(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 1/7/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Holding Tools for O.D. Tuning（Application：Profiling）
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 208 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,800.00 Days to Ship: 
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVJNR/L
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 6,777.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standardFrom: ฿ 3,056.63 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
KYOCERA
[Features]
·This is SDJC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and profilingFrom: ฿ 2,175.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,500.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVVB Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,554.89 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder for Outer Diameter Machining PDJNR/L
TUNGALOY
[Features]
· Lever Clamp Type
· Approach Angle: 93°
· Turning Insert Diamond 55°, Negative Type Insert UsedFrom: ฿ 3,598.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,202.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, One Double Type DDQNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Profiling MillingFrom: ฿ 5,202.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
TLHR TL Tool Bit, for Outer Diameter Machining and Profiling
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); clamp method: non-ISO standardFrom: ฿ 3,373.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With XC Inserts, Profile Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
Double clamp type profiling tool.
[Features]
· Tool consolidation is made possible and cycle time is shortened.
· Adopts highly reliable double clamp.
· Achieves good chip disposal performance with a breaker shape suitable for profiling.
· Screw-on type.
· Uses a 25° two-bolt insert.
· Pulling up of max. 60° is possible.
[Application]
· For profiling.
· 300° spherical surface processing is possible.From: ฿ 7,550.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
PDJN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standardFrom: ฿ 2,769.31 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
WTJN-N Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standardFrom: ฿ 3,093.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
DVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,025.27 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 2,805.76 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S...SDUC Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 7,786.68 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVQNR/L
TUNGALOY
A multi-clamp tool.
[Features]
·Approach angle: 117.5°.
·Insert used: Negative 35° and 25°, rhombic.
[Applications]
·For copy cutting.From: ฿ 5,202.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L
TUNGALOY
Screw-on outer diameter, profiling tools.
[Features]
·Approach angle: 117.5°.
·Uses a positive type insert.
[Applications]
·For copy cutting.From: ฿ 5,606.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,648.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Double-Clamp Type AVQNR/L
TUNGALOY
Double clamp type tool.
[Features]
·Approach angle: 117.5°.
·Insert used: Negative 35° and 25°, rhombic.
[Applications]
·For copy cutting.From: ฿ 4,800.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With DN Inserts , Double-Clamp Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
Simple clamp mechanism for processing of excellent stability.
[Features]
· Single action double clamp mechanism is adopted.
· New and optimized clamp piece.
· Improved vibration-resistance damping and cutting chip discharge.
· Adoption of special surface treatment.
· Clamp screw with Torx hole on both ends.
· New double clamp type.
· Insert is securely clamped.
· Excellent blade-tip position accuracy.
· Economic negative insert.
· A series of small inserts is also available.
[Application]
· Machining holder for cutting.From: ฿ 3,741.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With DN○○Inserts, LL Tool Bit for End Surface and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,982.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)From: ฿ 4,461.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
DVVN Type (External Diameter/Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,025.27 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)From: ฿ 4,593.19 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 3,056.63 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVJB Type (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 3,025.27 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S...SVUB (C) Type (Outer Diameter and Undercutting Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 5° (B); clamp method: screw-on (S)From: ฿ 9,280.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 9,560.07 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DVPNR/LFrom: ฿ 7,063.86 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/LFrom: ฿ 7,251.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 19,317.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CKJNR/L
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETXNR/L
TUNGALOY
Eccentric pin type tool for outer diameter machining.
[Features]
·Approach angle: Uses 100° negative inserts.
· It uses an economical negative type insert.
·The insert can be fixed by rotating the eccentric pin, making it easy to operate.From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
J-Series, Type JT / Outer Diameter Cutting, Screw-On Type JSDJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type JT / Outer Diameter Cutting, Rear Clamp Type JTTANR/L
TUNGALOY
Negative for Outer Diameter Cutting, No OffsetFrom: ฿ 4,470.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDN3CR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,326.46 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-SDUCL
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 7,366.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,393.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L
TUNGALOY
Positive for Outer Diameter and End Face Cutting, No OffsetFrom: ฿ 3,393.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Screw On Type MVVNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 6,777.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDJNR/L
TUNGALOY
A multi-clamp method that combines the lock pin method and the clamp-on method.From: ฿ 5,458.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDPNN
TUNGALOY
Negative for Outer Diameter Profiling MillingFrom: ฿ 5,458.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTJNR/L
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 5,458.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTQNR/L
TUNGALOY
A multi-clamp tool.
[Features]
·Approach angle: 105°.
·Insert used: Negative, equilateral triangle.
[Applications]
·For copy cutting.From: ฿ 5,202.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 6,045.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRGCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 9,196.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDNCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDQCR/L
TUNGALOY
A screw-on tool.
[Features]
·Approach angle: 107.5°.
·Insert used: Positive 55°, rhombic.
[Applications]
·For copy cutting.From: ฿ 4,470.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRACR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,648.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRGCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,847.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L
TUNGALOY
A screw-on tool.
[Features]
·Approach angle: 107.5°.
·Insert used: Positive 35°, rhombic.
[Applications]
·For copy cutting.From: ฿ 6,521.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,129.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVVCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,606.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,327.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
W Type TAC Bit for Outer Diameter, Wedge-on Type WTJNR/L
TUNGALOY
A wedge-on type that can withstand large fluctuations in cutting force due to changes in the depth of cut in profiling cutting as well as plunge and retraction.From: ฿ 4,498.78 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,482.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Double-Clamp Type ADQNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Profiling MillingFrom: ฿ 3,648.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,031.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,648.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Double-Clamp Type ATQNR/L
TUNGALOY
Double clamp type outer diameter holder.
[Features]
·Tool Approach Angle for Copy Machining: 105°.
·The insert negative used is an equilateral triangle.
·You can choose from 4 variations, left-handed (L) and right-handed (R).
·Bits that can be used with inserts (TN**1604**).
·Recommended tightening torque: 3.0 N⋅m
[Applications]
·Can be used as a copying tool.From: ฿ 3,318.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,800.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 7,841.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Lever Lock Type PDQNR/L
TUNGALOY
Negative for Outer Diameter, End Face, and Profiling MillingFrom: ฿ 7,841.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 9,196.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 5,458.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CDJNR/L
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 7,292.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CDNNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 7,292.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 7,292.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With DC○○Inserts, SP Tool Bit for Outer Diameter and Profile Processing, SDJC
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)From: ฿ 5,114.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With DN○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,982.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
RC○○ Insert Compatible Bit for External Diameter, End Face and Profiling SP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,840.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With RC○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)From: ฿ 3,982.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 4,358.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts, SP Tool Bit for End Surface and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 5,595.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 15° (D); clamp method: screw-on (S)From: ฿ 5,114.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VN○○ Inserts, MP Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 5,251.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With VN Inserts, Double-Clamp Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
The double-clamp tool bite achieving outstanding machining with a simple clamping mechanism.
[Features]
· Single action double clamp mechanism is adopted.
· New and optimized clamp piece.
· Improved vibration-resistance and chip discharge.
· Adopts special surface treatment.
· Clamp screw with Torx hole on both ends.
· New double clamp type.
· Insert is securely clamped.
· Excellent blade-tip position accuracy.
· Economic negative insert.
· A series of small inserts is also available.
[Application]
· Used for machining holder for turning.From: ฿ 5,251.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
VN○○ Insert Compatible Bit, for End Surface and Profile Machining, MP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 5,251.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With VN Inserts, Double-Clamp Tool Bit for End Surface and Profile Processing
MITSUBISHI MATERIALS
VN○○ insert compatible Double-clamp tool bit for end surface and profile processing.
[Features]
· Achieves outstanding stable machining with a simple clamping mechanism.
· Single action double clamp mechanism is adopted.
· New and optimized clamp piece.
· Improved vibration-resistance and chip discharge.
· Adoption of special surface treatment.
· Clamp screw with Torx hole on both ends.
· New double clamp type.
· Insert is securely clamped.
· Excellent blade-tip position accuracy.
· Economic negative insert.
· A series of small inserts is also available.
[Application]
· Machining holder for cutting.From: ฿ 5,251.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Features]
· For external shape machining.
· Can be mounted on an automatic cam-driven lathe.
· 7 mm to 12 mm small shank.
· A single holder enables front turning, back turning, groove machining, thread machining and part-off machining.
· Ideal for machining parts with a small diameter of ø5 mm or less.From: ฿ 8,031.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Pre-Grinding, Profiling, End Face Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt), R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S), pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
PDJN/PDNN for Combined Machining, for Outer Diameter / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | TUNGALOY | MITSUBISHI MATERIALS | TUNGALOY | KYOCERA | KYOCERA | KYOCERA | KYOCERA | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS |
| Product Series | Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVJNR/L | ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling) | SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder | SVPB Type (outer diameter, end surface, profile, relief machining) | TLHR TL Tool Bit, for Outer Diameter Machining and Profiling | Applicable With XC Inserts, Profile Tool Bit for Outer Diameter and Profile Processing | SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining) | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVQNR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDJCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L | Applicable With DN Inserts , Double-Clamp Tool Bit for Outer Diameter and Profile Processing | Tool Bit Applicable With DN○○Inserts, LL Tool Bit for End Surface and Profile Processing | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | S...SVUB (C) Type (Outer Diameter and Undercutting Machining) | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L | Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID | Type C TAC Tool Bit for Outer Diameter, Clamp-on Type CKJNR/L | Type E TAC Tool Bit for Outer Diameter, Eccentric Pin Type ETXNR/L | J-Series, Type JT / Outer Diameter Cutting, Screw-On Type JSDJCR/L | J-Series, Type JT / Outer Diameter Cutting, Rear Clamp Type JTTANR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSDN3CR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JS-SDUCL | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDJNR/L | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MDPNN | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTJNR/L | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTQNR/L | P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRDCN | P Type TAC Tool Bit for Outer Diameter, Lever Lock Type PRGCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SDQCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRACR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRGCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L | T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRACN | T-Type TAC Tool Bit for Outer Diameter, Taper Lock Type TRDCN | C Type with Dimples for Ceramic Insert, Double-Clamp Type CDJNR/L | C Type with Dimples for Ceramic Insert, Double-Clamp Type CDNNN | C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN | Tool Bit Applicable With DC○○Inserts, SP Tool Bit for Outer Diameter and Profile Processing, SDJC | Tool Bit Applicable With DN○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing | RC○○ Insert Compatible Bit for External Diameter, End Face and Profiling SP Bit | Tool Bit Applicable With RC○○ Inserts, LL Tool Bit for Outer Diameter and Profile Processing | RC○○ Insert Compatible Bit for External Diameter and Profiling SP Bit | Tool Bit Applicable With VC○○ Inserts, SP Tool Bit for End Surface and Profile Processing | VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit | Tool Bit Applicable With VN○○ Inserts, MP Tool Bit for Outer Diameter and Profile Processing | Applicable With VN Inserts, Double-Clamp Tool Bit for Outer Diameter and Profile Processing | VN○○ Insert Compatible Bit, for End Surface and Profile Machining, MP Bit | Applicable With VN Inserts, Double-Clamp Tool Bit for End Surface and Profile Processing | PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining | PDJN/PDNN for Combined Machining, for Outer Diameter / Profile Machining | ||||||||||||||||||||||||||||||||||||
| From | ฿ 4,800.00 | ฿ 3,844.00 | ฿ 6,777.00 | ฿ 3,056.63 | ฿ 2,175.00 | ฿ 2,500.00 | ฿ 2,554.89 | ฿ 3,598.00 | ฿ 5,202.00 | ฿ 5,202.00 | ฿ 3,373.00 | ฿ 7,550.00 | ฿ 2,769.31 | ฿ 3,093.00 | ฿ 3,025.27 | ฿ 2,805.76 | ฿ 7,786.68 | ฿ 12,836.35 | ฿ 5,202.00 | ฿ 4,470.00 | ฿ 4,470.00 | ฿ 5,606.00 | ฿ 3,648.00 | ฿ 4,800.00 | ฿ 3,741.00 | ฿ 3,982.00 | ฿ 4,461.00 | ฿ 3,025.27 | ฿ 4,593.19 | ฿ 3,056.63 | ฿ 3,025.27 | ฿ 9,280.00 | ฿ 9,560.07 | ฿ 7,063.86 | ฿ 7,251.00 | ฿ 19,317.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 3,393.00 | ฿ 4,470.00 | ฿ 3,326.46 | ฿ 7,366.00 | ฿ 3,393.00 | ฿ 3,393.00 | ฿ 6,777.00 | ฿ 5,458.00 | ฿ 5,458.00 | ฿ 5,458.00 | ฿ 5,202.00 | ฿ 6,045.00 Special Price On Sale Until 30/06/2024 | ฿ 9,196.00 | ฿ 4,470.00 | ฿ 4,470.00 | ฿ 3,648.00 | ฿ 3,847.00 | ฿ 6,521.00 | ฿ 5,129.00 | ฿ 5,606.00 | ฿ 3,327.00 | ฿ 999,999,999.00 | ฿ 4,498.78 | ฿ 3,482.00 | ฿ 3,648.00 | ฿ 4,031.00 | ฿ 3,648.00 | ฿ 3,318.00 | ฿ 4,800.00 | ฿ 7,841.00 | ฿ 7,841.00 | ฿ 9,196.00 | ฿ 5,458.00 | ฿ 7,292.00 | ฿ 7,292.00 | ฿ 7,292.00 | ฿ 3,844.00 | ฿ 5,114.00 | ฿ 3,982.00 | ฿ 4,840.00 | ฿ 3,982.00 | ฿ 4,358.00 | ฿ 5,595.00 | ฿ 5,114.00 | ฿ 5,251.00 | ฿ 5,251.00 | ฿ 5,251.00 | ฿ 5,251.00 | ฿ 8,031.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 |
| Days to Ship | 15 Day(s) | 15 Day(s) | 19 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 1 Day(s) | 15 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 19 Day(s) | 15 Day(s) | 19 Day(s) | 15 Day(s) | 10 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | Quote | Quote | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 19 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 19 Day(s) | 15 Day(s) | 19 Day(s) | 15 Day(s) | Quote | 40 Day(s) | 40 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 40 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 40 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 40 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | Quote | Quote |
| Applicable Tip Shape | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | - | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | R (Circular) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | R (Circular) | - | T (Triangle) | D (55° Diamond-Shape) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | R (Circular) | R (Circular) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | R (Circular) | R (Circular) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | R (Circular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) / R (Circular) | D (55° Diamond-Shape) |
| Applicable Chip Clearance Angle | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | - | - | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative |
| Selfishly | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand | No-hand | Right-hand | Right-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand / No-hand |
| Application | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling |
| Clamp Shape | Cable clamp | Screw-on | Other | Back Surface Clamp | Screw-on | Screw-on | Screw-on | Lever lock | Cable clamp | Cable clamp | - | Screw-on | Lever lock | Wedge Lock | Cable clamp | Screw-on | Screw-on | Pin Lock | Other | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Cable clamp | Lever lock | Lever lock | Cable clamp | Double Clamp | Back Surface Clamp | Screw-on | Screw-on | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Other | Screw-on | Other | Screw-on | Screw-on | Screw-on | Screw-on | Other | Other | Other | Other | Other | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Other | Other | Wedge Lock | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Lever lock | Lever lock | Lever lock | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Screw-on | Screw-on | Lever lock | Screw-on | Lever lock | Screw-on | Screw-on | Screw-on | Lever lock | Cable clamp | Lever lock | Cable clamp | Clamp-on | Screw-on | Screw-on / Lever lock | Lever lock |
| Shank height(mm) | 20 ～ 25 | 10 ～ 25 | 20 ～ 32 | - | - | 10 ～ 25 | - | 16 ～ 32 | 20 ～ 32 | 20 ～ 32 | 20 ～ 32 | 16 ～ 25 | 16 ～ 25 | - | - | - | 13 ～ 23 | - | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 32 | 20 ～ 25 | 16 ～ 25 | 20 ～ 25 | 25 ～ 32 | - | - | - | - | 17 ～ 23 | 32 ～ 40 | 32 ～ 40 | 12 | 50 | 25 | 16 ～ 20 | 8 ～ 16 | 12 ～ 16 | 12 ～ 16 | 18 ～ 24 | 10 ～ 16 | 10 ～ 16 | 20 ～ 32 | 25 | 25 | 25 | 20 ～ 25 | 20 ～ 40 | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | - | 12 ～ 25 | 25 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 25 | 20 ～ 25 | 25 | 25 ～ 32 | 25 | 25 | 10 ～ 16 | 16 ～ 25 | 20 ～ 25 | 16 | 20 ～ 32 | 16 | 20 ～ 25 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 7 ～ 12 | 14 ～ 23 | - | - |
| Shank width(mm) | 20 ～ 25 | 10 ～ 25 | 20 ～ 32 | - | - | 10 ～ 25 | - | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 32 | 16 ～ 25 | 16 ～ 32 | - | - | - | 13 ～ 23 | - | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 16 ～ 32 | 20 ～ 32 | 25 ～ 32 | - | - | - | - | 17 ～ 23 | 32 ～ 40 | 25 ～ 40 | 12 | 40 | 25 | 16 ～ 20 | 8 ～ 16 | 16 | 12 ～ 16 | - | 10 ～ 16 | 10 ～ 16 | 20 ～ 25 | 25 | 25 | 25 | 20 ～ 25 | 20 ～ 40 | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | - | 12 ～ 25 | 25 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 25 | 20 ～ 25 | 25 | 25 | 25 | 25 | 10 ～ 16 | 16 ～ 25 | 20 ～ 32 | 16 | 20 ～ 32 | 16 | 20 ～ 25 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 7 ～ 12 | - | - | - |
Loading...
Related Categories to Holding Tools for O.D. Tuning
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?