GT Diamond Cutter
Brand :
ARC GREATTOOL
Caution
- Match the arrow with the rotational direction of the power tool. Check that there are no bends, cracks or chips on the product. Check that there is no rattling or wobbling after attaching the product. Check that there are no abnormal sounds or vibrations by turning the disk without any load after attaching. If you notice any abnormal sounds or vibrations during work, stop work immediately. Cannot be used for metals, woodwork or for polishing flat surfaces. Use at or below the maximum rotational speed of 14,500 min-1. If there is clogging or the sharpness has deteriorated, sharpen the product using soft materials such as a GC-type grind stone or brick.
Product Description
[Features]
Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
[Applications]
· Concrete, bricks, block, mortar, etc.