(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
M Class Insert (with MA Breaker) WNMG○○○○○○-MA
MITSUBISHI MATERIALS
Interpolation M-class insert for finishing and light cutting of cast iron (with MA breaker) WNMG○○○○○○-MA.
[Features]
・M-class double-sided chip breaker
・Ideal for general-purpose areas
・Positive land blade shape for excellent sharpness
・80° hexagon, negative insert, with hole
・UE6105・MC6115 is steel, US7020 is stainless steel, MC5005・UC5105 is for stable cutting of cast iron (reference for cutting condition)
・UE6110, MC6015, MP3025 is for general cutting of steel (reference for cutting condition)
・MC7025 is for general cutting of stainless steel (reference for cutting condition)
・UC5115 is for general cutting of cast iron ( Approximate state of cutting)
[Use]
・For lathe machining of cast iron, finishing and light cutting
From: ฿ 198.00 |
---|
Days to Ship: |
For Turning, Hexagon Type (80°) Positive Type Insert WBGT Type
TUNGALOY
From: ฿ 500.00 |
---|
Days to Ship: |
M Class Insert (with MM Breaker) WNMG○○○○○○-MM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: |
M Class Insert (with LP Breaker) WNMG-LP
MITSUBISHI MATERIALS
First recommended breaker WNMG-LP for light cutting of carbon steel and alloy steel.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Achieves stable chip disposal in the light cutting area
・Smooth chip discharge is possible with the curved cutting edge
・For steel, UE6105 and MC6115 are for stable cutting (cutting condition guideline), UE6110, MC6015 and MP3025 are for general cutting (cutting condition guideline)
[Use]
・For turning carbon steel and alloy steel, light cutting
From: ฿ 251.25 |
---|
Days to Ship: |
M Class Insert (with MP Breaker) WNMG○○○-MP
MITSUBISHI MATERIALS
M-class insert that achieves good chip control, low cutting heat, and high wear resistance in a wide range of areas due to its original chipbreaker shape.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・Chip disposal follows fluctuations in depth of cut, feed, and cutting speed・
Greatly improves productivity
・Reduces crater wear due to low cutting heat . The temperature of the work material is also reduced
・Stable cutting of steel for UE6105・MC6115 (guideline for cutting condition)
・General cutting for MP3025・UE6110・MC6015 steel and cast iron for UC5115 (guideline for cutting condition)
[Use]
・For medium turning
・Ideal for turning
and profiling where cutting conditions such as depth of cut, feed, and cutting speed fluctuate greatly.
From: ฿ 310.00 |
---|
Days to Ship: |
80° Hexagon Insert with Hole Negative WNMG0604○○ "Medium Cutting"
TUNGALOY
From: ฿ 284.43 |
---|
Days to Ship: |
80° Hexagon Insert with Hole Negative WNMG "Medium Cutting"
TUNGALOY
From: ฿ 287.45 |
---|
Days to Ship: |
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
From: ฿ 373.90 |
---|
Days to Ship: |
T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)
SANDVIK
From: ฿ 406.00 |
---|
Days to Ship: |
From: ฿ 455.24 |
---|
Days to Ship: |
W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting"
MISUMI
From: ฿ 356.00 |
---|
Days to Ship: |
M Class Insert (with GH Breaker) WNMG○○○○○○-GH
MITSUBISHI MATERIALS
First recommended chipbreaker for rough cutting of cast iron WNMG○○○○○○-GH.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Suitable for interrupted cutting and black scale cutting・
High feed possible due to combination of wide land and large chip pocket
・UE6105, MC6115 is steel, US7020 is stainless steel, and UC5105 is cast iron for stable cutting (guidelines for cutting conditions)
[Use]
・For turning and rough cutting of cast iron
From: ฿ 310.00 |
---|
Days to Ship: |
M Class Insert (with GM Breaker) WNMG○○○○○○-GM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: |
M Class Insert (with RP Breaker) WNMG○○○-RP
MITSUBISHI MATERIALS
M-class insert for rough cutting of carbon steel and alloy steel (with RP breaker) WNMG○○○-RP.
[Features]
・80° equilateral and unequal hexagon, negative insert, with hole
・M-class double-sided chip breaker
・suitable for interrupted cutting and black
scale cutting・achieves a tough cutting edge and low cutting resistance due to the optimum rake angle
・For steel, UE6105 and MC6115 are for stable cutting, while UE6110 and MC6015 are for general cutting (a guideline for cutting conditions)
[Use] - For
turning and rough cutting of carbon steel and alloy steel
From: ฿ 310.00 |
---|
Days to Ship: |
M Class Insert (No Breaker) WNMA○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) WNMA○○○○○○.
[Features]
・Flat top
・High cutting edge strength and stable seating
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
Turning Insert Diamond Negative
KYOCERA
From: ฿ 1,331.86 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-CM "Medium Cutting"
TUNGALOY
From: ฿ 320.71 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-SS "Finishing to Cutting"
TUNGALOY
From: ฿ 320.71 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○WP "Finishing" with Wiper Cutting Edge
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○PS "Medium to Rough"
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG "Rough Cutting"
KYOCERA
From: ฿ 232.79 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG "Medium to Rough" Aluminum Non Ferrous
KYOCERA
From: ฿ 577.74 |
---|
Days to Ship: |
Hexagonal Type, with Hole, 80°, Positive 11°
TUNGALOY
From: ฿ 563.80 |
---|
Days to Ship: |
Blade Tip Replacement Tip W (Hexagonal) WDMT-ZDTR
SUMITOMO ELECTRIC HARDMETAL
From: ฿ 282.42 |
---|
Days to Ship: |
Replacement Blade Insert W (Hexagonal) WNMG【10 Pieces Per Package】
SUMITOMO ELECTRIC HARDMETAL
From: ฿ 3,350.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) NP-WNGA○○○○○3/6
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) NP-WNGA○○○○○WS3
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with C Breaker) WNMG○○○○○○-C
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with FH Breaker) WNMG○○○-FH
MITSUBISHI MATERIALS
M-class insert for finish cutting of carbon steel, alloy steel, and stainless steel (with FH breaker) WNMG○○○-FH.
[Features]
- M-class double-sided chip breaker.
・Achieves stable chip control with low depth of cut and low feed.
· 80° hexagon, negative insert, with hole.
· UE6110 and MP3025 are for general cutting of steel (reference for cutting conditions).
· NX2525 and AP25N provide stable cutting of steel, stainless steel, and cast iron (reference for cutting conditions).
[Use]
・Finishing for turning carbon steel, alloy steel, and stainless steel.
From: ฿ 290.55 |
---|
Days to Ship: |
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with FY Breaker) WNMG○○○-FY
MITSUBISHI MATERIALS
Geometry for low carbon steel finishing with FY geometry.
[Features]
- 80° equilateral scalene hexagon, negative insert, with hole.
・Stable chip curl created by steep walls.
・Excellent chip control is achieved with iron plate materials and low-carbon steel materials.
[Applications]
・Ideal for finish turning for low carbon steel.
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with GJ Breaker) WNMG○○○○○○-GJ
MITSUBISHI MATERIALS
From: ฿ 280.88 |
---|
Days to Ship: |
M Class Insert (with LM Breaker) WNMG○○○-LM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: |
M Class Insert (with MH Breaker) WNMG○○○-MH
MITSUBISHI MATERIALS
Alternative chipbreaker for medium cutting of alloy steel.
[Features]
- 80° equilateral unequal hexagonal shape, negative insert, with hole-
M-class double-sided chip breaker- flat land blade type for high cutting edge strength-
moderate chip pocket for good chip
control- UE6105 and MC6115 are Stable cutting of steel (guideline for cutting conditions)
・US7020 is for stable cutting of stainless steel (guideline for cutting conditions)
[Applications]
・For turning and medium cutting of alloy steel
From: ฿ 310.00 |
---|
Days to Ship: |
M Class Insert (with MJ Breaker) WNMG○○○○○○-MJ
MITSUBISHI MATERIALS
From: ฿ 310.51 |
---|
Days to Ship: |
M-Class Insert (With MS Breaker) WNMG○○○○○○-MS
MITSUBISHI MATERIALS
From: ฿ 283.00 |
---|
Days to Ship: |
M Class Insert (with MW Breaker) WNMG○○○-MW
MITSUBISHI MATERIALS
Negative insert with wiper for medium cutting of carbon steel, alloy steel, mild steel, and stainless steel.
[Features]
・WNMG○○○○○○-MW
・80° equilateral unequal angle hexagon, with holes
・Rough cutting and finishing in one shot with a high-efficiency insert that can maintain surface roughness even when the feed is increased.
・A wiper blade is installed at the connecting part of the corner radius and the straight blade
・Wide chip pocket prevents chip clogging・MC5005
/UC5105 cast iron, MC6115/UE6105 steel for stable cutting (guideline for cutting conditions)
・MC6015 / UE6110 is steel, and MC5015 / UC5115 is cast iron for general cutting (guidelines for cutting conditions)
[Application]
- For medium cutting
From: ฿ 310.00 |
---|
Days to Ship: |
M Class Insert (with RM Breaker) WNMG○○○○○○-RM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: |
M Class Insert (with SA Breaker) WNMG○○○-SA
MITSUBISHI MATERIALS
M grade insert (with SA breaker) WNMG○○○○○○-SA.
[Features]
・80° equilateral unequal hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Excellent chip control on the low feed side within the light cutting area・
Mimicking and pulling processing with wave cutting edge
・Recommended for work material hardness 200-300HB・
NX2525 for stable cutting of steel, stainless steel and cast iron (guideline for cutting conditions)
・MC6115・UE6105 for stable cutting of steel (guideline for cutting conditions)
・NX3035・UE6110・MC6015 is for general cutting of steel (a guideline for cutting conditions)
[Applications]
- For turning carbon steel and alloy steel, light cutting
From: ฿ 310.00 |
---|
Days to Ship: |
M Class Insert (with SH Breaker) WNMG○○○-SH
MITSUBISHI MATERIALS
M grade insert (with SH breaker) WNMG-SH.
[Features]
・80° equilateral unequal hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Low depth of cut in the light cutting area・Ideal for high feed areas
・Smooth chip discharge is possible with the curved cutting edge
・Recommended for work material hardness 160-250HB
・NX2525 for stable cutting of steel, stainless steel and cast iron (guideline for cutting conditions)
・MC6115 and UE6105 for stable cutting of steel ( guideline for cutting conditions) ・UE6110 and
MC6015 for steel General cutting (guideline for cutting condition)
・General cutting with UC5115 cast iron (guideline for cutting condition)
[Application]
・For turning carbon steel and alloy steel, light cutting
From: ฿ 280.88 |
---|
Days to Ship: |
M Class Insert (with SW Breaker) WNMG○○○-SW
MITSUBISHI MATERIALS
Insert with wiper for light cutting of carbon steel, alloy steel, mild steel, and stainless steel WNMG○○○○○○-SW.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・High efficiency insert that maintains surface roughness even when feed is increased, making it possible to perform roughing and finishing in one shot
・Inner diameter processing Improved sharpness with positive land suitable for cutting. Prevents chattering・Prevents
chip clogging with a wide chip pocket
・Stable cutting of steel, stainless steel, and cast iron with
NX2525 (guidelines for cutting conditions) Condition guideline)
・MC5015 is cast iron, MP3025・NX3035・MC6015・UE6110 is steel for general cutting (cutting condition guideline)
[Usage]
・For light cutting
From: ฿ 280.88 |
---|
Days to Ship: |
M Class Insert (with SY Breaker) WNMG○○○○○○-SY
MITSUBISHI MATERIALS
M grade insert with SY breaker for medium finishing of low carbon steel.
[Features]
- 80° equilateral scalene hexagon, negative insert, with hole.
・Excellent chip control is achieved with iron plate materials and low-carbon steel materials.
- Reliable curling even in profiling machining due to the use of a wave-shaped cutting edge.
・Reliable curl is achieved by combining peninsula dots and a rake face with a large pocket.
[Applications]
・Ideal for semi-finish turning for low carbon steel.
From: ฿ 280.88 |
---|
Days to Ship: |
M Class Insert (without Breaker ) WNMG○○○○○○
MITSUBISHI MATERIALS
First recommendation for medium cutting of cast iron, alternate chipbreaker for medium cutting of carbon steel and alloy steel.
[Features]
・M-class double-sided chip breaker
・High cutting edge strength with a flat land blade type
・Highly versatile all-around breaker shape
・NX2525 for stable cutting of steel, stainless steel, and cast iron (a guideline for cutting conditions)
・UC5105 Stable cutting of cast iron (guideline for cutting conditions)
・UE6105, MC6115 for stable cutting of steel (guideline for cutting conditions)
・MC6015, MP3025, UE6110 for general cutting of steel (guideline for cutting conditions)
・UC5115 for general cutting of cast iron ( Approximate state of cutting)
[Applications]
- For turning cast iron, medium cutting of carbon steel and alloy steel
From: ฿ 280.88 |
---|
Days to Ship: |
BIG DAISHOWA SEIKI
From: ฿ 508.38 |
---|
Days to Ship: |
BIG DAISHOWA SEIKI
From: ฿ 474.24 |
---|
Days to Ship: |
BIG DAISHOWA SEIKI
From: ฿ 559.64 |
---|
Days to Ship: |
From: ฿ 210.60 |
---|
Days to Ship: |
From: ฿ 281.96 |
---|
Days to Ship: |
From: ฿ 191.91 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative Multicorner
TUNGALOY
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
From: ฿ 1,269.14 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNGG○○-01 "Precision Finishing to Cutting"
TUNGALOY
From: ฿ 546.87 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMA "Finishing to Medium Cutting"
TUNGALOY
From: ฿ 377.56 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG○○-ZF "Finishing to Cutting"
TUNGALOY
From: ฿ 301.07 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0604○○-AFW "Finishing to Cutting"
TUNGALOY
From: ฿ 241.21 |
---|
Days to Ship: |
Hexagon insert with Hole, 80°, Negative WNMG0804○○
TUNGALOY
From: ฿ 301.07 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-33 "Medium Cutting"
TUNGALOY
From: ฿ 287.45 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-37 "Medium Cutting"
TUNGALOY
From: ฿ 320.71 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-CF "Finishing to Cutting"
TUNGALOY
From: ฿ 320.71 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-CH "Medium Cutting"
TUNGALOY
From: ฿ 320.71 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-HMM "Medium Cutting"
TUNGALOY
From: ฿ 320.71 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-NS "Finishing to Cutting"
TUNGALOY
From: ฿ 301.07 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG-SA "Medium Cutting"
TUNGALOY
From: ฿ 287.45 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG-SM "Medium Cutting"
TUNGALOY
From: ฿ 334.33 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WNMG0804○○-TS "Finishing to Cutting"
TUNGALOY
From: ฿ 289.00 |
---|
Days to Ship: |
Hexagonal Type, with Hole, 80°, Negative WXGU0403○○
TUNGALOY
From: ฿ 540.54 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WXGU0403○○R/L-TS "Finishing to Cutting"
TUNGALOY
From: ฿ 540.54 |
---|
Days to Ship: |
80° Hexagon Type with Hole Negative WXGU0403R/L○○-SS "Low Resistance Type Finishing"
TUNGALOY
From: ฿ 540.54 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○WQ "Finishing to Medium" with Wiper Cutting Edge
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○PP "Finishing"
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○GP "Finishing"
KYOCERA
From: ฿ 165.56 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○PQ "Finishing to Medium"
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○HQ "Finishing to Medium"
KYOCERA
From: ฿ 165.56 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMGCQ "Finishing to Medium Lifting"
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○CJ "Finishing to Medium Lifting"
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough"
KYOCERA
From: ฿ 165.56 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○PT "Medium to Rough High Feed"
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○GT "Medium to Rough High Feed"
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○XP "Finishing" Mild Steel
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○XQ "Medium Cutting" Mild Steel
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○XS "Rough Cutting" Mild Steel
KYOCERA
From: ฿ 254.76 |
---|
Days to Ship: |
KYOCERA
From: ฿ 458.59 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○TK "Medium to Rough" Stainless Steel Heat-resistant Alloy
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-resistant Alloy
KYOCERA
From: ฿ 203.00 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○MU "Medium to Rough" Stainless Steel Heat-resistant Alloy
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○C "Rough Cutting" Cast Iron
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○ZS "Rough Cutting" Cast Iron
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMG○○GC "Rough Cutting" Cast Iron
KYOCERA
From: ฿ 242.44 |
---|
Days to Ship: |
80° Hexagon Type Negative with Hole WNMA○○ Without Breaker "Cast Iron"
KYOCERA
From: ฿ 254.51 |
---|
Days to Ship: |
Brand |
---|
Product Series |
From |
Days to Ship |
Shape |
work material |
Application |
Available corners |
Breaker Use |
Rake angle |
Nose R |
Selfishly |
Groove Width (For Grooving / Plunging) |
Pitch (for Threading) |
O.D./ I.D. (For Threading) |
Screw Types (for threading) |
Number of threads (for threading) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | MITSUBISHI MATERIALS | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | TUNGALOY | TUNGALOY | KYOCERA | SANDVIK | TUNGALOY | MISUMI | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | TUNGALOY | TUNGALOY | KYOCERA | KYOCERA | KYOCERA | KYOCERA | TUNGALOY | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | ISCAR | ISCAR | ISCAR | TUNGALOY | KYOCERA | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
Product Series | For Turning, Hexagon Type (80°) Positive Type Insert WBGT Type | 80° Hexagon Insert with Hole Negative WNMG0604○○ "Medium Cutting" | W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-CM "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-SS "Finishing to Cutting" | 80° Hexagon Type Negative with Hole WNMG○○WP "Finishing" with Wiper Cutting Edge | 80° Hexagon Type Negative with Hole WNMG○○PS "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG "Medium to Rough" Aluminum Non Ferrous | Replacement Blade Insert W (Hexagonal) WNMG【10 Pieces Per Package】 | Negative Type 80°, Trigone Tip, for General Purpose Processing | 80° Hexagon Type with Hole Negative WNGG○○-01 "Precision Finishing to Cutting" | 80° Hexagon Type with Hole Negative WNMA "Finishing to Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG○○-ZF "Finishing to Cutting" | 80° Hexagon Type with Hole Negative WNMG0604○○-AFW "Finishing to Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-33 "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-37 "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-CF "Finishing to Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-CH "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-HMM "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-NS "Finishing to Cutting" | 80° Hexagon Type with Hole Negative WNMG-SA "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG-SM "Medium Cutting" | 80° Hexagon Type with Hole Negative WNMG0804○○-TS "Finishing to Cutting" | 80° Hexagon Type with Hole Negative WXGU0403○○R/L-TS "Finishing to Cutting" | 80° Hexagon Type with Hole Negative WXGU0403R/L○○-SS "Low Resistance Type Finishing" | 80° Hexagon Type Negative with Hole WNMG○○WQ "Finishing to Medium" with Wiper Cutting Edge | 80° Hexagon Type Negative with Hole WNMG○○PQ "Finishing to Medium" | 80° Hexagon Type Negative with Hole WNMG○○HQ "Finishing to Medium" | 80° Hexagon Type Negative with Hole WNMGCQ "Finishing to Medium Lifting" | 80° Hexagon Type Negative with Hole WNMG○○CJ "Finishing to Medium Lifting" | 80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG○○PT "Medium to Rough High Feed" | 80° Hexagon Type Negative with Hole WNMG○○GT "Medium to Rough High Feed" | 80° Hexagon Type Negative with Hole WNMG○○XP "Finishing" Mild Steel | 80° Hexagon Type Negative with Hole WNMG○○XQ "Medium Cutting" Mild Steel | 80° Hexagon Type Negative with Hole WNMG○○XS "Rough Cutting" Mild Steel | 80° Hexagon Type Negative with Hole WNMG○○TK "Medium to Rough" Stainless Steel Heat-resistant Alloy | 80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-resistant Alloy | 80° Hexagon Type Negative with Hole WNMG○○MU "Medium to Rough" Stainless Steel Heat-resistant Alloy | 80° Hexagon Type Negative with Hole WNMG○○C "Rough Cutting" Cast Iron | 80° Hexagon Type Negative with Hole WNMG○○ZS "Rough Cutting" Cast Iron | 80° Hexagon Type Negative with Hole WNMG○○GC "Rough Cutting" Cast Iron | 80° Hexagon Type Negative with Hole WNMA○○ Without Breaker "Cast Iron" | |||||||||||||||||||||||||||||||||||||||||||||||
From | ฿ 198.00 | ฿ 500.00 | ฿ 198.00 | ฿ 251.25 | ฿ 310.00 | ฿ 284.43 | ฿ 287.45 | ฿ 373.90 | ฿ 406.00 | ฿ 455.24 | ฿ 356.00 | ฿ 310.00 | ฿ 198.00 | ฿ 310.00 | ฿ 999,999,999.00 | ฿ 1,331.86 | ฿ 320.71 | ฿ 320.71 | ฿ 242.44 | ฿ 242.44 | ฿ 232.79 | ฿ 577.74 | ฿ 563.80 | ฿ 282.42 | ฿ 3,350.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 290.55 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 280.88 | ฿ 198.00 | ฿ 310.00 | ฿ 310.51 | ฿ 283.00 | ฿ 310.00 | ฿ 198.00 | ฿ 310.00 | ฿ 280.88 | ฿ 280.88 | ฿ 280.88 | ฿ 280.88 | ฿ 508.38 | ฿ 474.24 | ฿ 559.64 | ฿ 210.60 | ฿ 281.96 | ฿ 191.91 | ฿ 999,999,999.00 | ฿ 1,269.14 | ฿ 546.87 | ฿ 377.56 | ฿ 301.07 | ฿ 241.21 | ฿ 301.07 | ฿ 287.45 | ฿ 320.71 | ฿ 320.71 | ฿ 320.71 | ฿ 320.71 | ฿ 301.07 | ฿ 287.45 | ฿ 334.33 | ฿ 289.00 | ฿ 540.54 | ฿ 540.54 | ฿ 540.54 | ฿ 254.76 | ฿ 254.76 | ฿ 165.56 | ฿ 254.76 | ฿ 165.56 | ฿ 254.76 | ฿ 254.76 | ฿ 165.56 | ฿ 242.44 | ฿ 242.44 | ฿ 254.76 | ฿ 254.76 | ฿ 254.76 | ฿ 458.59 | ฿ 242.44 | ฿ 242.44 | ฿ 203.00 | ฿ 242.44 | ฿ 242.44 | ฿ 242.44 | ฿ 242.44 | ฿ 254.51 |
Days to Ship | 13 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 5 Day(s) | 5 Day(s) | 19 Day(s) | 3 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | 5 Day(s) | 19 Day(s) | 15 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 7 Day(s) | 15 Day(s) | 5 Day(s) | 11 Day(s) | Quote | Quote | Quote | 15 Day(s) | Quote | Quote | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 5 Day(s) | 7 Day(s) | Same day | 5 Day(s) | 15 Day(s) | 5 Day(s) | Quote | 5 Day(s) | 15 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 15 Day(s) | 15 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 7 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 7 Day(s) | 5 Day(s) | 7 Day(s) | 7 Day(s) | 7 Day(s) | 6 Day(s) | 7 Day(s) | 7 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 7 Day(s) | 7 Day(s) | 7 Day(s) | 7 Day(s) |
Shape | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) |
work material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Stainless Steel | Steel | Steel | Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel | Stainless Steel | Steel | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron | Stainless Steel | Steel | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / High Hardness Material | High Hardness Material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel | Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Stainless Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Steel / Cast Iron / Non-ferrous metal | Steel / Cast Iron / Non-ferrous metal / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy / High Hardness Material | High Hardness Material | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel | Steel | Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Stainless Steel | Cast Iron | Cast Iron | Heat-resistant alloy, titanium alloy | Steel | Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel | Steel | Steel | Steel | Heat-resistant alloy, titanium alloy | Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel / Heat-resistant alloy, titanium alloy | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | - | - | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
Available corners | - | 3 | - | - | - | 6 | 6 | 3 | 4 / 6 | - | 6 | - | - | - | - | 1 | 6 | 6 | 6 | 6 | 6 | 6 | 3 | - | - | 3 | 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 | 6 | 6 | 3 | 1 | 6 | 6 | - | - | 6 | 6 | 6 | 6 | 6 | 6 | - | 6 | - | - | - | - | - | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
Breaker Use | Medium grinding | Finish | Medium grinding | Light Cutting | Medium grinding | Medium grinding | Medium grinding | Finish | Finish / Medium grinding | Finish / Medium grinding / Medium to coarse grinding | Medium grinding | Rough cutting | Medium grinding | Rough cutting | - | - | Medium grinding | Finish | Finish | Medium to deep grinding | Medium grinding | Medium to deep grinding | Finish | - | Medium grinding | - | - | - | Finish | Finish | Finish | - | - | Medium grinding | - | Medium grinding | Medium grinding | - | Light Cutting | Light Cutting | Light Cutting | Light Cutting | Medium grinding | - | - | - | Finish | Heavy cutting | Medium to deep grinding | - | - | Finish | Medium grinding | - | - | Medium to deep grinding | Medium grinding | Medium grinding | Finish | Medium to deep grinding | Medium grinding | - | Medium grinding | Medium grinding | Finish | - | - | - | Medium grinding | Finish | Finish | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium to deep grinding | Medium to deep grinding | Medium to deep grinding | Finish | Medium grinding | Heavy cutting | Medium to deep grinding | Medium to deep grinding | Medium grinding | Medium to deep grinding | Medium to deep grinding | Heavy cutting | Heavy cutting | Heavy cutting | Medium grinding |
Rake angle | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | - | - | - | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
Nose R | 0.4 ~ 1.6 | - | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.6 | - | - | 0.2 ~ Other | 0.4 ~ 1.6 | - | 0.8 | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.2 ~ 0.8 | - | - | 0.4 ~ 0.8 | 0.4 ~ 1.6 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | - | Other | 0.8 | 0.8 | 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.8 ~ 1.6 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.8 ~ 1.6 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.6 | - | - | 0.2 | 0.4 ~ 1.2 | 1.2 | 0.4 ~ 1.6 | - | 0.2 ~ 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 ~ 1.2 | 0.2 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.2 |
Selfishly | - | Right-hand / Left-hand | - | - | - | No-hand | No-hand | Right-hand / Left-hand | No-hand | - | No-hand | - | - | - | - | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Left-hand | - | No-hand | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | No-hand | - | - | - | Left-hand | No-hand | No-hand | - | - | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | - | No-hand | - | - | - | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Outer Diameter | Outer Diameter | Outer Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?