Machining SSBCR/L, SSSCR/L (Screw Clamp) | CSSN Type (Outer Diameter Machining / End Machining / Chamfering) | CSSN-A Type (Outer Diameter Machining / End Machining / Chamfering) | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, C5-DSDNN-12-2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4 | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80 | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSSNR/L -4 | Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR/L | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSDNN -4 | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSKNR/L -4 | Sandvik, T-Max, Cutting Unit, Turning, RC Double Clamp, CSRNR/L -4 | Heavy Turning, Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSKNR/L | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 3,467.00 | ฿ 3,648.00 | ฿ 2,769.31 | ฿ 4,470.00 | ฿ 3,598.00 | ฿ 5,202.00 | ฿ 3,638.00 | ฿ 5,880.53 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 3,125.00 | ฿ 16,085.00 Special Price On Sale Until 30/06/2024 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 3,648.00 | ฿ 3,648.00 | ฿ 3,648.00 | ฿ 3,598.00 | ฿ 3,598.00 | ฿ 3,598.00 | ฿ 5,202.00 | ฿ 5,202.00 | ฿ 5,202.00 | ฿ 7,292.00 | ฿ 4,118.00 | ฿ 3,638.00 | ฿ 7,070.00 | ฿ 3,741.00 | ฿ 7,070.00 | ฿ 3,737.00 | ฿ 4,360.00 | ฿ 3,249.60 | ฿ 2,868.48 | ฿ 2,868.48 | ฿ 2,711.69 | ฿ 3,119.35 | ฿ 3,401.57 | ฿ 3,119.35 | ฿ 3,401.57 | ฿ 3,401.57 | ฿ 3,119.35 | ฿ 5,753.46 | ฿ 5,753.46 | ฿ 5,753.46 | ฿ 5,753.46 | ฿ 20,220.98 | ฿ 21,001.04 | ฿ 5,098.42 | ฿ 4,234.00 | ฿ 8,889.00 | ฿ 13,481.00 | ฿ 15,446.00 | ฿ 26,669.53 | ฿ 5,813.00 | ฿ 5,238.00 | ฿ 8,268.00 | ฿ 5,607.73 | ฿ 16,691.00 | ฿ 5,919.76 | ฿ 8,936.02 | ฿ 8,449.00 | ฿ 8,449.00 | ฿ 8,449.00 | ฿ 8,449.00 | ฿ 8,449.00 | ฿ 8,449.00 | ฿ 19,232.89 | ฿ 24,589.35 | ฿ 12,836.35 | ฿ 12,091.00 | ฿ 12,091.00 | ฿ 12,091.00 | ฿ 16,372.65 | ฿ 13,481.00 | ฿ 12,836.35 | ฿ 12,091.00 | ฿ 4,718.00 | ฿ 5,030.24 | ฿ 13,371.00 | ฿ 8,889.00 | ฿ 13,481.00 | ฿ 14,968.00 | ฿ 13,371.00 | ฿ 9,982.00 |
| Days to Ship | 15 Day(s) | 15 Day(s) | 5 Day(s) | 15 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 14 Day(s) | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | 11 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 40 Day(s) | 15 Day(s) | 10 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 10 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Same day | 15 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Quote | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) |
| Applicable Tip Shape | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) |
| Applicable Chip Clearance Angle | Negative | Negative | Negative | Pozidriv | Negative | Negative | Negative | - | Negative | Pozidriv | Negative | Pozidriv | Negative | Negative | Pozidriv | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | - | - | Negative | Negative | Negative | - | - | - | - | - | - | Negative | - | Negative | - | - | - | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | - | Negative | - | - | - | - |
| Selfishly | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | Right-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Left-hand | No-hand | Right-hand | Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Application | Outer Diameter / End Face / Chamfer | End Face | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / Chamfer | End Face | Outer Diameter / End Face / Chamfer | Outer Diameter / Chamfer | Outer Diameter / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer | End Face | Outer Diameter / Chamfer | End Face | End Face | Outer Diameter | End Face | End Face | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter | End Face | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter | End Face | Outer Diameter / Chamfer | Outer Diameter | Outer Diameter | End Face | End Face | Outer Diameter / End Face / Chamfer | Outer Diameter / Chamfer | End Face | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | End Face | Outer Diameter | Outer Diameter / End Face / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter | Outer Diameter / Post-Grinding | End Face | Outer Diameter | Outer Diameter / End Face / Chamfer | Outer Diameter / Post-Grinding | End Face | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face | Outer Diameter / Post-Grinding | Outer Diameter / End Face | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | End Face | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Post-Grinding | End Face | Outer Diameter | Outer Diameter / End Face / Chamfer |
| Clamp Shape | Lever lock | Cable clamp | Lever lock | Screw-on | Lever lock | Cable clamp | Lever lock | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Other | Other | Other | Screw-on | Screw-on | Cable clamp | Cable clamp | Cable clamp | Lever lock | Lever lock | Lever lock | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Screw-on | Lever lock | Wedge Lock | Lever lock | Wedge Lock | Screw-on | Lever lock | Cable clamp | Lever lock | Lever lock | Lever lock | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Lever lock | Lever lock | Lever lock | Lever lock | - | - | - | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Pin Lock | Pin Lock | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Cable clamp | Cable clamp | Clamp-on / Cable clamp | Double Clamp | Clamp-on | Clamp-on | Clamp-on | Cable clamp |
| Shank height(mm) | 16 ～ 32 | 20 ～ 25 | 16 ～ 25 | - | 16 ～ 32 | 20 ～ 25 | 12 ～ 25 | - | 20 ～ 25 | 16 ～ 25 | 20 ～ 25 | 16 ～ 25 | 25 | 20 ～ 25 | 16 ～ 25 | 12 ～ 16 | 16 ～ 20 | 40 ～ 50 | 10 ～ 16 | 10 ～ 16 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 16 ～ 25 | 16 ～ 32 | 16 ～ 32 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 12 ～ 16 | 12 ～ 32 | 32 ～ 40 | 16 ～ 25 | 32 ～ 40 | 12 ～ 20 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 ～ 32 | 16 | 40 | - | - | - | - | 12 | 32 | 32 ～ 40 | - | 32 | - | - | - | 32 | - | 32 | 32 | - | - | - | - | - | - | - | - | - | - | 20 ～ 50 | 16 ～ 40 | - | 40 | - | - | - | 40 ～ 50 |
| Shank width(mm) | 16 ～ 32 | 20 ～ 25 | 16 ～ 25 | - | 16 ～ 32 | 20 ～ 25 | 12 ～ 32 | - | 20 ～ 25 | 16 ～ 25 | 20 ～ 25 | 16 ～ 25 | 25 | 20 ～ 25 | 16 ～ 25 | 12 ～ 16 | 16 ～ 20 | 40 ～ 50 | 10 ～ 16 | 10 ～ 16 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 16 ～ 25 | 16 ～ 32 | 16 ～ 32 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 12 ～ 16 | 12 ～ 32 | 32 ～ 40 | 16 ～ 25 | 32 ～ 40 | 12 ～ 20 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 ～ 32 | 16 | 40 | - | - | - | 25 | 12 | 25 ～ 32 | 25 ～ 40 | - | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | - | - | - | - | - | - | - | - | - | - | 20 ～ 50 | 16 ～ 40 | - | 40 | - | - | - | 40 ～ 50 |
Loading...
Related Categories to Holding Tools for O.D. Tuning
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?