(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Interface Terminal Blocks (Round/Y Terminal Types)（Connector：FCN Connector）

The interface terminal block (round / spade terminal type) is a component for wiring connections that combines a connector and a small circuit board terminal block. It is mainly used to connect a PLC, etc., and to reduce the size of the control panel. There are two types of crimp terminals: a basic round type and a Y type that can be removed simply by loosening the screws. The connector types are divided into MIL, FCN, MR, Centronics, etc. Terminal block screws include M3, M3.5, etc. The mounting method can be selected from direct mounting and mounting on a DIN rail. Since the terminal pitch, compatible devices, and representative standards differ depending on the product, it is necessary to select an appropriate interface terminal block (round / spade terminal type) according to the application. There are also support screw type products that can keep the screws loosened, and products that allow you to select a name plate.

Configure

Specification/Dimensions

Connector
- MIL Connector
- FCN Connector
- MR connector
- D-sub connector
- Centronics Connector
- MDR connector
- Other
Clear

Number of Poles(Pole)
4

8

10

15

16

20

24

25

26

32

34

36

37

40

50

68

96
Clear

Mounting Method
- Direct attachment
- With DIN rail
- DIN rail/Direct attachment
- Other
Clear

Supported equipment manufacturer
- Mitsubishi Electric
- Omron
- YASKAWA ELECTRIC
- Panasonic Electronic Works
- KEYENCE
Clear

Pitch Between Terminals(mm)
2.5

3.5

5

5.08

7

7.3

7.62

8.5
Clear

Supported equipment
- PLC
- Servo Motor
- I/O board
- Other
Clear

Dimension width(mm)
31.5

40

42

46

48

52

55

57

63

64.4

65

67.5

70

72.5

74

76

77

79

80

81.7

86

89.5

94

95

96

96.5

98.5

100

101

101.21

102

105

108

109

112.5

113

113.5

125

128

129

130.7

131

132

135

138.5

139.31

140

145.5

146

147

149

150

151.7

157.5

158.4

160

162

171

180

180.5

181

184

185

186.7

200

203

219.55

223

247.5
Clear

Terminal Block Screw
- M3
- M3.5
- Other
Clear

Representative Standard
- CE
- UL
- CUL
- TUV
- CSA
Clear

Dimension vertical(mm)
22.6

27.1

27.3

31.1

31.6

32

33.4

35

36.5

38.1

38.3

40

40.5

41.3

41.5

41.6

42

42.8

43

43.3

43.5

43.8

44.3

45

47

48.35

48.5

49

50.7

53

55

59

64

64.3

86
Clear

Dimension depth(mm)
35.5

36

36.5

36.8

39

40

40.5

42

42.3

42.4

42.5

43

45

47

47.6

48

50

51

52.5

55

56

60

85

144

151
Clear

Brand	(6) (0) IDEC (0) IO LINK (0) OMRON (1) PANASONIC (0) PATLITE (KASUGA) (2) TOYOGIKEN (2) WAGO (1) YOSHIDADENKI (1)
Filter By	All Sale Items
CAD	2D 3D
Days to Ship	All Same day 2 Day(s) or Less 3 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less Others

13 items

Sort By

: 30; 60; 90

Compare

Until 31/03/2025

Terminal Block, PCN Series

TOYOGIKEN

[Features]
·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.
· Boasts an even slimmer finish.
· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
· The terminal number and connector number are wired 1-to-1.
· Circuits can be freely designed.
·Workability is further improved by adopting a new screw method.
·If you use a fork type terminal, the PCN series is definitely advantageous.
· A lever type which enables neat and tidy removal from rails.
· No tools required for removal, and so no need for wasted space on the backside of the main body.
· Compatible with both rail mounting and direct mounting.
·Equipped with support screw (dedicated Y-shaped crimp terminal).
·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.
·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

From: ฿ 1,308.33
Special Price
Days to Ship: 2 Day(s)

2 Day(s)

Compare

Until 31/03/2025

Terminal Block, PCN7 Series

TOYOGIKEN

An ultra compact size with a terminal pitch of just 7 mm. Ideal for downsizing PLC or SBC interfaces. Compact size to contribute to downsizing of control panels.
[Features]
· Materialized ultra compact size with 7 mm of inter-terminal pitch.
· Ideal for downsizing PLC or SBC interfaces.
· Compact size to contribute to downsizing of control panels.
· The connector and terminal block are easy-to-handle 1:1 wire connection types.
· Adopts SS terminal screws for easy connection works.
· Captive structure of screws to prevent loss of screws.
· Terminal cover is an open/close type and is pre-equipped with a name plate featuring the terminal number printed on both sides to streamline wiring.
· Compatible with both DNI rail mounting and direct mounting methods.
· Carries support screws (dedicated for Y-shaped crimp terminals).
· Terminal screws have a captive structure and a floating washer to save man hour in connection works.
· Mount on an IEC 35 mm rail uses lever method, easily attachable/detachable and needs no tool.

From: ฿ 1,467.48
Special Price
Days to Ship: Same day

Same day

Compare

PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL

MISUMI

A spring-loaded terminal block that can be directly connected to the circuit of a Mitsubishi Electric PLC. It is an input/output PLC connector terminal block allowing lower stage wiring without upper stage terminal wiring getting in the way.

From: ฿ 887.04
Days to Ship: Same day

Same day

Compare

PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g

MISUMI

This is a PLC connector terminal block compatible with Mitsubishi Electric PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

From: ฿ 1,188.00
Days to Ship: Same day

Same day

Compare

Connector Terminal Block Conversion Unit XW2R (for general purpose use)

Until 31/03/2025

Connector Terminal Block Conversion Unit XW2R (for general purpose use)

OMRON

[Features]
· A general purpose type connector terminal block conversion unit that can be used for saving on the amount of wiring required in a variety of measures.

From: ฿ 1,891.00
Special Price
Days to Ship: 5 Day(s)

5 Day(s)

Compare

IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels

WAGO

A module that converts an FCN connector into a terminal block.
[Features]
·Converts the half-pitch MDR connector used as standard in servo amplifiers to a terminal block.
·Simple one-to-one circuit. Wide cable connection range from 0.08 to 1.5 or 2.5 mm2.
·Connector is MIL, FCN (AMP)··Industry standard.
·3.5 mm pitch and 5 mm pitch terminal blocks··Wide lineup.
·KEYENCE PLC CPU "-KV" is also available··Lineup added.
·Features a cage clamp connection that is strong against vibration··Improved reliability.
[Applications]
·Ideal for when soldering work is difficult and troublesome for connecting the FCN connector and electric cable.
·Ideal for prototyping and experimental applications when you want to convert the input/output signals of KEYENCE PLC to a terminal block.

From: ฿ 2,086.08
Days to Ship: 5 Day(s)

5 Day(s)

Compare

MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount

MISUMI

A terminal block equipped with an FCN 40-core connector that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

From: ฿ 979.93
Days to Ship: Same day

Same day

Compare

PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount

MISUMI

This is a PLC connector terminal block for output compatible with OMRON PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

From: ฿ 1,188.00
Days to Ship: 3 Day(s)

3 Day(s)

Compare

Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

Until 31/03/2025

Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

PATLITE (KASUGA)

Uses M3 screws and boasts the smallest pitch in the industry and just 7 mm. Designed to help improve space saving measures, even when compared with the TIFA7 series.

[Features]
· A slim type from the TIFA series. Available with different numbers of poles.
· A product series designed for improved space saving measured. Compared with the TIFA7 series, the amount of space required for installation has been reduced by approximately 12%.
· As well as self-up screw types, types which use a fall prevention screw structure that ensures the screws will not fall off, even if the terminal block is turned upside down, are also available.
· The KASUGA interface terminal block is available in a number of variations for use in different applications.

From: ฿ 1,583.55
Special Price
Days to Ship: Same day

Same day

Compare

+com PLC connector terminal block (for Mitsubishi Electric input/output)

MISUMI

[New Product] 8 pole + 32 PLC signal common terminal block incorporated into a 40 pole terminal block

From: ฿ 1,071.68
Days to Ship: 3 Day(s)

3 Day(s)

Compare

MWI Series (Terminal Pitch 7 mm), Compatible Equipment: PLC

MISUMI

This is a terminal block equipped with a Centronics connector that supports both DIN rail mounting and screw mounting, allowing lower stage wiring without upper stage terminal wiring getting in the way.

From: ฿ 1,250.32
Days to Ship: Same day

Same day

Compare

PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)

YOSHIDADENKI

A space saving 7.62 mm pitch FCN connector type terminal block.

From: ฿ 1,863.18
Days to Ship: Same day

Same day

Compare

Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series

Until 31/03/2025

Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series

PATLITE (KASUGA)

Y-shaped / round crimp terminal insertion type of maintenance-free interface terminal block.
[Features]
· Series that applies the connection method of clutch lock (screw-free type) terminal blocks. Round / Y-shaped crimp terminals (for M3, M3.5) that are used generally in Japan can be used as usual.
· Epoch-making interface terminal block that needs no dedicated tool newly ready, and can connect cables through their simple insertion after crimp without modification.
· Wire marker sleeve is no longer likely to shift from terminal block part since insertion port has a structure to securely retain the sleeve.
· Free from maintenance needing no secondary tightening and torque management unlike screw type to contribute to remarkable shortening of wiring work time and deliver “safety” and “free-of-anxiety.”
· Y-shaped product can cable by clutch lock (screw-free type) with which connection completes with simple wire insertion into a round terminal.
· Needs no other dedicated tool than screwdriver, and can remarkably shorten wiring work time by simple replacement of a screw-type terminal block.
· Clutch lock type T terminal and circular terminal parts as compact as 5-mm pitch to achieve space saving.
· Crimp terminal connection method also prevents loss of wire number that is a problem of screw-free terminal blocks.
· Includes a release button and a conduction check hole.
[Applications]
· Ideal for replacement of a screw-type terminal block.

From: ฿ 2,183.20
Special Price
Days to Ship: Same day

Same day


Brand
Product Series
CAD
From
Days to Ship
Specifications
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025
Brand	TOYOGIKEN	TOYOGIKEN	MISUMI	MISUMI	OMRON	WAGO	MISUMI	MISUMI	PATLITE (KASUGA)	MISUMI	MISUMI	YOSHIDADENKI	PATLITE (KASUGA)
Product Series	Terminal Block, PCN Series	Terminal Block, PCN7 Series	PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL	PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g	Connector Terminal Block Conversion Unit XW2R (for general purpose use)	IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels	MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount	PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount	Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch	+com PLC connector terminal block (for Mitsubishi Electric input/output)	MWI Series (Terminal Pitch 7 mm), Compatible Equipment: PLC	PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)	Interface Terminal Block (Crimp Terminal Insertion Type), TIFY Series
CAD		2D	2D					2D	2D	2D			2D
From	฿ 1,308.33 Special Price On Sale Until 31/03/2025	฿ 1,467.48 Special Price On Sale Until 31/03/2025	฿ 887.04	฿ 1,188.00	฿ 1,891.00 Special Price On Sale Until 31/03/2025	฿ 2,086.08	฿ 979.93	฿ 1,188.00	฿ 1,583.55 Special Price On Sale Until 31/03/2025	฿ 1,071.68	฿ 1,250.32	฿ 1,863.18	฿ 2,183.20 Special Price On Sale Until 31/03/2025
Days to Ship	2 Day(s)	Same day	Same day	Same day	5 Day(s)	5 Day(s)	Same day	3 Day(s)	Same day	3 Day(s)	Same day	Same day	Same day
Specifications
Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector
Number of Poles(Pole)	40	40	40	40	40	40	40	40	40	40	40	40	40
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	Other	With DIN rail	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment
Supported equipment manufacturer	Mitsubishi Electric / Omron	Mitsubishi Electric / Omron	Mitsubishi Electric	Mitsubishi Electric	-	-	Mitsubishi Electric / Omron	Omron	Mitsubishi Electric / Omron / KEYENCE	Mitsubishi Electric	-	Mitsubishi Electric / Omron	Mitsubishi Electric / Omron / KEYENCE
Pitch Between Terminals(mm)	7.62	7	7	7	7	3.5	7	7	7	7	7	7.62	5
Supported equipment	Other	PLC	PLC	PLC	-	-	PLC	PLC	Other	PLC	PLC	PLC	Other
Dimension width(mm)	162	128 ～ 149	125	129	151.7	77	146	129	150	125	150	101.21	105
Terminal Block Screw	M3	M3	M3	M3	Other	-	M3	M3	M3	M3	M3	M3	-
Representative Standard	UL / CUL / TUV	UL / CUL / TUV	-	-	-	-	-	-	CE	-	-	UL / CSA	CE
Dimension vertical(mm)	40	40	42	42	48.35	22.6	42	42	40	42	41.5	64	59
Dimension depth(mm)	36	36	51	42.4	50	55	51	42.4	42.3	51	42.5	48	42