(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
· ball end mill for high-precision finishing that
focuses on machined surface precision, and a new coating "DUROREY" coating for
high-hardness steel that is excellent even for work materials over 60 HRC.
Demonstrates chipping resistance and enables longer tool life.
AE-BD-H
1 Variable negative spiral gash
• Controls chipping with larger negative angle at tip of cutting edge.
• While securing cutting quality by making the negative angle weaker near the outer periphery, chipping resistance is enhanced in combination
with the weaker helix angle specification.
2 Thickness at the center
• Thickening of the center core to prevent deformation of the ball tip and improve control of chipping.
3 Superior ball R precision
• Secures stable R accuracy across 180°.
4 Superior shank accuracy
• Supports h4 tolerance (0/-0.004).
5 Ideal for shrink fit holders
• Lineup of short-shank type suitable for shrink fit holders are also available.
6 Smooth Surface Treatment
• Improves surface accuracy by smoothening the coating surface.
Long Tool Life
Exhibitts superior endurance in high-hardness steel milling
High-speed Milling
Enables stable machining even in high-speed milling of STAVAX (53 HRC)
EDP No. | RE × LU | Short Shank | LF | APMX | LH | DCON | DN | θk | Effective length by inclined angles (Le) *Note 1 | Type | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.5° | 1° | 1.5° | 2° | 3° | ||||||||||
3042001 | R0.5 × 2 | - | 50 | 0.8 | 7.7 | 4 | 0.95 | 11.71° | 2.14 | 2.2 | 2.26 | 2.33 | 2.48 | 1 |
3042002 | R0.75 × 3 | - | 50 | 1.2 | 7.9 | 4 | 1.45 | 10.03° | 3.17 | 3.25 | 3.34 | 3.44 | 3.66 | |
3042003 | R1 × 4 | - | 50 | 1.6 | 12 | 6 | 1.95 | 10.64° | 4.19 | 4.3 | 4.42 | 4.55 | 4.85 | |
3042004 | R1.5 × 6 | - | 60 | 2.4 | 11.9 | 6 | 2.85 | 8.15° | 6.44 | 6.61 | 6.79 | 7 | 7.45 | |
3042005 | R2 × 8-4 | - | 60 | 3.2 | - | 4 | 3.85 | - | - | - | - | - | - | 2 |
3042006 | R2 × 8 | - | 70 | 12.1 | 6 | 5.65° | 8.49 | 8.71 | 8.96 | 9.22 | 9.81 | 1 | ||
3042007 | R2 × 8-S | ◯ | 45 | |||||||||||
3042008 | R2.5 × 10 | - | 80 | 4 | 12.2 | 6 | 4.8 | 2.92° | 10.63 | 10.9 | 11.22 | 11.55 | - | |
3042009 | R2.5 × 10-S | ◯ | 50 | |||||||||||
3042010 | R3 × 18 | - | 90 | 9 | - | 6 | 5.8 | - | - | - | - | - | - | 2 |
3042011 | R3 × 18-S | ◯ | 55 | |||||||||||
3042012 | R4 × 24 | - | 100 | 12 | - | 8 | 7.7 | - | - | - | - | - | - | |
3042013 | R4 × 24-S | ◯ | 75 | |||||||||||
3042014 | R5 × 30 | - | 100 | 15 | - | 10 | 9.7 | - | - | - | - | - | - | |
3042015 | R5 × 30-S | ◯ | 75 | |||||||||||
3042016 | R6 × 36 | - | 110 | 18 | - | 12 | 11.7 | - | - | - | - | - | - | |
3042017 | R6 × 36-S | ◯ | 80 |
*Note 1: If there is no value in the actual effective length (Le column) for the work gradient angle α, it indicates no interference.
Cutting Condition
Finishing
The machining path is on condition of contouring line operation.
Work Material | Tool Steel • Hardened Steel Prehardened Steel SKD11• SKD61• NAK80 (Approximately 45HRC) | Hardened Steel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
~55HRC | ~62HRC | ~66HRC | ~70HRC | |||||||
RE | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) |
R0.5 | 38,400 | 2,350 | 38,400 | 2,350 | 38,400 | 2,000 | 38,400 | 1,600 | 38,400 | 1,450 |
R0.75 | 38,400 | 3,050 | 38,400 | 3,050 | 38,400 | 2,500 | 31,800 | 1,900 | 25,200 | 1,450 |
R1 | 38,400 | 3,600 | 38,400 | 3,550 | 28,800 | 2,200 | 24,000 | 1,750 | 19,200 | 1,250 |
R1.5 | 31,800 | 4,000 | 25,200 | 3,200 | 19,200 | 2,000 | 16,200 | 1,600 | 12,600 | 1,200 |
R2 | 24,000 | 3,650 | 19,200 | 2,950 | 14,400 | 1,900 | 11,900 | 1,500 | 9,500 | 1,150 |
R2.5 | 19,200 | 3,500 | 15,000 | 2,650 | 11,500 | 1,700 | 9,500 | 1,350 | 7,600 | 1,000 |
R3 | 16,200 | 3,350 | 12,600 | 2,300 | 9,500 | 1,550 | 8,000 | 1,250 | 6,400 | 955 |
R4 | 11,900 | 2,850 | 9,500 | 2,050 | 7,100 | 1,350 | 5,900 | 1,050 | 4,800 | 830 |
R5 | 9,500 | 2,550 | 7,600 | 1,800 | 5,800 | 1,150 | 4,800 | 875 | 3,800 | 700 |
R6 | 8,000 | 2,400 | 6,400 | 1,650 | 4,800 | 955 | 4,000 | 795 | 3,200 | 635 |
High-Speed Finishing
Caution: Sparks generated during operation or heat caused by tool breakage can cause fire.
Be sure to use all proper re-prevention measures.
The conditions below are for high speed / high precision machining centers
The machining path is on condition of contouring line operation.
Work Material | Tool Steel • Hardened Steel Prehardened Steel SKD11• SKD61• NAK80 (Approximately 45HRC) | Hardened Steel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
~55HRC | ~62HRC | ~66HRC | ~70HRC | |||||||
RE | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) | Speed (min-1) | Feed (mm/min) |
R0.5 | 50,000 | 3,700 | 50,000 | 3,700 | 50,000 | 3,100 | 50,000 | 2,600 | 50,000 | 2,400 |
R0.75 | 50,000 | 4,800 | 50,000 | 4,800 | 50,000 | 3,900 | 50,000 | 3,050 | 38,400 | 2,300 |
R1 | 50,000 | 5,600 | 50,000 | 5,350 | 48,000 | 3,650 | 38,400 | 2,800 | 28,800 | 2,100 |
R1.5 | 49,800 | 6,200 | 38,400 | 4,800 | 31,800 | 3,350 | 25,200 | 2,550 | 19,200 | 1,900 |
R2 | 37,200 | 5,700 | 28,800 | 4,400 | 24,000 | 3,200 | 19,200 | 2,400 | 14,400 | 1,800 |
R2.5 | 30,000 | 5,450 | 22,800 | 4,000 | 19,200 | 2,850 | 15,600 | 2,150 | 11,500 | 1,600 |
R3 | 24,600 | 5,200 | 19,200 | 3,450 | 16,200 | 2,550 | 12,600 | 2,050 | 9,500 | 1,550 |
R4 | 18,600 | 4,450 | 14,400 | 3,050 | 11,900 | 2,250 | 9,500 | 1,800 | 7,100 | 1,350 |
R5 | 15,000 | 3,950 | 11,500 | 2,650 | 9,500 | 1,900 | 7,600 | 1,550 | 5,800 | 1,150 |
R6 | 12,600 | 3,700 | 9,500 | 2,500 | 8,000 | 1,600 | 6,400 | 1,350 | 4,800 | 995 |
1. Use a rigid and precise machine and holder.
2. Using air blow or MQL (oil mist coolant) is recommended.
3. The above condition shows an approximate standard for contouring operation (side milling) with a low machining load. If abnormal cutting sounds, vibration
or chattering occur depending on the machining shape, cutting amount, rigidity of the machine or work holding condition, etc., please adjust the speed,
feed and the depth of cut.
4. Cutting speed and feed rate can be increased in case of lower depth of cut.
Part Number |
---|
AE-BD-H-R0.5X2 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Blade length (ℓ) (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | Tool No. | Ball Radius (mm) | Neck Diameter (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 766.00 | CARBIDE END MILL | 1 Piece(s) | Available | Same day | 10 | 15 | 100 | 10 | 3042014 | 5 | 9.7 |
Loading...
Type | Bore | work material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Machining Application | Curved Surface / Side Surface / Carving / R-Groove |
Please check the type/dimensions/specifications of the part AE-BD-H-R0.5X2 in the Ball End Type, 2-Flute for High Precision Finishing AE-BD-H series.
Part Number |
---|
AE-BD-H-R0.75X3 |
AE-BD-H-R1.5X6 |
AE-BD-H-R1X4 |
AE-BD-H-R2.5X10 |
AE-BD-H-R2.5X10-S |
AE-BD-H-R2X8 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | RoHS | Blade length (ℓ) (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | Tool No. | Ball Radius (mm) | Neck Diameter (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|
฿ 842.00 | 1 Piece(s) | 5 Day(s) | - | 1.2 | 50 | 4 | 3042002 | 0.75 | 1.45 | ||
฿ 819.00 | 1 Piece(s) | Available | Same day | 10 | 18 | 110 | 12 | 3042016 | 6 | 11.7 | |
฿ 691.00 | 1 Piece(s) | Same day | 10 | 2.4 | 50 | 6 | 3042004 | 1.5 | 2.85 | ||
฿ 1,027.00 | 1 Piece(s) | Same day | - | 9 | 90 | 6 | 3042010 | 3 | 5.8 | ||
฿ 874.00 | 1 Piece(s) | 5 Day(s) | - | 9 | 55 | 6 | 3042011 | 3 | 5.8 | ||
฿ 1,104.00 | 1 Piece(s) | Same day | 10 | 3.2 | 60 | 6 | 3042006 | 2 | 3.85 |
How can we improve?
How can we improve?