(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
· Outputs signals received from bridge type sensors such as load cells, pressure sensors and strain gauges, as a current (4 to 20 mA).
· Can be easily mounted to DIN rails or walls.
· Small, thin and lightweight; making it easy to install
· Calibration can be performed using volume control or correction switch methods
· A wide zero adjustment range (±0.5 mV/V) and span adjustment range (0.4 to 3.2 mV/V) allow it to support a variety of bridge type sensors.
· Uses spring clamp terminals that make wiring easy and crimp terminals unnecessary
Main applications | Weighing instruments | External dimension (W)(mm) | 45 | External dimensions (D)(mm) | 24 |
---|---|---|---|---|---|
External dimensions (H)(mm) | 122 | Weight(kg) | Approx. 0.09 | Power Supply | 24 V DC, current consumption 100 mA max. (approx. 2.4 W) |
Operating temperature and humidity range | -5 to +50°C, 85% RH or less (no condensation) | Accessory | Flathead screwdriver for terminal block operation × 1, instruction manual × 1 | Supplement | Input range: ±3.2 mV/V, zero adjustment range: ±0.5 mV/V, span adjustment range: 0.4 to 3.2 mV/V, nonlinearity: 0.05% of F.S. typ., load cell power supply: 5 V DC 60 mA max. (load cell 1 × 120 Ω type, or up to 4 × 350 Ω type can be used), zero point temperature coefficient: 2 μV/°C typ., span temperature coefficient: 200 ppm/°C typ., frequency characteristics: DC up to approx. 2 Hz (-3 dB), response time: approx. 190 ms (0%→90%), input conversion noise: 2 μVp-p typ. (in 0.1 to 10 Hz band), calibration value: 1 mV/V ±0.2% typ, voltage output (AD-4541-V): ±2 V (load resistance 2 kΩ or more), current output (AD-4541-I): 4 to 20 mA (load resistance 250 Ω or less), storage temperature range: -20 to +70°C, terminals: spring clamp type conforming wire stranded cable 0.08 to 1.5 mm² / AWG 28-14, maximum sheath diameter ø3.4 mm, mounting method: DIN rail mounting or screw mounting, unit material: PBT (flame-retardant V0, black with glass fiber), isolation: between input/output and power supply, withstand voltage: 500 V DC 1 minute |
Please check the type/dimensions/specifications of the part AD-4541-I in the AD-4541-I Ultra Compact Analog Signal Conditioner series.
How can we improve?
How can we improve?