(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
M Class Insert (with GJ Breaker) DNMG○○○-GJ
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with GJ Breaker) WNMG○○○○○○-GJ
MITSUBISHI MATERIALS
From: ฿ 280.88 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with GM Breaker) CNMG○○○-GM【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 300.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with GM Breaker) VNMG-GM
MITSUBISHI MATERIALS
From: ฿ 258.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with GM Breaker) WNMG○○○○○○-GM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with HV Breaker) CNMM○○○-HV
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with HV Breaker) SNMM○○○-HV
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with HX Breaker) SNMM○○○-HX
MITSUBISHI MATERIALS
First recommended chipbreaker for heavy cutting of carbon steel and alloy steel SNMM○○○-HX.
[Features]
- 90° square, negative insert, with hole-
M-class single-sided chip breaker- Covers
the middle area of the heavy-duty cutting area . Good chip disposal performance・It has an appropriate chip pocket and good chip evacuation performance [Applications]・For lathe turning of carbon steel and alloy steel, heavy cutting
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with HZ Breaker) CNMM○○○-HZ
MITSUBISHI MATERIALS
CNMM○○○-HZ, a specialist in heavy-duty machining of carbon steel and alloy steel.
[Features]
- 80° rhombus, negative insert, with
hole- Assist breaker for carbon steel and alloy steel-
Low resistance type with the best sharpness-
Teardrop shaped dots for good chip disposal over a wide range
[Applications]
・For heavy-duty turning
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with HZ Breaker) DNMM○○○-HZ
MITSUBISHI MATERIALS
DNMM○○○-HZ, a specialist in heavy-duty machining of carbon steel and alloy steel.
[Features]
- 55° rhombus, negative insert, with
hole- Assist breaker for carbon steel and alloy steel-
Low resistance type with the best sharpness-
Teardrop-shaped dots for good chip disposal in a wide range
[Applications]
・For heavy-duty turning
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with HZ Breaker) SNMM○○○-HZ
MITSUBISHI MATERIALS
SNMM○○○-HZ, a specialist in heavy-duty machining of carbon steel and alloy steel.
[Features]
- 90° square, negative insert, with
hole- Assist breaker for carbon steel and alloy steel-
Low resistance type with the best sharpness-
Tear drop dots for excellent chip disposal in a wide range
[Applications]
・For heavy-duty turning
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
Positive Insert For Turning (With LM Breaker) CCMT○○○-LM
MITSUBISHI MATERIALS
From: ฿ 196.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LM Breaker) DNMG○○○○○○-LM【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 262.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LM Breaker) DNMG-LM
MITSUBISHI MATERIALS
From: ฿ 262.00 |
---|
Days to Ship: 15 Day(s) |
M-Class Insert (With LM Breaker) SCMT○○○-LM
MITSUBISHI MATERIALS
From: ฿ 242.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LM Breaker) SNMG○○○-LM
MITSUBISHI MATERIALS
From: ฿ 300.00 |
---|
Days to Ship: 15 Day(s) |
M-Class Insert (With LM Breaker) VBMT○○○-LM【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 416.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LM Breaker) VNMG○○○-LM
MITSUBISHI MATERIALS
From: ฿ 258.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LM Breaker) WNMG○○○-LM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LP Breaker) DNMG○○○-LP
MITSUBISHI MATERIALS
First recommended breaker M class insert for light cutting of carbon steel and alloy steel (with LP breaker) DNMG○○○-LP.
[Features]
- 55° rhombus, negative insert, with hole-
M-class double-sided chip breaker- Achieves
stable chip disposal in the light cutting area-
Curved cutting edge enables smooth chip discharge-
UE6105 made of steel- MC6115 for stable cutting, UE6110, MC6015, MP3025 for general cutting (guidelines for cutting conditions)
[Applications]
- For turning carbon steel and alloy steel, light cutting
From: ฿ 326.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with LP Breaker) SNMG○○○-LP
MITSUBISHI MATERIALS
First recommended breaker for light cutting of carbon steel and alloy steel SNMG○○○-LP.
[Features]
・90° square, negative insert, with hole
・M-class double-sided chip breaker
・Achieves stable chip disposal in the light cutting area
・Smooth chip discharge is possible with the curved cutting edge
・Ue6105 steel, MC6115 for stable cutting, UE6110, MC6015, MP3025 for general cutting (guidelines for cutting conditions)
[Applications]
- For turning carbon steel and alloy steel, light cutting
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with LP Breaker) VNMG○○○-LP
MITSUBISHI MATERIALS
First recommended chipbreaker for light cutting of carbon steel and alloy steel VNMG○○○-LP.
[Features]
- 35° diamond shape, negative insert, with hole-
M-class double-sided chip breaker- Realizes
stable chip disposal in the light cutting area-
Curved cutting edge enables smooth chip discharge-
UE6105 and MC6115 are Stable cutting
of steel・UE6110・MC6015・MP3025 are for general cutting of steel (guidelines for cutting conditions)
[Applications]
・For turning and light cutting of carbon steel and alloy steel
From: ฿ 264.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with LP Breaker) WNMG-LP
MITSUBISHI MATERIALS
First recommended breaker WNMG-LP for light cutting of carbon steel and alloy steel.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Achieves stable chip disposal in the light cutting area
・Smooth chip discharge is possible with the curved cutting edge
・For steel, UE6105 and MC6115 are for stable cutting (cutting condition guideline), UE6110, MC6015 and MP3025 are for general cutting (cutting condition guideline)
[Use]
・For turning carbon steel and alloy steel, light cutting
From: ฿ 251.25 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MH Breaker) SNMG○○○-MH
MITSUBISHI MATERIALS
Alternative chipbreaker for medium cutting of alloy steel SNMG○○○-MH.
[Features]
・90° square, negative insert, with hole
・M-class double-sided chip breaker
・High cutting edge strength with flat land blade type・Excellent
chip disposal with moderate chip pocket
・UE6105 and MC6115 are made of steel, US7020 is made of steel Stable cutting of stainless steel (guideline for cutting condition)
・MC6015・UE6110 is steel, general cutting (guideline for cutting condition)
[Use]
・For turning and medium cutting of alloy steel
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MH Breaker) VNMG○○○-MH
MITSUBISHI MATERIALS
Alternative chipbreaker for medium cutting of alloy steel VNMG○○○-MH.
[Features]
- 35° rhombus, negative insert, with hole-
M-class double-sided chip breaker-
Flat land blade type for high cutting edge strength-
Moderate chip pocket for good chip
control- UE6105 is steel, US7020 is stainless steel Stable cutting (guideline for cutting conditions)
・MC6015・UE6110・MC6115 for general cutting of steel and UC5115 for cast iron (guideline for cutting conditions)
[Use]
・For turning and medium cutting of alloy steel
From: ฿ 264.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with MH Breaker) WNMG○○○-MH
MITSUBISHI MATERIALS
Alternative chipbreaker for medium cutting of alloy steel.
[Features]
- 80° equilateral unequal hexagonal shape, negative insert, with hole-
M-class double-sided chip breaker- flat land blade type for high cutting edge strength-
moderate chip pocket for good chip
control- UE6105 and MC6115 are Stable cutting of steel (guideline for cutting conditions)
・US7020 is for stable cutting of stainless steel (guideline for cutting conditions)
[Applications]
・For turning and medium cutting of alloy steel
From: ฿ 310.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with MJ Breaker) WNMG○○○○○○-MJ
MITSUBISHI MATERIALS
From: ฿ 310.51 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MM Breaker) DNMG○○○○○○-MM
MITSUBISHI MATERIALS
From: ฿ 320.00 |
---|
Days to Ship: 10 Day(s) |
M-Class Insert (With MM Breaker) SCMT○○○-MM
MITSUBISHI MATERIALS
From: ฿ 242.00 |
---|
Days to Ship: 10 Day(s) |
M-Class Insert (With MM Breaker) TCMT○○○-MM
MITSUBISHI MATERIALS
From: ฿ 194.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MM Breaker) TNMG○○○-MM
MITSUBISHI MATERIALS
From: ฿ 248.00 |
---|
Days to Ship: 10 Day(s) |
M-Class Insert (With MM Breaker) VBMT○○○-MM
MITSUBISHI MATERIALS
From: ฿ 544.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MM Breaker) VNMG○○○-MM
MITSUBISHI MATERIALS
From: ฿ 258.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MP Breaker) CNMG-MP
MITSUBISHI MATERIALS
M-class insert (with MP chipbreaker) CNMG-MP with chip control that follows changes in cutting speed.
[Features]
・The breaker shape achieves good chip control, low cutting heat, and high wear resistance over a wide range
・Greatly improves productivity
・80° rhombus, negative insert, with hole
・UE6105 is for stable cutting of steel ( Standard cutting condition)
・UE6110・MC6015・MP3025 for general cutting of steel (standard cutting condition)
・UC5115 for general cutting of cast iron (standard cutting condition)
・MP3025 general cutting for steel (standard cutting condition)
・MC6115 is for stable cutting of steel (a guideline for cutting conditions)
[Use]
・For lathe machining・copy
machining, ideal for machining where cutting conditions such as depth of cut, feed amount, and cutting speed fluctuate greatly.
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MP Breaker) DNMG○○○○○○-MP
MITSUBISHI MATERIALS
An M-class insert that achieves good chip control, low cutting heat, and high wear resistance in a wide range of areas due to its original chipbreaker shape.
[Features]
- 55° rhombus, negative insert, with holes,
chip control follows changes in depth of cut, feed, and cutting speed.-
Greatly improves productivity.-
Controls crater wear due to low cutting heat. The temperature of the work material is also reduced
・Stable cutting of steel for UE6105・MC6115・MC6015 (reference for cutting condition)
・General cutting for MP3025・UE6110 for steel and UC5115 for cast iron (reference for cutting condition)
[Use]
・Medium cutting Optimal for processing where cutting conditions such as depth of cut, feed amount, and cutting speed fluctuate greatly in applications
, turning , and profiling.
From: ฿ 326.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MP Breaker) SNMG○○○-MP
MITSUBISHI MATERIALS
Interpolation breaker M class insert for finishing and light cutting of cast iron (with MA breaker) SNMG○○○-MA.
[Features]
- 90° square, negative insert, with hole-
M-class double-sided chip breaker-
Ideal for general-purpose
areas- Positive land blade shape for excellent sharpness-
UE6105 and MC6115 are made of steel, and UC5105 and MC5005 are made of cast iron for stable cutting (
UE6110 / NX3035 / MC6015 are steel, MC7025 is stainless steel, MC5015 / UC5115 are cast iron, MP9015 is heat resistant alloy / titanium alloy, general cutting (cutting condition guideline) [
Usage]
Cast iron for turning, finishing and light cutting
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MP Breaker) TNMG-MP
MITSUBISHI MATERIALS
M-class insert with MP breaker for turning that allows chip control to follow changes in cutting speed.
[Features]
・With its unrivaled breaker shape, it achieves excellent chip control, low cutting heat, and high wear resistance in a wide range of areas
・Greatly improves productivity
・60° equilateral triangle, negative insert, with hole
・UE6105・MC6115 is for stable cutting of steel (a guideline for cutting conditions)
・UE6110・MC6015・MP3025 is for general cutting of steel (a guideline for cutting conditions)
・UC5115 is for general cutting of cast iron (a guideline for cutting conditions)
[Applications]
・For profiling, cutting depth Optimal for machining where cutting conditions such as volume, feed rate, and cutting speed fluctuate greatly
From: ฿ 250.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MP Breaker) WNMG○○○-MP
MITSUBISHI MATERIALS
M-class insert that achieves good chip control, low cutting heat, and high wear resistance in a wide range of areas due to its original chipbreaker shape.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・Chip disposal follows fluctuations in depth of cut, feed, and cutting speed・
Greatly improves productivity
・Reduces crater wear due to low cutting heat . The temperature of the work material is also reduced
・Stable cutting of steel for UE6105・MC6115 (guideline for cutting condition)
・General cutting for MP3025・UE6110・MC6015 steel and cast iron for UC5115 (guideline for cutting condition)
[Use]
・For medium turning
・Ideal for turning
and profiling where cutting conditions such as depth of cut, feed, and cutting speed fluctuate greatly.
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M-Class Insert (With MS Breaker) VNMG○○○-MS
MITSUBISHI MATERIALS
From: ฿ 412.00 |
---|
Days to Ship: 16 Day(s) |
M-Class Insert (With MS Breaker) WNMG○○○○○○-MS
MITSUBISHI MATERIALS
From: ฿ 283.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MV Breaker) CCMH○○○-MV
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (with MV Breaker) VCMT○○○-MV
MITSUBISHI MATERIALS
From: ฿ 400.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MW Breaker) CNMG○○○-MW
MITSUBISHI MATERIALS
Negative insert with wiper for medium cutting of carbon steel, alloy steel, mild steel and stainless steel.
[Features]
・CNMG○○○-MW
・80°rhombic, with holes・Roughing
and finishing can be done in one shot with a high-efficiency insert that maintains surface roughness even when the feed is increased
・Corner radius and A wiper blade is installed at the connecting part of the straight blade
・Wide chip pocket prevents chip clogging
・Stable cutting of UC5105 and MC5005 cast iron with UE6105 steel (guideline for cutting conditions)
・Stable cutting of MC6115 steel with US7020 stainless steel (Guidelines for cutting conditions)
-MC6015 and UE6110 steel, MC5015 cast iron, general cutting (Guidelines for cutting conditions)
[Use] -For
medium cutting
From: ฿ 310.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with MW Breaker) WNMG○○○-MW
MITSUBISHI MATERIALS
Negative insert with wiper for medium cutting of carbon steel, alloy steel, mild steel, and stainless steel.
[Features]
・WNMG○○○○○○-MW
・80° equilateral unequal angle hexagon, with holes
・Rough cutting and finishing in one shot with a high-efficiency insert that can maintain surface roughness even when the feed is increased.
・A wiper blade is installed at the connecting part of the corner radius and the straight blade
・Wide chip pocket prevents chip clogging・MC5005
/UC5105 cast iron, MC6115/UE6105 steel for stable cutting (guideline for cutting conditions)
・MC6015 / UE6110 is steel, and MC5015 / UC5115 is cast iron for general cutting (guidelines for cutting conditions)
[Application]
- For medium cutting
From: ฿ 310.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with RM Breaker) DNMG○○○-RM
MITSUBISHI MATERIALS
From: ฿ 320.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with RM Breaker) WNMG○○○○○○-RM
MITSUBISHI MATERIALS
From: ฿ 198.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with RP Breaker) TNMG○○○-RP
MITSUBISHI MATERIALS
M-class insert for rough cutting of carbon steel and alloy steel (with RP breaker) TNMG○○○-RP.
[Features]
・60° equilateral triangle, negative insert, with hole
・M-class double-sided chip breaker
・Suitable for intermittent cutting and black
scale cutting・Realizes a tough cutting edge and low cutting resistance due to the optimum rake angle
・UE6105 steel, MC6115 for stable cutting, UE6110, MC6015 for general cutting (guidelines for cutting conditions)
[Use] - For
turning and rough cutting of carbon steel and alloy steel
From: ฿ 250.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with RP Breaker) WNMG○○○-RP
MITSUBISHI MATERIALS
M-class insert for rough cutting of carbon steel and alloy steel (with RP breaker) WNMG○○○-RP.
[Features]
・80° equilateral and unequal hexagon, negative insert, with hole
・M-class double-sided chip breaker
・suitable for interrupted cutting and black
scale cutting・achieves a tough cutting edge and low cutting resistance due to the optimum rake angle
・For steel, UE6105 and MC6115 are for stable cutting, while UE6110 and MC6015 are for general cutting (a guideline for cutting conditions)
[Use] - For
turning and rough cutting of carbon steel and alloy steel
From: ฿ 310.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with SA Breaker) SNMG○○○-SA
MITSUBISHI MATERIALS
M grade insert (with SA breaker) SNMG○○○-SA.
[Features]
・90°square, with hole
・M-class double-sided chip breaker
・Excellent chip control on the low feed side within the light cutting range
・Ideal for copying and pulling machining due to the waveform cutting edge・Work
material hardness 200 -Recommended
for 300HB・Stable cutting for UE6105・MC6115 for steel, general cutting for UE6110・NX3035 for steel (guidelines for cutting conditions)
[Applications]
・For lathe turning and light cutting of carbon steel and alloy steel
From: ฿ 310.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with SA Breaker) WNMG○○○-SA
MITSUBISHI MATERIALS
M grade insert (with SA breaker) WNMG○○○○○○-SA.
[Features]
・80° equilateral unequal hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Excellent chip control on the low feed side within the light cutting area・
Mimicking and pulling processing with wave cutting edge
・Recommended for work material hardness 200-300HB・
NX2525 for stable cutting of steel, stainless steel and cast iron (guideline for cutting conditions)
・MC6115・UE6105 for stable cutting of steel (guideline for cutting conditions)
・NX3035・UE6110・MC6015 is for general cutting of steel (a guideline for cutting conditions)
[Applications]
- For turning carbon steel and alloy steel, light cutting
From: ฿ 310.00 |
---|
Days to Ship: 15 Day(s) |
M Class Insert (with SH Breaker) DNMG○○○○○○-SH
MITSUBISHI MATERIALS
M grade insert (with SH breaker) DNMG○○○○○○-SH.
[Features]
・55°rhombic, negative insert, with hole
・M-class double-sided chip breaker
・Low depth of cut in the light cutting area・Ideal for high feed areas
・Smooth chip discharge is possible with the curved cutting edge
・Work material hardness Recommended
for 160-250HB・NX2525・AP25N for stable cutting of steel, stainless steel and cast iron, UE6105・MC6115 for steel (guidelines for cutting conditions)
・NX3035・MC6015・UE6110 for steel, UC5115 for general cutting (cutting conditions ) for steel [
Use]
・For turning carbon steel and alloy steel, light cutting
From: ฿ 326.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SH Breaker) SNMG○○○-SH
MITSUBISHI MATERIALS
Interpolation M-class insert for light cutting of carbon steel and alloy steel (with SH breaker) SNMG○○○-SH.
[Features]
・M-class double-sided chip breaker
・The curved cutting edge enables smooth chip evacuation・Recommended for
work material hardness 160-250HB
・MC6115 and UE6105 are for stable cutting of steel (a guideline for cutting conditions)
・UE6110 is General cutting of steel (guideline for cutting condition)
・UC5115 for general cutting of cast iron (guideline for cutting condition)
・NX2525 for stable cutting of steel, stainless steel and cast iron (guideline for cutting condition)
[Use]
・Within light cutting area Ideal for low depth of cut and high feed cutting areas
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SH Breaker) WNMG○○○-SH
MITSUBISHI MATERIALS
M grade insert (with SH breaker) WNMG-SH.
[Features]
・80° equilateral unequal hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Low depth of cut in the light cutting area・Ideal for high feed areas
・Smooth chip discharge is possible with the curved cutting edge
・Recommended for work material hardness 160-250HB
・NX2525 for stable cutting of steel, stainless steel and cast iron (guideline for cutting conditions)
・MC6115 and UE6105 for stable cutting of steel ( guideline for cutting conditions) ・UE6110 and
MC6015 for steel General cutting (guideline for cutting condition)
・General cutting with UC5115 cast iron (guideline for cutting condition)
[Application]
・For turning carbon steel and alloy steel, light cutting
From: ฿ 280.88 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SV Breaker) CCMH○○○-SV
MITSUBISHI MATERIALS
Alternative chipbreaker for light cutting of carbon steel/alloy steel, mild steel, and stainless steel.
[Features]
・Good sharpness with a large rake angle
・With the peninsula dot, chips are reliably controlled even when cutting 1 mm or less
[Applications]
・For turning carbon steel/alloy steel, mild steel, stainless steel, and interpolation for light cutting
From: ฿ 221.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SV Breaker) VBMT○○○-SV
MITSUBISHI MATERIALS
From: ฿ 506.00 |
---|
Days to Ship: 10 Day(s) |
M-Class Insert 35°, VC With Hole, ○○-Type, Positive 7° VCMT-SV
MITSUBISHI MATERIALS
Alternative chipbreaker for light cutting of carbon steel/alloy steel, mild steel, and stainless steel.
[Features]
・Good sharpness with a large rake angle.
・The peninsula dot reliably controls chips even when cutting 1 mm or less.
[Use]
・For turning carbon steel/alloy steel, mild steel, and stainless steel, and interpolation for light cutting.
From: ฿ 506.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SW Breaker) CNMG○○○-SW
MITSUBISHI MATERIALS
Insert with wiper for light cutting of carbon steel, alloy steel, mild steel, and stainless steel CNMG○○○-SW.
[Features]
・80° rhombus, negative insert, with hole
・High-efficiency insert that maintains surface roughness even when feed is increased, allowing rough cutting and finishing in one shot
・Positive land suitable for internal diameter machining Improved sharpness. Prevents chatter
・Wide chip pocket prevents chip clogging
・MC5005 for cast iron, NX2525 for steel, stainless steel and cast iron for stable cutting (guidelines for cutting conditions)
・US7020 for stainless steel, MC6115 and UE6105 for steel, Stable cutting (reference for cutting condition)
・MC5015 is cast iron, NX3035, MP3025, MC6015, UE6110 is steel, general cutting (reference for cutting condition)
[Usage]
・For light cutting
From: ฿ 310.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SW Breaker) DNMX○○○○○○-SW
MITSUBISHI MATERIALS
Insert with wiper for light cutting of carbon steel, alloy steel, mild steel, and stainless steel DNMX○○○○○○-SW.
[Features]
- 55° diamond shape, negative insert, with hole.
・The high-efficiency insert that maintains surface roughness even when the feed rate is increased enables roughing and finishing in one shot.
・Sharpness is improved with a positive land suitable for inner diameter machining. Prevent chatter.
・Wide chip pocket prevents chip clogging.
[Use]
・For light cutting.
From: ฿ 447.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SW Breaker) TNMX○○○-SW
MITSUBISHI MATERIALS
Insert with wiper for light cutting of carbon steel, alloy steel, mild steel, and stainless steel TNMX○○○-SW.
[Features]
- 60° equilateral triangle, negative insert, with hole.
・The high-efficiency insert that maintains surface roughness even when the feed rate is increased enables roughing and finishing in one shot.
・Sharpness is improved with a positive land suitable for inner diameter machining. Prevent chatter.
・Wide chip pocket prevents chip clogging.
[Use]
・For light cutting.
From: ฿ 316.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SY Breaker) CNMG○○○-SY
MITSUBISHI MATERIALS
From: ฿ 354.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SY Breaker) DNMG○○○○○○-SY
MITSUBISHI MATERIALS
Chipbreaker for medium finishing of low carbon steel.
[Features]
- DNMG○○○○○○-SY.
· 55° rhombus, negative insert, with hole.
・A steep wall?
· Achieves outstanding chipping treatment for iron plate materials and low-carbon steel materials.
[Applications]
・Ideal for semi-finish turning for low carbon steel.
From: ฿ 447.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SY Breaker) SNMG○○○-SY
MITSUBISHI MATERIALS
From: ฿ 416.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SY Breaker) TNMG○○○-SY
MITSUBISHI MATERIALS
From: ฿ 316.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with SY Breaker) WNMG○○○○○○-SY
MITSUBISHI MATERIALS
M grade insert with SY breaker for medium finishing of low carbon steel.
[Features]
- 80° equilateral scalene hexagon, negative insert, with hole.
・Excellent chip control is achieved with iron plate materials and low-carbon steel materials.
- Reliable curling even in profiling machining due to the use of a wave-shaped cutting edge.
・Reliable curl is achieved by combining peninsula dots and a rake face with a large pocket.
[Applications]
・Ideal for semi-finish turning for low carbon steel.
From: ฿ 280.88 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (New Petit Cutter) NP-CCMB○○○G
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (New Petit Cutter) NP-CCMH○○○○○○
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (New Petit Cutter) NP-CCMW○○○○○○
MITSUBISHI MATERIALS
From: ฿ 2,561.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (New Petit Cutter) NP-CNMM○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (New Petit Cutter) NP-CPMB○○○G
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (New Petit Cutter) NP-DCMT○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 2,179.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (New Petit Cutter) NP-DCMW○○○○○
MITSUBISHI MATERIALS
From: ฿ 1,103.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (New Petit Cutter) NP-DNMM○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M-Class Insert (New Petit Cut) NP-SNMA○○○○
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (New Petit Cutter) NP-SNMM○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M-Class Insert (New Petit Cut) NP-TNMA○○○○○○
MITSUBISHI MATERIALS
From: ฿ 805.16 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (New Petit Cutter) NP-TNMM○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (New Petit Cutter) NP-TPMB○○○G
MITSUBISHI MATERIALS
From: ฿ 884.98 |
---|
Days to Ship: 10 Day(s) |
M-Class Insert (New Petit Cut) NP-VNMA○○○○
MITSUBISHI MATERIALS
From: ฿ 990.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (New Petit Cutter) NP-WCMW○○○FA
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (No Breaker) CNMA○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) CNMA○○○.
[Features]
・Flat top
・80° rhombus, negative insert, with hole
・UC5105, HTi05T are cast iron for stable cutting (cutting condition guideline)
・MC5005・UC5115 are cast iron for general cutting (cutting condition guideline)
・HTi10 For general cutting of cast iron, non-ferrous metals, heat-resistant alloys, and titanium alloys (a guideline for cutting conditions)
[Applications]
・Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating
・For turning cast iron, rough cutting breaker for
From: ฿ 260.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (No Breaker) CPMX○○○○○○
MITSUBISHI MATERIALS
From: ฿ 302.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (No Breaker) SCMW○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) SCMW○○○.
[Features]
- Flat top.
· Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating.
[Use]
・Breaker for turning and rough cutting of cast iron.
From: ฿ 324.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (No Breaker) SNMA○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) SNMA○○○.
[Features]
・Flat top
・Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating.
[Applications]
・Breaker for turning and rough cutting of cast iron
From: ฿ 258.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (No Breaker) TNMN○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) TNMN○○○.
[Features]
- Flat top.
・High cutting edge strength and stable seating.
[Applications]
・Ideal for unstable cutting such as intermittent cutting.
From: ฿ 344.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (No Breaker) VCMW○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) VCMW○○○.
[Features]
- Flat top.
· Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating.
[Use]
・Breaker for turning and rough cutting of cast iron.
From: ฿ 567.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (No Breaker) WNMA○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) WNMA○○○○○○.
[Features]
・Flat top
・High cutting edge strength and stable seating
From: ฿ 999,999,999.00 |
---|
Days to Ship: Quote |
M Class Insert (without Breaker) TPMR○○○
MITSUBISHI MATERIALS
From: ฿ 196.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with Breaker) TPMX○○○
MITSUBISHI MATERIALS
From: ฿ 314.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with Breaker) TPMX○○○L
MITSUBISHI MATERIALS
From: ฿ 450.00 |
---|
Days to Ship: 10 Day(s) |
M Class Insert (with MM Breaker) CNMG○○○-MM
MITSUBISHI MATERIALS
From: ฿ 300.00 |
---|
Days to Ship: 10 Day(s) |
Brand |
---|
Product Series |
CAD |
From |
Days to Ship |
Shape |
work material |
Application |
Available corners |
Breaker Use |
Rake angle |
Nose R |
Selfishly |
Groove Width (For Grooving / Plunging) |
Pitch (for Threading) |
O.D./ I.D. (For Threading) |
Screw Types (for threading) |
Number of threads (for threading) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS |
Product Series | M Class Insert (with GM Breaker) CNMG○○○-GM【1-10 Pieces Per Package】 | M Class Insert (with LM Breaker) DNMG○○○○○○-LM【1-10 Pieces Per Package】 | M-Class Insert (With LM Breaker) VBMT○○○-LM【1-10 Pieces Per Package】 | M-Class Insert 35°, VC With Hole, ○○-Type, Positive 7° VCMT-SV | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CAD | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
From | ฿ 999,999,999.00 | ฿ 280.88 | ฿ 300.00 | ฿ 258.00 | ฿ 198.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 196.00 | ฿ 262.00 | ฿ 262.00 | ฿ 242.00 | ฿ 300.00 | ฿ 416.00 | ฿ 258.00 | ฿ 198.00 | ฿ 326.00 | ฿ 310.00 | ฿ 264.00 | ฿ 251.25 | ฿ 310.00 | ฿ 264.00 | ฿ 310.00 | ฿ 310.51 | ฿ 320.00 | ฿ 242.00 | ฿ 194.00 | ฿ 248.00 | ฿ 544.00 | ฿ 258.00 | ฿ 310.00 | ฿ 326.00 | ฿ 310.00 | ฿ 250.00 | ฿ 310.00 | ฿ 412.00 | ฿ 283.00 | ฿ 999,999,999.00 | ฿ 400.00 | ฿ 310.00 | ฿ 310.00 | ฿ 320.00 | ฿ 198.00 | ฿ 250.00 | ฿ 310.00 | ฿ 310.00 | ฿ 310.00 | ฿ 326.00 | ฿ 310.00 | ฿ 280.88 | ฿ 221.00 | ฿ 506.00 | ฿ 506.00 | ฿ 310.00 | ฿ 447.00 | ฿ 316.00 | ฿ 354.00 | ฿ 447.00 | ฿ 416.00 | ฿ 316.00 | ฿ 280.88 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 2,561.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 2,179.00 | ฿ 1,103.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 805.16 | ฿ 999,999,999.00 | ฿ 884.98 | ฿ 990.00 | ฿ 999,999,999.00 | ฿ 260.00 | ฿ 302.00 | ฿ 324.00 | ฿ 258.00 | ฿ 344.00 | ฿ 567.00 | ฿ 999,999,999.00 | ฿ 196.00 | ฿ 314.00 | ฿ 450.00 | ฿ 300.00 |
Days to Ship | Quote | 10 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | Quote | Quote | Quote | Quote | Quote | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 15 Day(s) | 15 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 16 Day(s) | 10 Day(s) | Quote | 10 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | Quote | Quote | 10 Day(s) | Quote | Quote | 10 Day(s) | 10 Day(s) | Quote | Quote | Quote | 10 Day(s) | Quote | 10 Day(s) | 10 Day(s) | Quote | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | Quote | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) |
Shape | D (55° Diamond-Shape) | W (Hexagonal Type) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | W (Hexagonal Type) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | W (Hexagonal Type) | D (55° Diamond-Shape) | S (Rectangular) | V (35° Diamond-Shaped) | W (Hexagonal Type) | S (Rectangular) | V (35° Diamond-Shaped) | W (Hexagonal Type) | W (Hexagonal Type) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | V (35° Diamond-Shaped) | W (Hexagonal Type) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | W (Hexagonal Type) | D (55° Diamond-Shape) | W (Hexagonal Type) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | W (Hexagonal Type) | D (55° Diamond-Shape) | S (Rectangular) | W (Hexagonal Type) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | Other | C (80° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | W (Hexagonal Type) | T (Triangle) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) |
work material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel | Steel / Cast Iron | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | High Hardness Material | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | High Hardness Material | Non-ferrous metal | High Hardness Material | Non-ferrous metal | Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Non-ferrous metal | Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Non-ferrous metal | High Hardness Material | Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron / Non-ferrous metal | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Stainless Steel |
Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | - | - | - | - | - | - | - | - |
Breaker Use | - | - | Medium grinding | Medium grinding | Medium grinding | Heavy cutting | Heavy cutting | Heavy cutting | Heavy cutting | Heavy cutting | Heavy cutting | - | - | - | - | - | - | - | - | Light Cutting | Light Cutting | Light Cutting | Light Cutting | Medium grinding | Medium grinding | Medium grinding | - | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | - | - | Rough cutting | Rough cutting | Light Cutting | Light Cutting | Light Cutting | Light Cutting | Light Cutting | - | - | Light Cutting | Light Cutting | Light Cutting | Light Cutting | - | Light Cutting | - | - | Light Cutting | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Medium grinding | Medium grinding | - | - | - | - | - | Medium grinding | - | Finish | Medium grinding |
Rake angle | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Pozidriv | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Negative |
Nose R | 0.8 ~ 1.6 | 0.8 ~ 1.6 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 1.6 | 1.6 | 1.2 ~ 2.4 | 1.2 ~ 1.6 | 0.8 ~ 1.2 | 1.2 ~ 1.6 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.8 ~ 1.6 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.8 ~ 1.6 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.8 ~ 1.6 | 0.4 ~ 0.8 | 0.8 | 0.4 ~ 1.6 | 0.4 ~ 1.6 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.6 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.2 ~ 0.4 | 0.2 ~ 0.4 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.6 | 0.8 ~ 1.2 | 0.8 ~ 1.6 | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.2 ~ 0.4 | 0.4 ~ 0.8 | 0.2 ~ 0.4 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 | 0.2 | 0.2 ~ 0.4 | 0.2 ~ 0.8 | 0.4 | 0.2 ~ 0.4 | 0.4 | 0.2 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.4 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.6 | 0.4 ~ 0.8 | 0.4 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ 1.2 | 0.4 ~ 0.8 | 0.4 | 0.8 ~ 1.6 |
Selfishly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Right-hand / Left-hand | - | Right-hand / Left-hand | - | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | - | No-hand | - | - | - | - | - | - | - | - | Left-hand | Left-hand | - |
Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?