(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Turning Inserts（Application：Outer Diameter/Inner Diameter Page2）

An online store for inserts (for turning). In MISUMI's e-catalog, specifications/dimensions of brand, shape, application, compatible work materials, etc. can be selected with one click, so you can easily find the desired product.
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.

Configure

Specification/Dimensions

Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
Clear

work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
Clear

Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
Clear

Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
Clear

Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Intermittent
- Medium to coarse grinding
- Finishing To Medium Cutting
Clear

Rake angle
- Negative
- Pozidriv
Clear

Nose R
0.2

0.3

0.4

0.5

0.8

1.2

1.6

2.4

Other
Clear

Selfishly
- Right-hand
- Left-hand
- No-hand
Clear

Groove Width (For Grooving / Plunging)
0.15

0.2 mm

0.3

0.4 mm

0.5

0.50 mm

0.50(±0.02)

0.70 mm

0.73 mm

0.75

0.75 mm

0.75(±0.02)

0.80mm

0.80 mm

0.8 mm

0.80(±0.02)

0.83 mm

0.85(±0.02)

0.93 mm

0.95

0.95(±0.02)

1

1.00mm

1.00 mm

1.0(±0.02)

1.00(±0.02)

1.00(±0.025)

1.04(±0.02)

1.19(±0.02)

1.2

1.20mm

1.20 mm

1.20(±0.02)

1.2(±0.02)

1.20(+0.03/-0.04)

1.2(±0.1)

1.25

1.25 mm

1.25(±0.02)

1.3

1.4

1.40 mm

1.40(±0.02)

1.40(±0.04)

1.40(±0.1)

1.45

1.47(±0.02)

1.5

1.50 mm

1.5 mm

1.50(±0.02)

1.5(±0.02)

1.50(±0.025)

1.57(±0.02)

1.58(+0.03/-0.04)

1.6

1.60(+0.03/-0.04)

1.6(±0.1)

1.7

1.70 mm

1.70(±0.02)

1.75

1.75 mm

1.78(±0.02)

1.80mm

1.8(±0.02)

1.85

1.85 mm

1.85(±0.02)

1.96(±0.02)

1.98 mm

2

2.00 mm

2.00mm

2.00 mm

2.0 mm

2.00(±0.02)

2.0(±0.02)

2.00(±0.025)

2.00(±0.03)

2.00(±0.04)

2.0(±0.1)

2.00(±0.1)

2.05(±0.1)

2.10(±0.04)

2.1(±0.1)

2.15

2.15 mm

2.2

2.20mm

2.20(±0.03)

2.20(+0.03/-0.04)

2.2(±0.05)

2.2(±0.1)

2.22(±0.02)

2.23 mm

2.24 mm

2.25

2.30

2.30(±0.02)

2.35

2.39

2.39 mm

2.39(±0.02)

2.40(+0.03/-0.04)

2.40(±0.04)

2.4(±0.05)

2.4(±0.1)

2.40(±0.1)

2.46 mm

2.47

2.47(±0.02)

2.5

2.50mm

2.5mm

2.50 mm

2.5 mm

2.50(±0.02)

2.5(±0.02)

2.50(±0.025)

2.65

2.65 mm

2.67 mm

2.70

2.7mm

2.70(±0.02)

2.79 mm

2.8

2.87(±0.02)

2.90

3

3.00 mm

3.00mm

3.0mm

3.00 mm

3.0 mm

3(±0.02)

3.0(±0.02)

3.00(±0.02)

3.00(±0.025)

3.0(±0.025)

3.00(±0.03)

3.00(±0.04)

3.00(+0.04/-0.05)

3.0(+0.04/-0.05)

3.0(±0.05)

3.00(±0.05)

3(±0.05)

3.0(±0.1)

3.00(±0.1)

3.0~5.0

3.02(+0.04/-0.05)

3.05(±0.04)

3.1

3.10 mm

3.10(±0.03)

3.10(±0.04)

3.1(±0.1)

3.15

3.15mm

3.15 mm

3.15(±0.02)

3.17 mm

3.17 mm

3.18

3.18 mm

3.18 mm

3.18(±0.02)

3.25

3.3

3.30(±0.02)

3.40

3.48(±0.02)

3.5

3.50(±0.02)

3.61 mm

3.8mm

3.96 mm

3.96 mm

4

4.00 mm

4.00mm

4.0mm

4.00 mm

4.0 mm

4(±0.02)

4.0(±0.02)

4.00(±0.02)

4.0(±0.025)

4.00(±0.04)

4.00(±0.05)

4(±0.05)

4.0(±0.05)

4.0(±0.1)

4.00(±0.1)

4.03

4.05(±0.04)

4.05(+0.04/-0.05)

4.05(±0.1)

4.06(+0.04/-0.05)

4.1(±0.1)

4.15

4.15 mm

4.15mm

4.15 mm

4.3

4.5

4.50 mm

4.52 mm

4.60

4.70 mm

4.75 mm

4.75 mm

4.78

4.8

4.80 mm

4.90

5

5.00mm

5.0mm

5.00 mm

5.0 mm

5(±0.02)

5.0(±0.02)

5.00(±0.02)

5.0(±0.025)

5.00(±0.04)

5.00(±0.05)

5(±0.05)

5.0(±0.05)

5.0(±0.1)

5.05(±0.04)

5.05(±0.1)

5.1(±0.1)

5.15

5.15 mm

5.41 mm

5.5

5.56 mm

6

6.00mm

6.00 mm

6.0 mm

6(±0.02)

6.00(±0.02)

6.0(±0.025)

6.00(±0.04)

6.00(±0.05)

6(±0.05)

6.0(±0.05)

6.0(±0.1)

6.30(±0.04)

6.35

6.35 mm

6.35mm

6.35 mm

6.35(±0.04)

6.35(±0.05)

6.35(±0.1)

6.39(+0.04/-0.05)

6.4(±0.1)

7.00(±0.04)

7.0(±0.05)

7.05(±0.04)

7.14 mm

7.48

7.92 mm

7.93 mm

8

8.00mm

8.00 mm

8.00(±0.02)

8(±0.02)

8.0(±0.025)

8.00(±0.04)

8(±0.05)

8.0(±0.05)

9.00 mm

9.50(±0.04)

9.52 mm

9.52 mm

9.525 mm

9.53 mm

9.82

10.00 mm

10.0(±0.05)

10.4

11.00 mm

11.14

12.00 mm

12.6(±0.05)

12.70 mm

12.7 mm

12.70(±0.04)

13.0

14.5

14.53(±0.08)

15.00 mm

16.63(±0.02)

17.40(±0.08)

20.5

24.5

36.5
Clear

Pitch (for Threading)
0.2 to 0.75

Min. 0.2 mm / Max. 1 mm

Min. 0.2 mm / Max. 2 mm

0.35

0.4

0.4 to 1.25

0.5

0.50 mm

0.50 mm

0.50-3.0

0.50-3.00

0.5-1.5

0.50-1.5

0.5-1.50

0.50-1.50

0.5-1.25

0.50-1.25

0.5–1.5

0.5~3.0

0.5～3

0.7

0.75

0.75 to 1.25

0.75 to 1.25 mm

0.75 to 1.5 mm

0.75–1.5

0.8

1

1-2.00mm

1.0 to 1.5

1.0 to 1.75

1.0–2.5

(1.058)

1.25

1.25 mm

(1.270)

(1.337)

(1.411)

1.5

1.50 mm

1.5-3mm

1.5~2

1.5–2.5

(1.588)

1.75

1.75 mm

1.75-3.0

1.75-3.00

1.75-2.00

1.75～3

(1.814)

(1.954)

2

2.00 mm

(2.117)

(2.209)

(2.309)

2.5

2.50 mm

2.5–3.5

2.5–4

3

3.00 mm

(3.175)

3.5

3.50 mm

3.50-5.0

3.50-5.00

3.5~5

3.5～5　

4

4.00 mm

4–6

4.5

5

5.5

5.50 mm

5.50-6.00

6
Clear

O.D./ I.D. (For Threading)
- Outer Diameter
- Internal Diameter
- Dual Purpose
Clear

Screw Types (for threading)
- ISO Meter 60°
- unified 60°
- General Purpose 60°
- Whitworth 55°
- General Purpose 55°
- Parallel for Pipes 55°
- Taper for Pipes 55°
- For American Tube 60°
- Trapezoid 30°
- Trapezoid 29°
- England BSPT55°
Clear

Number of threads (for threading)
3TPI

4TPI

4.4TPI

4.5TPI

4.5-4

5

5TPI

6

6TPI

6 ～ 4

6～4

7

7TPI

7-5

7-4TPI

7～5

8

8TPI

≥8

9

9TPI

10

10TPI

10-8TPI

10 ～ 6

10 ～ 7

11

11TPI

11.5

11.5TPI

12

12TPI

13

13TPI

14

14TPI

14-11

14-8

14-8TPI

14 to 8

16

16TPI

16-8TPI

16 ～ 12

18

18TPI

19

19TPI

20

20TPI

24

24TPI

24-12TPI

26

27

27TPI

28

28TPI

28-14TPI

28 to 18 inches

28 to 20 inches

32

32TPI

48-20

48-16

48-8

48～8

48～16

Min. 80 / Max. 12 (inches)

Min. 80 / Max. 24 (inches)
Clear

Brand	(7) (0) BIG DAISHOWA SEIKI (0) CARMEX (0) DIJET (1) ISCAR (38) KABUSYUUKOUGU (6) KOSHUHA (0) KYOCERA (357) MITSUBISHI HITACHI TOOL (3) MITSUBISHI MATERIALS (390) NGK SPARK PLUG (5) NOGA JAPAN (0) OSG (0) SANDVIK (59) SANWA SEISAKUSYO (4) SUMITOMO ELECTRIC HARDMETAL (3) TUNGALOY (370) WIDIA (0)
CAD	2D 3D
Days to Ship	All Same day 1 Day(s) or Less 3 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less Others

1,243 items

Sort By

: 30; 60; 90

Compare

T-Max P Negative Insert For Turning (Triangular Shaped 60°)

SANDVIK

[Features]
Carbide-coated insert
Triangular-shaped insert
Negative insert
For machining general steel and low-carbon steel
For finishing

From: ฿ 339.56
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Designated Insert for JCGSSR/L

TUNGALOY

Clamp-on system without offset for cutting off

From: ฿ 387.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

80° WC With Hole ○○ Type WCGT○○○○ (R/L)【1-10 Pieces Per Package】

MITSUBISHI MATERIALS

Good cutting chip control under medium feed conditions.

From: ฿ 502.00
Days to Ship: 12 Day(s)

12 Day(s)

Compare

M-Class Insert (without Breaker) SPMN

MITSUBISHI MATERIALS

SPMN○○○, M-class insert (without chip breaker) for rough cutting of cast iron.
[Features]
· Flat top.
· Ideal for unstable cutting such as interrupted cutting thanks to high blade-tip strength and stable seating.
[Application]
· Ideal for unstable cutting such as interrupted cutting.
· Ideal for turning and rough cutting of cast iron.

From: ฿ 355.40
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G Class Insert (with F Breaker) CCGH○○○R/L-F【1-10 Pieces Per Package】

MITSUBISHI MATERIALS

Sharp cutting blade for good surface roughness

From: ฿ 557.00
Days to Ship: 11 Day(s)

11 Day(s)

Compare

G Class Insert (New Petit Cutter) BF-CNGG○○○TA4

MITSUBISHI MATERIALS

Can be used in a large variety of different applications, from small-diameter boring and general turning to face milling

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

G-Class Insert (New Petit Cut) NP-DCGW○○○○○2

MITSUBISHI MATERIALS

Usable for a wide range of applications from small diameter boring to general lathe turning and milling

From: ฿ 2,620.00
Days to Ship: 16 Day(s)

16 Day(s)

Compare

G Class Insert (New Petit Cutter) NP-TPGX○○○○○3

MITSUBISHI MATERIALS

Can be used in a large variety of different applications, from small-diameter boring and general turning to face milling

From: ฿ 2,451.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

G Class Insert (New Petit Cutter) TNP-DCGW○○○G2

MITSUBISHI MATERIALS

Can be used in a large variety of different applications, from small-diameter boring and general turning to face milling

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

G-Class Insert (Without Breaker) TNGN○○○

MITSUBISHI MATERIALS

Insert for lathe turning

From: ฿ 393.50
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G-Class Insert (Without Breaker) DNGA○○○

MITSUBISHI MATERIALS

For medium cutting

From: ฿ 789.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G-Class Insert (Without Breaker) SNGN○○○○○○

MITSUBISHI MATERIALS

For medium cutting

From: ฿ 449.73
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G Class Insert (No Breaker) SPGX○○○

MITSUBISHI MATERIALS

For medium cutting

From: ฿ 521.09
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G Class Insert (Controllable Breaker) SNGG○○○R/L

MITSUBISHI MATERIALS

Favorable Cutting Chip Control in Medium Feed Conditions

From: ฿ 489.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with FH Breaker) TNMG○○○-FH

MITSUBISHI MATERIALS

M-class insert for finish cutting of carbon steel, alloy steel, and stainless steel (with FH breaker) TNMG○○○-FH.
[Features]
- M-class double-sided chip breaker.
・Achieves stable chip control with low depth of cut and low feed.
· 60° equilateral triangle, negative insert, with hole.
· NX2525 and AP25N provide stable cutting of steel, stainless steel, and cast iron (reference for cutting conditions).
[Use]
・Finishing for turning carbon steel, alloy steel, and stainless steel.

From: ฿ 216.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with FM Breaker) DCMT○○○-FM【1-10 Pieces Per Package】

MITSUBISHI MATERIALS

Achieves reliable control even with latter-half materials that have easily elongated chips

From: ฿ 4,890.00
Days to Ship: 11 Day(s)

11 Day(s)

Compare

M-Class Insert (With LM Breaker) DCMT○○○-LM

MITSUBISHI MATERIALS

Achieves reliable control even in the latter half of passes when continuous chips tend to be produced

From: ฿ 244.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with LP Breaker) DNMG○○○-LP

MITSUBISHI MATERIALS

First recommended breaker M class insert for light cutting of carbon steel and alloy steel (with LP breaker) DNMG○○○-LP.
[Features]
- 55° rhombus, negative insert, with hole-
M-class double-sided chip breaker- Achieves
stable chip disposal in the light cutting area-
Curved cutting edge enables smooth chip discharge-
UE6105 made of steel- MC6115 for stable cutting, UE6110, MC6015, MP3025 for general cutting (guidelines for cutting conditions)
[Applications]
- For turning carbon steel and alloy steel, light cutting

From: ฿ 326.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M-Class Insert (With MA Breaker) SNMG○○○-MA

MITSUBISHI MATERIALS

Interpolation breaker M class insert for finishing and light cutting of cast iron (with MA breaker) SNMG○○○-MA.
[Features]
- 90° square, negative insert, with hole-
M-class double-sided chip breaker-
Ideal for general-purpose
areas- Positive land blade shape for excellent sharpness-
UE6105 and MC6115 are made of steel, and UC5105 and MC5005 are made of cast iron for stable cutting (
UE6110 / NX3035 / MC6015 are steel, MC7025 is stainless steel, MC5015 / UC5115 are cast iron, MP9015 is heat resistant alloy / titanium alloy, general cutting (cutting condition guideline) [
Usage]
Cast iron for turning, finishing and light cutting

From: ฿ 300.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with MH Breaker) CNMG○○○-MH

MITSUBISHI MATERIALS

Interpolation M grade insert for medium cutting of alloy steel (with MH breaker) CNMG○○○-MH.
[Features]
・M-class double-sided chip breaker
・Flatland blade type with high cutting edge strength
・Good chip control with moderate chip pocket
・80°rhombic shape, negative insert, with hole
・UE6105 is steel, US7020 is stainless steel
UE6110, MC6015, and MC6115 are steel, and UC5115 is cast iron for general cutting (guideline for cutting conditions) [
Use] -Carbon
steel. For turning alloy steel and medium cutting

From: ฿ 310.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M-Class Insert (With MM Breaker) SCMT○○○-MM

MITSUBISHI MATERIALS

Achieves thread machining with increased precision.

From: ฿ 242.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with MM Breaker) WNMG○○○○○○-MM

MITSUBISHI MATERIALS

Achieves thread machining with increased precision.

From: ฿ 198.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with SA Breaker) DNMG○○○○○○-SA

MITSUBISHI MATERIALS

M-class insert for light cutting of carbon steel and alloy steel (with SA breaker) DNMG○○○○○○-SA.
[Features]
- 55° rhombus, negative insert, with hole-
M-class double-sided chip breaker-
Excellent chip control on the low feed side within the light cutting range- Waveform
cutting edge ideal for copying and pulling-up work- Machining
Recommended for materials with a hardness of 200-300HB.
・For steel, UE6105 and MC6115 are for stable cutting.For UE6110, MC6015, and NX3035 are for general cutting (guidelines for cutting conditions).
・For steel, stainless steel, and cast iron, NX2525 is for stable cutting.
[Applications]
・Carbon steel・For turning alloy steel and light cutting

From: ฿ 326.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Positive Insert for Turning (with SW Breaker) CCMT○○○-SW

MITSUBISHI MATERIALS

Insert with wiper for turning light cutting.
[Features]
- 80° rhombus, positive, insert with wiper, with hole.
・A high-efficiency insert that maintains surface roughness even when the feed rate is increased.
・A wiper blade is installed at the connecting part of the corner radius and the straight blade.
· NX2525 and VP25N are capable of stable cutting of steel, stainless steel and cast iron (reference for cutting conditions).
[Use]
・Insert that performs rough cutting and finishing in one shot.

From: ฿ 221.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (Breaker without Code) TNMG○○○【1-10 Pieces Per Package】

MITSUBISHI MATERIALS

M-class insert for medium cutting of cast iron (no code breaker) TNMG○○○.
[Features]
・M-class double-sided chip breaker
・Flatland blade type with high cutting edge strength
・Highly versatile all-around breaker shape
・60° equilateral triangle, negative insert, with hole
・UE6105 and MC6115 are steel for stable cutting (
NX2525 for stable cutting of steel, stainless steel, and cast iron (guideline for cutting conditions) NX3035
, UE6110, MC6015, MP3025 for general cutting of steel (guidelines for cutting conditions)
UC5105, HTi05T for stable cast iron Cutting (reference for cutting condition)
・UC5115 for general cutting of cast iron (reference for cutting condition)
・HTi10 for general cutting of cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys (reference for cutting condition)
[Use]
・For turning cast iron , Ideal for medium cutting
/ For lathe turning of carbon steel / alloy steel, ideal for medium cutting

From: ฿ 200.00
Days to Ship: 12 Day(s)

12 Day(s)

Compare

M Class Insert (with Breaker without Code) VNMG○○○

MITSUBISHI MATERIALS

First recommendation for medium cutting of cast iron, alternate chipbreaker for medium cutting of carbon steel and alloy steel.
[Features]
・M-class double-sided chip breaker
・Flatland blade type for high cutting edge strength
・Highly versatile all-round breaker shape
・UE6105・MC6115 is stable with steel, NX2525 with steel, cast iron and stainless steel, UC5105 with cast iron Cutting (guideline for cutting state)
・NX3035・MC6015・UE6110・MP3025 for steel, UC5115 for cast iron, HTi10 for general cutting of cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys (guideline for cutting state)
[Use]
・Turn cast iron , For medium cutting of carbon steel and alloy steel

From: ฿ 250.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Cut Grip Multi-Functional Work Tip Series

ISCAR

With abundant types of insert widths, shapes and holders, it supports all kinds of grooving and machining.

From: ฿ 820.89
Days to Ship: 5 Day(s)

5 Day(s)

Compare

60° Triangle Negative

KYOCERA

TNGA/TNGN

From: ฿ 174.61
Days to Ship: 5 Day(s)

5 Day(s)

Compare

System Bar Diamond for Small Bores

KYOCERA

System bar for small inner diameters.

From: ฿ 6,286.50
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Turning Insert Diamond, with Hole, 35°, Negative, VNMG○○-TSF "for Finishing"

TUNGALOY

[Specifications]
· Shape: Diamond with Hole 35°
· Rake Angle: Negative
[Applications]
· Work Material: Steel, Stainless Steel, Cast Iron
· Applications: For O.D., I.D.

From: ฿ 411.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Turning Insert Diamond, with Hole, 35°, Negative, VNMG1604○○-ZF "for Finishing"

TUNGALOY

[Specifications]
· Shape: 35° Rhombus with Hole
· Rake Angle: Negative
[Applications]
· Work material: Steel, stainless steel, cast iron
· Application: Outer Diameter, Inner Diameter

From: ฿ 384.52
Days to Ship: 19 Day(s)

19 Day(s)

Compare

Turning Insert Diamond, with Hole, 35°, Positive 7°, VCMT○○-PF "for Finishing"

TUNGALOY

From: ฿ 737.00
Days to Ship: 19 Day(s)

19 Day(s)

Compare

Turning Insert Diamond, with Hole, 35°, Positive 7°, VCMT-PS "for Finishing to Intermediate Cutting"

TUNGALOY

[Specifications]
· Breaker Symbol: PS
· Shape: Diamond with Hole 35°
· Rake Angle: Positive 7°
[Applications]
· Finishing to Medium Cutting

From: ฿ 564.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Turning Insert Diamond, with Hole, 35°, Positive 7°, VCMT-PSF "for Finishing Cutting"

TUNGALOY

[Specifications]
· Breaker Symbol: PSF
· Shape: Diamond with Hole 35°
· Rake Angle: Positive 7°
[Applications]
· Finishing

From: ฿ 360.94
Days to Ship: 19 Day(s)

19 Day(s)

Compare

Turning Insert Diamond, with Hole, 55°, Positive 7°, DCMT○○-PM "for Intermediate Cutting"

TUNGALOY

[Specifications]
· Shape: 55° Rhombus with Hole
· Rake Angle: Positive 7°
[Applications]
· Work Material: Steel, Stainless Steel, Cast Iron, Heat-Resistant Alloy, Titanium Alloy
· Application: Outer Diameter, Inner Diameter

From: ฿ 331.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Turning Insert Diamond, with Hole, 80°, Negative, CNMA1906○○ "for Finishing to Intermediate Cutting"

TUNGALOY

[Specifications]
· Shape: Diamond with Hole 80°
· Rake Angle: Negative
[Applications]
· Work Material: Cast Iron
· Applications: For O.D., I.D.

From: ฿ 1,179.00
Days to Ship: 19 Day(s)

19 Day(s)

Compare

80° Diamond-Shaped Negative Insert with Hole, CNMG "for Medium Cutting"

TUNGALOY

An 80° diamond-shaped negative-type insert.
[Features]
· Includes full-circumference type breaker.
· For lathe turning
· T9100: for steel. T5100: for cast iron. NS/GT9530: for steel.
· Work material: steel, stainless steel, cast iron, heat-resistant alloys, titanium alloys.
· Applications: outer diameter, inner diameter.
[Applications]
· Ideal for medium cutting.

From: ฿ 287.45
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Equilateral Triangle 60° Positive 11° TPGT0701○○-JS-SH730 "For Small Lathe Inner Diameter"

TUNGALOY

[Specifications]
· Shape: 60° Equilateral Triangle
· Rake Angle: Positive 11°
[Applications]
· Work Material: Steel, Stainless Steel, Heat-Resistant Alloy, Titanium Alloy
· Application: Outer Diameter, Inner Diameter

From: ฿ 545.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

Triangle Insert with Hole,, 60°, Negative TNMG160404-○○

TUNGALOY

[Specifications]
· Shape: 60° Triangle with Hole
· Rake Angle: Negative
[Applications]
· Work Material: Steel, Stainless Steel, Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High Hardness Material
· Application: Outer Diameter, Inner Diameter

From: ฿ 356.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Triangle with Hole, 60° Positive 11° TPMT110○○○-○○

TUNGALOY

[Specifications]
· Shape: 60° Triangle with Hole
· Rake Angle: Positive 11°
[Applications]
· Work material: Steel, stainless steel, cast iron
· Application: Outer Diameter, Inner Diameter

From: ฿ 227.91
Days to Ship: 15 Day(s)

15 Day(s)

Compare

60° Triangle with Hole, Positive 7° TCMT-CM "Finishing to Medium Cutting"

TUNGALOY

[Specifications]
· Breaker Symbol: CM
· Shape: Triangular with Hole 60°
· Rake Angle: Positive 7°
[Applications]
· Finishing to Medium Cutting

From: ฿ 300.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"

KYOCERA

[Work materials]
· Carbon steel and alloy steel
· Stainless steel
· Gray Cast Iron and Ductile Cast Iron
· Heat-resistant alloy
[Insert Grade]
· Cermet (TN6010)
· MEGACOAT cermet (PV7010, PV7025)
· CVD coating (CA515, CA525, CA5505, CA5515, CA5525, CA5535, CA6515, CA6525)
· PVD coating (PR1125)

From: ฿ 242.44
Days to Ship: 5 Day(s)

5 Day(s)

Compare

60° Triangle Negative with Hole TNMG1604○○L/R-ST "Medium to Rough" Stainless Steel Heat-resistant Alloy

KYOCERA

[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 6
· Rake Angle: Negative
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy Cutting

From: ฿ 232.79
Days to Ship: 5 Day(s)

5 Day(s)

Compare

60° Triangle Negative with Hole TNGG16○○-S "Finishing"

KYOCERA

From: ฿ 279.83
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Small-Nega for Automatic Grid DNMU [Middle to Roughing]

KYOCERA

[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium Cutting

From: ฿ 394.11
Days to Ship: 7 Day(s)

7 Day(s)

Compare

Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed"

KYOCERA

[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium Cutting

From: ฿ 358.23
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting"

KYOCERA

From: ฿ 201.43
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-GF "for Finishing"

KYOCERA

[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Finishing

From: ฿ 483.66
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Diamond Shape 35° / Positive With Hole VBMT

KYOCERA

[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Finishing

From: ฿ 286.12
Days to Ship: 5 Day(s)

5 Day(s)

Compare

Grooving Insert (for GY Holster) GY2M○○○○N-MF

MITSUBISHI MATERIALS

GY series insert for grooving and cut-off. For multifunctional finishing.

From: ฿ 642.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

C Type Rhombus 80° / Negative with Hole / CNMG120408-MTM20 "Intermediate Cutting"

MISUMI

[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.

From: ฿ 356.00
Days to Ship: 3 Day(s)

3 Day(s)

Compare

Coated Solid T-CBN

TUNGALOY

Solid CBN Insert for Finishing to Rough Cutting

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

Diamond Shape with Hole 75° Positive 11°【1-10 Pieces Per Package】

TUNGALOY

Rhombus with Hole 75° Positive 11° EPGT "Finishing Cutting"

From: ฿ 543.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Type ○○ with RC Holes RCMX○○○-RR

MITSUBISHI MATERIALS

CBN Insert for Turning

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

Type ○○ without RN Holes RNGN○○○

MITSUBISHI MATERIALS

CBN Insert for Turning

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

E-Grade Insert (SN Breaker) VBET○○○R/LW-SN

MITSUBISHI MATERIALS

With SN breaker

From: ฿ 745.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

E-Class Insert (With SN Breaker) DCET R / L-SN

MITSUBISHI MATERIALS

DCET○○○R/L-SN, medium cutting E-class insert for automatic lathe machining (with an SN chip breaker).
[Features]
· General-purpose parallel breaker.
· Good cutting chip control under low to medium speed conditions.
· 55° two-bolt, positive insert, with holes.
· NX2525 are stable cuts of steel, stainless steel and cast iron (estimated cutting condition).
· HTi10 is generally cut with cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys (a guide for cutting conditions).
[Application]
· Insert for automatic lathe machining and medium cutting.
· E-class precision insert ideal for precision processing.

From: ฿ 557.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

E-Class Insert (SR Breaker) VBET○○○R/L-SR

MITSUBISHI MATERIALS

With SN breaker.

From: ฿ 573.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G Class Insert (with SMG Breaker) DCGT○○○M-SMG【1-10 Pieces Per Package】

MITSUBISHI MATERIALS

Outer diameter grinding type produces an excellent cutting edge and enables high precision machining

From: ฿ 8,364.00
Days to Ship: 11 Day(s)

11 Day(s)

Compare

G Class Insert (for Aluminum Tool Bit) DEGX○○○R/L

MITSUBISHI MATERIALS

Favorable Cutting Chip Control in Medium Feed Conditions

From: ฿ 1,021.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G Class Insert (for Aluminum Tool Bit) TEGX○○○

MITSUBISHI MATERIALS

Insert for turning.

From: ฿ 3,474.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G-Class Insert (New Petit Cut) NP-DNGA○○○○2

MITSUBISHI MATERIALS

Usable for a wide range of applications from small diameter boring to general lathe turning and milling

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

G Class Insert (New Petit Cutter) NP-TNGA-○○○○GA3

MITSUBISHI MATERIALS

Can be used in a large variety of different applications, from small-diameter boring and general turning to face milling

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

G Class Insert (New Petit Cutter) NP-TNGA-○○○○GA6

MITSUBISHI MATERIALS

Can be used in a large variety of different applications, from small-diameter boring and general turning to face milling

From: ฿ 4,201.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

G-Class Insert (New Petit Cut) NP-TPGB○○○○○3

MITSUBISHI MATERIALS

Usable for a wide range of applications from small diameter boring to general lathe turning and milling

From: ฿ 2,451.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

G Class Insert (No Breaker) CCGW○○○

MITSUBISHI MATERIALS

For medium cutting

From: ฿ 461.83
Days to Ship: 15 Day(s)

15 Day(s)

Compare

G-Class Insert (Without Breaker) TBGN○○○

MITSUBISHI MATERIALS

For medium cutting

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

G-Class Insert (Without Breaker) VNGA○○○

MITSUBISHI MATERIALS

Insert for lathe turning

From: ฿ 583.37
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with GH Breaker) CNMG○○○-GH

MITSUBISHI MATERIALS

First recommended M grade insert for rough cutting of cast iron (with GH breaker) CNMG○○○-GH.
[Features]
・M-class double-sided chip breaker
・Suitable for intermittent cutting and black scale cutting
・High feed possible due to combination of wide land and large chip pocket
・80° diamond shape, negative insert, with hole
・UE6105 and MC6115 are made of steel, US7020 is stainless steel, UC5105 is cast iron, stable cutting (guideline for cutting conditions)
・UE6110 is steel, UC5115 is cast iron for general cutting (guideline for cutting conditions)

From: ฿ 310.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with GH Breaker) SNMG○○○-GH

MITSUBISHI MATERIALS

First recommended chipbreaker for rough cutting of cast iron SNMG○○○-GH.
[Features]
・90° square, negative insert, with hole
・M-class double-sided chip breaker
・Suitable for intermittent cutting and black scale cutting・
High feed possible due to combination of wide land and large chip pocket
・UE6105 is steel, US7020 is stainless Steel, UC5105 for cast iron, MC6115 for stable cutting of steel and cast iron (guideline for cutting conditions)
・UE6110 for steel, UC5115 for general cutting of cast iron (guideline for cutting conditions)
[Use]
・For turning and rough cutting of cast iron

From: ฿ 310.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Positive Insert For Turning (With LM Breaker) CCMT○○○-LM

MITSUBISHI MATERIALS

[Features]
· Positive insert for lathe turning.

From: ฿ 196.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with LP Breaker) TNMG-LP

MITSUBISHI MATERIALS

First recommended breaker for light cutting of carbon steel and alloy steel TNMG-LP.
[Features]
・60° equilateral triangle, negative insert, with hole
・M-class double-sided chip breaker
・Achieves stable chip disposal in the light cutting area
・Smooth chip discharge is possible with the curved cutting edge
・UE6105 for steel・MC6115 for stable cutting, UE6110, MC6015, MP3025 for general cutting (guidelines for cutting conditions)
[Use]
・For turning carbon steel and alloy steel, light cutting

From: ฿ 250.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with LP Breaker) WNMG-LP

MITSUBISHI MATERIALS

First recommended breaker WNMG-LP for light cutting of carbon steel and alloy steel.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・M-class double-sided chip breaker
・Achieves stable chip disposal in the light cutting area
・Smooth chip discharge is possible with the curved cutting edge
・For steel, UE6105 and MC6115 are for stable cutting (cutting condition guideline), UE6110, MC6015 and MP3025 are for general cutting (cutting condition guideline)
[Use]
・For turning carbon steel and alloy steel, light cutting

From: ฿ 251.25
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with MA Breaker) DNMG○○○○○○-MA【1-10 Pieces Per Package】

MITSUBISHI MATERIALS

Interpolation M-class insert for finishing and light cutting of cast iron (with MA breaker) DNMG○○○○○○-MA.
[Features]
・M-class double-sided chip breaker
・Ideal for general-purpose areas
・Positive land blade shape for excellent sharpness
・55° rhombus, negative insert, with hole
・UE6105 is steel, US7020 is stainless steel, MC5005 and UC5105 are cast iron , Stable cutting (reference for cutting condition)
・UE6110, MC6015, MP3025, NX3035 are for general cutting with steel (reference for cutting condition)
・UC5115・MC5015 are for general cutting with cast iron (reference for cutting condition)
・MC7025 is for stainless steel General cutting (guideline for cutting conditions)
・MC6115 is for stable cutting of steel and cast iron (guideline for cutting conditions)
[Applications]
・For turning cast iron and finishing/light cutting

From: ฿ 320.00
Days to Ship: 11 Day(s)

11 Day(s)

Compare

M Class Insert (with MJ Breaker) TNMG○○○-MJ

MITSUBISHI MATERIALS

Sharp cutting blade supports light cutting to finishing of hard-to-cut materials

From: ฿ 316.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M-Class Insert (With MM Breaker) TCMT○○○-MM

MITSUBISHI MATERIALS

Achieves thread machining with increased precision.

From: ฿ 194.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with MP Breaker) WNMG○○○-MP

MITSUBISHI MATERIALS

M-class insert that achieves good chip control, low cutting heat, and high wear resistance in a wide range of areas due to its original chipbreaker shape.
[Features]
・80° equilateral unequal angle hexagon, negative insert, with hole
・Chip disposal follows fluctuations in depth of cut, feed, and cutting speed・
Greatly improves productivity
・Reduces crater wear due to low cutting heat . The temperature of the work material is also reduced
・Stable cutting of steel for UE6105・MC6115 (guideline for cutting condition)
・General cutting for MP3025・UE6110・MC6015 steel and cast iron for UC5115 (guideline for cutting condition)
[Use]
・For medium turning
・Ideal for turning
and profiling where cutting conditions such as depth of cut, feed, and cutting speed fluctuate greatly.

From: ฿ 310.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with RM Breaker) CNMG○○○-RM

MITSUBISHI MATERIALS

Achieves reliable control even with latter-half materials that have easily elongated chips

From: ฿ 300.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (New Petit Cutter) NP-TPMH○○○R/L-F

MITSUBISHI MATERIALS

Favorable Cutting Chip Control in Medium Feed Conditions

From: ฿ 2,135.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (New Petit Cutter) NP-TPMX○○○R/L-F

MITSUBISHI MATERIALS

Favorable Cutting Chip Control in Medium Feed Conditions

From: ฿ 1,924.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (No Breaker) CPMX○○○○○○

MITSUBISHI MATERIALS

For medium cutting

From: ฿ 302.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (No Breaker) SNMN

MITSUBISHI MATERIALS

M-class insert (without chipbreaker) SNMN for roughing cast iron.
[Features]
- Flat top.
· Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating.
[Use]
・Breaker for turning and rough cutting of cast iron.

From: ฿ 280.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

M Class Insert (with Breaker) VCMT○○○

MITSUBISHI MATERIALS

Achieves reliable control even with latter-half materials that have easily elongated chips

From: ฿ 505.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Insert for SBAHR Type (No Breaker) SBAT○○○L

MITSUBISHI MATERIALS

Insert for turning.

From: ฿ 1,199.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

Insert for SBAHR Type (with Breaker) SBAT○○○L-B

MITSUBISHI MATERIALS

Insert for turning.

From: ฿ 1,199.00
Days to Ship: 40 Day(s)

40 Day(s)

Compare

Insert for Outer Diameter Cutting Process (with Breaker) CSVTC○○R-B

MITSUBISHI MATERIALS

Insert for turning.

From: ฿ 999,999,999.00
Days to Ship: Quote

Quote

Compare

Grooving Insert (for GY Holster) GY2B○○○020N

MITSUBISHI MATERIALS

New 8 mm wide insert and O.D. tool holder now added to the grooving tool "GY series"

From: ฿ 510.00
Days to Ship: 15 Day(s)

15 Day(s)

Compare

Triangle with Hole, Negative Multi-Corner TNGA

TUNGALOY

CBN Insert for TAC Turning Tool for Inner/Outer Diameters

From: ฿ 2,783.00
Days to Ship: 11 Day(s)

11 Day(s)

Compare

60° Triangle Positive (No Hole) CBN

KYOCERA

TBGN/TPGN

From: ฿ 1,112.35
Days to Ship: 7 Day(s)

7 Day(s)

Compare

Negative Tip for T-Max P Turning Tool

SANDVIK

Unique shape exhibits high performance

From: ฿ 295.00
Days to Ship: 5 Day(s)

5 Day(s)


Brand
Product Series
CAD
From
Days to Ship
Shape
work material
Application
Available corners
Breaker Use
Rake angle
Nose R
Selfishly
Groove Width (For Grooving / Plunging)
Pitch (for Threading)
O.D./ I.D. (For Threading)
Screw Types (for threading)
Number of threads (for threading)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	SANDVIK	TUNGALOY	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	ISCAR	KYOCERA	KYOCERA	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	MITSUBISHI MATERIALS	MISUMI	TUNGALOY	TUNGALOY	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	MITSUBISHI MATERIALS	TUNGALOY	KYOCERA	SANDVIK
Product Series	T-Max P Negative Insert For Turning (Triangular Shaped 60°)	Designated Insert for JCGSSR/L	80° WC With Hole ○○ Type WCGT○○○○ (R/L)【1-10 Pieces Per Package】	M-Class Insert (without Breaker) SPMN	G Class Insert (with F Breaker) CCGH○○○R/L-F【1-10 Pieces Per Package】	G Class Insert (New Petit Cutter) BF-CNGG○○○TA4	G-Class Insert (New Petit Cut) NP-DCGW○○○○○2	G Class Insert (New Petit Cutter) NP-TPGX○○○○○3	G Class Insert (New Petit Cutter) TNP-DCGW○○○G2	G-Class Insert (Without Breaker) TNGN○○○	G-Class Insert (Without Breaker) DNGA○○○	G-Class Insert (Without Breaker) SNGN○○○○○○	G Class Insert (No Breaker) SPGX○○○	G Class Insert (Controllable Breaker) SNGG○○○R/L	M Class Insert (with FH Breaker) TNMG○○○-FH	M Class Insert (with FM Breaker) DCMT○○○-FM【1-10 Pieces Per Package】	M-Class Insert (With LM Breaker) DCMT○○○-LM	M Class Insert (with LP Breaker) DNMG○○○-LP	M-Class Insert (With MA Breaker) SNMG○○○-MA	M Class Insert (with MH Breaker) CNMG○○○-MH	M-Class Insert (With MM Breaker) SCMT○○○-MM	M Class Insert (with MM Breaker) WNMG○○○○○○-MM	M Class Insert (with SA Breaker) DNMG○○○○○○-SA	Positive Insert for Turning (with SW Breaker) CCMT○○○-SW	M Class Insert (Breaker without Code) TNMG○○○【1-10 Pieces Per Package】	M Class Insert (with Breaker without Code) VNMG○○○	Cut Grip Multi-Functional Work Tip Series	60° Triangle Negative	System Bar Diamond for Small Bores	Turning Insert Diamond, with Hole, 35°, Negative, VNMG○○-TSF "for Finishing"	Turning Insert Diamond, with Hole, 35°, Negative, VNMG1604○○-ZF "for Finishing"	Turning Insert Diamond, with Hole, 35°, Positive 7°, VCMT○○-PF "for Finishing"	Turning Insert Diamond, with Hole, 35°, Positive 7°, VCMT-PS "for Finishing to Intermediate Cutting"	Turning Insert Diamond, with Hole, 35°, Positive 7°, VCMT-PSF "for Finishing Cutting"	Turning Insert Diamond, with Hole, 55°, Positive 7°, DCMT○○-PM "for Intermediate Cutting"	Turning Insert Diamond, with Hole, 80°, Negative, CNMA1906○○ "for Finishing to Intermediate Cutting"	80° Diamond-Shaped Negative Insert with Hole, CNMG "for Medium Cutting"	Equilateral Triangle 60° Positive 11° TPGT0701○○-JS-SH730 "For Small Lathe Inner Diameter"	Triangle Insert with Hole,, 60°, Negative TNMG160404-○○	Triangle with Hole, 60° Positive 11° TPMT110○○○-○○	60° Triangle with Hole, Positive 7° TCMT-CM "Finishing to Medium Cutting"	Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"	60° Triangle Negative with Hole TNMG1604○○L/R-ST "Medium to Rough" Stainless Steel Heat-resistant Alloy	60° Triangle Negative with Hole TNGG16○○-S "Finishing"	Small-Nega for Automatic Grid DNMU [Middle to Roughing]	Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed"	Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting"	Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-GF "for Finishing"	Diamond Shape 35° / Positive With Hole VBMT	Grooving Insert (for GY Holster) GY2M○○○○N-MF	C Type Rhombus 80° / Negative with Hole / CNMG120408-MTM20 "Intermediate Cutting"	Coated Solid T-CBN	Diamond Shape with Hole 75° Positive 11°【1-10 Pieces Per Package】	Type ○○ with RC Holes RCMX○○○-RR	Type ○○ without RN Holes RNGN○○○	E-Grade Insert (SN Breaker) VBET○○○R/LW-SN	E-Class Insert (With SN Breaker) DCET R / L-SN	E-Class Insert (SR Breaker) VBET○○○R/L-SR	G Class Insert (with SMG Breaker) DCGT○○○M-SMG【1-10 Pieces Per Package】	G Class Insert (for Aluminum Tool Bit) DEGX○○○R/L	G Class Insert (for Aluminum Tool Bit) TEGX○○○	G-Class Insert (New Petit Cut) NP-DNGA○○○○2	G Class Insert (New Petit Cutter) NP-TNGA-○○○○GA3	G Class Insert (New Petit Cutter) NP-TNGA-○○○○GA6	G-Class Insert (New Petit Cut) NP-TPGB○○○○○3	G Class Insert (No Breaker) CCGW○○○	G-Class Insert (Without Breaker) TBGN○○○	G-Class Insert (Without Breaker) VNGA○○○	M Class Insert (with GH Breaker) CNMG○○○-GH	M Class Insert (with GH Breaker) SNMG○○○-GH	Positive Insert For Turning (With LM Breaker) CCMT○○○-LM	M Class Insert (with LP Breaker) TNMG-LP	M Class Insert (with LP Breaker) WNMG-LP	M Class Insert (with MA Breaker) DNMG○○○○○○-MA【1-10 Pieces Per Package】	M Class Insert (with MJ Breaker) TNMG○○○-MJ	M-Class Insert (With MM Breaker) TCMT○○○-MM	M Class Insert (with MP Breaker) WNMG○○○-MP	M Class Insert (with RM Breaker) CNMG○○○-RM	M Class Insert (New Petit Cutter) NP-TPMH○○○R/L-F	M Class Insert (New Petit Cutter) NP-TPMX○○○R/L-F	M Class Insert (No Breaker) CPMX○○○○○○	M Class Insert (No Breaker) SNMN	M Class Insert (with Breaker) VCMT○○○	Insert for SBAHR Type (No Breaker) SBAT○○○L	Insert for SBAHR Type (with Breaker) SBAT○○○L-B	Insert for Outer Diameter Cutting Process (with Breaker) CSVTC○○R-B	Grooving Insert (for GY Holster) GY2B○○○020N	Triangle with Hole, Negative Multi-Corner TNGA	60° Triangle Positive (No Hole) CBN	Negative Tip for T-Max P Turning Tool
CAD
From	฿ 339.56	฿ 387.00	฿ 502.00	฿ 355.40	฿ 557.00	฿ 999,999,999.00	฿ 2,620.00	฿ 2,451.00	฿ 999,999,999.00	฿ 393.50	฿ 789.00	฿ 449.73	฿ 521.09	฿ 489.00	฿ 216.00	฿ 4,890.00	฿ 244.00	฿ 326.00	฿ 300.00	฿ 310.00	฿ 242.00	฿ 198.00	฿ 326.00	฿ 221.00	฿ 200.00	฿ 250.00	฿ 820.89	฿ 174.61	฿ 6,286.50	฿ 411.00	฿ 384.52	฿ 737.00	฿ 564.00	฿ 360.94	฿ 331.00	฿ 1,179.00	฿ 287.45	฿ 545.00	฿ 356.00	฿ 227.91	฿ 300.00	฿ 242.44	฿ 232.79	฿ 279.83	฿ 394.11	฿ 358.23	฿ 201.43	฿ 483.66	฿ 286.12	฿ 642.00	฿ 356.00	฿ 999,999,999.00	฿ 543.00	฿ 999,999,999.00	฿ 999,999,999.00	฿ 745.00	฿ 557.00	฿ 573.00	฿ 8,364.00	฿ 1,021.00	฿ 3,474.00	฿ 999,999,999.00	฿ 999,999,999.00	฿ 4,201.00	฿ 2,451.00	฿ 461.83	฿ 999,999,999.00	฿ 583.37	฿ 310.00	฿ 310.00	฿ 196.00	฿ 250.00	฿ 251.25	฿ 320.00	฿ 316.00	฿ 194.00	฿ 310.00	฿ 300.00	฿ 2,135.00	฿ 1,924.00	฿ 302.00	฿ 280.00	฿ 505.00	฿ 1,199.00	฿ 1,199.00	฿ 999,999,999.00	฿ 510.00	฿ 2,783.00	฿ 1,112.35	฿ 295.00
Days to Ship	5 Day(s)	15 Day(s)	12 Day(s)	15 Day(s)	11 Day(s)	Quote	16 Day(s)	40 Day(s)	Quote	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	11 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	12 Day(s)	15 Day(s)	5 Day(s)	5 Day(s)	5 Day(s)	15 Day(s)	19 Day(s)	19 Day(s)	15 Day(s)	19 Day(s)	15 Day(s)	19 Day(s)	15 Day(s)	40 Day(s)	15 Day(s)	15 Day(s)	40 Day(s)	5 Day(s)	5 Day(s)	5 Day(s)	7 Day(s)	5 Day(s)	5 Day(s)	5 Day(s)	5 Day(s)	15 Day(s)	3 Day(s)	Quote	15 Day(s)	Quote	Quote	15 Day(s)	15 Day(s)	15 Day(s)	11 Day(s)	15 Day(s)	15 Day(s)	Quote	Quote	40 Day(s)	40 Day(s)	15 Day(s)	Quote	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	11 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	15 Day(s)	40 Day(s)	40 Day(s)	Quote	15 Day(s)	11 Day(s)	7 Day(s)	5 Day(s)
Shape	T (Triangle)	Other	T (Triangle)	S (Rectangular)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	S (Rectangular)	T (Triangle)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	C (80° Diamond-Shape)	S (Rectangular)	W (Hexagonal Type)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	Other	T (Triangle)	Other	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	C (80° Diamond-Shape) / V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	-	C (80° Diamond-Shape)	C (80° Diamond-Shape) / R (Circular) / S (Rectangular) / T (Triangle)	Other	R (Circular)	R (Circular)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	T (Triangle)	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	S (Rectangular)	C (80° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	W (Hexagonal Type)	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	S (Rectangular)	V (35° Diamond-Shaped)	Other	Other	C (80° Diamond-Shape)	Other	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)
work material	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	High Hardness Material	Steel / Cast Iron / Non-ferrous metal / High Hardness Material	High Hardness Material	High Hardness Material	Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Stainless Steel	Steel	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Cast Iron / High Hardness Material	Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel	Steel	Steel	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron	Cast Iron	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron	Stainless Steel	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Stainless Steel	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel	Cast Iron	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Non-ferrous metal	Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	High Hardness Material	High Hardness Material	Steel / Heat-resistant alloy, titanium alloy / High Hardness Material	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel	Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel / Cast Iron	Stainless Steel / Heat-resistant alloy, titanium alloy	Steel	Steel	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Steel	Stainless Steel	Cast Iron	Cast Iron / Non-ferrous metal	Steel / Stainless Steel / Cast Iron	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	-	Steel / Heat-resistant alloy, titanium alloy	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	High Hardness Material	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material
Application	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter	Outer Diameter/Inner Diameter
Available corners	3	-	-	-	-	4	2	3	2	1	-	-	1	-	-	-	-	-	-	-	-	-	-	-	-	-	2	-	1	-	-	-	2	2	2	4	4	-	6	-	3	4	6	6	4	2	2	2	2	-	4	4 / 6 / 8 / 9 or more	2	-	-	-	-	-	-	-	1	2	3	3	3	-	-	1	-	-	-	-	-	-	-	-	-	-	1	1	-	-	-	-	-	-	-	3 / 6	1 / 3	2
Breaker Use	Finish / Medium grinding	-	Finish	Medium grinding	Finish	-	-	-	-	-	-	-	-	Medium grinding	Finish	Finish	-	Light Cutting	Medium grinding	Medium grinding	Medium grinding	Medium grinding	Light Cutting	-	Medium grinding	Medium grinding	-	-	-	Finish	Finish	-	Finish / Medium grinding	Finish	Medium grinding	Medium grinding	Finish / Medium grinding	-	Medium grinding	-	Medium grinding	Medium to deep grinding	Medium to deep grinding	Finish	Medium grinding	Medium grinding	Medium grinding	Finish	Finish / Medium grinding	-	Medium grinding	Finish	Finish	Heavy cutting	-	Medium grinding	Medium grinding	Medium grinding	Medium grinding	Medium grinding	-	-	-	-	-	-	-	-	Rough cutting	Rough cutting	-	Light Cutting	Light Cutting	Medium grinding	-	Medium grinding	Medium grinding	-	-	-	Medium grinding	-	Medium grinding	-	-	-	-	-	-	Finish / Medium grinding
Rake angle	Negative	-	Pozidriv	Pozidriv	Pozidriv	Negative	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Negative	Negative	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Negative	Negative	Pozidriv	Negative	Negative	-	Negative	Pozidriv	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Pozidriv	Negative	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	-	Negative	Negative	Pozidriv	Pozidriv	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Negative	Negative	Negative	Negative	Pozidriv	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Negative	Pozidriv	-	-	Negative	-	Negative	Pozidriv	Negative
Nose R	0.2 ～ Other	-	0.2 ～ 0.4	0.4 ～ 1.2	0.2 ～ 0.4	0.4 ～ 1.2	0.2 ～ 0.8	0.2 ～ 0.8	0.4 ～ 0.8	0.4 ～ 1.6	0.4 ～ 0.8	0.4 ～ 1.6	0.4 ～ 0.8	0.4 ～ 0.8	0.2 ～ 0.8	0.2 ～ 0.8	0.4 ～ 0.8	0.4 ～ 1.2	0.4 ～ 1.6	0.4 ～ 1.6	0.4 ～ 0.8	0.8 ～ 1.2	0.4 ～ 1.2	0.2 ～ 0.4	0.4 ～ Other	0.4 ～ 1.2	0.2 ～ Other	0.4 ～ 1.2	0.2	-	-	-	-	-	-	-	-	-	-	-	-	0.4 ～ 1.6	0.4 ～ 0.8	0.2 ～ 0.8	0.2 ～ 0.4	0.2 ～ Other	0.4 ～ 0.8	Other	0.2 ～ 1.2	0.2 ～ Other	0.8	-	-	-	-	-	0.2 ～ 0.4	0.2 ～ 0.4	0.2 ～ 0.4	0.2 ～ 0.4	0.2 ～ 0.4	0.4 ～ 1.2	0.2 ～ 1.2	1.2	0.2 ～ 0.8	-	0.4 ～ 0.8	0.4 ～ 0.8	0.8 ～ 1.6	0.8 ～ 1.6	0.4 ～ 0.8	0.4 ～ 1.2	0.4 ～ 1.2	0.4 ～ 1.2	0.4 ～ 1.2	0.4 ～ 1.2	0.4 ～ 1.6	0.8 ～ 1.6	0.2 ～ 0.4	0.2 ～ 0.8	0.4 ～ 0.8	0.8 ～ 1.2	0.4 ～ 1.2	-	-	-	0.2	-	0.2 ～ 0.8	0.4 ～ Other
Selfishly	Right-hand / No-hand	No-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	-	-	No-hand	-	No-hand	-	-	No-hand	Right-hand / Left-hand	-	-	-	-	-	-	-	-	-	-	-	-	No-hand	No-hand	Right-hand	No-hand	No-hand	-	No-hand	No-hand	No-hand	No-hand	No-hand	No-hand	Right-hand / No-hand	-	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	No-hand	No-hand	-	No-hand	No-hand	Right-hand / Left-hand	-	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	No-hand	-	No-hand	No-hand	No-hand	-	No-hand	-	-	-	-	-	-	-	-	-	-	-	Right-hand / Left-hand	Right-hand / Left-hand	-	-	-	Left-hand	Right-hand	Right-hand	-	-	No-hand	No-hand
Groove Width (For Grooving / Plunging)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1.57(±0.02) ～ 6(±0.02)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pitch (for Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
O.D./ I.D. (For Threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Outer Diameter	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Internal Diameter	Internal Diameter	-	-	-	-	-
Screw Types (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of threads (for threading)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-