(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน พฤษภาคม 2567 | Notice holiday in May 2024 > คลิก
My Components
Similar Products
Product DetailCarbide Bound Plug Gauge H7 (for machining)
NGS LIMIT PLUG GAUGE
Click this image to zoom it.
Move the mouse over or click the image to zoom
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- ฿ 7,340.87/Unit
-
- Qty :
-
-
- Days to Ship :
- ---
-
- Total Price :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
Highly economical carbide alloy plug gauge that has excellent durability and resistance to thermal expansion.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Excellent abrasion resistance, lasting approximately 20 to 30 times longer than steel.
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· High hardness eliminates worries about scratching the surface.
· Gauge management is easy. The periodic gauge inspection interval is lengthened, making it economical.
· Includes an inspection results chart.
[Applications]
· Used for hole diameter inspections.
What is limit plug gauge
Instructions for use
- GOGO side ( can pass through the whole holes smoothly)
The GO side is used to check if the diameter of the hole which is bigger than the
maximum entity size【minimum tolerable size of the hole】, the gauge can go
through the hole completely. - NO-GO side (can not pass through the hole)
The NO-GO side is used to check if the diameter of the hole is smaller than the minimum
entity size【maximum tolerable size of the hole】, the gauge can notgo into the hole.
| What is entity size The volume of hole is the minimum when the hole is finished with minimum tolerable size. Therefore, the other volume except the hole (this is entity size, the right drawing with slanted portion) is the maximum, that is the maximum entity size. The opposite meaning of above mention is the minimum entity size. |  |
- Grade / same with the tolerance of the hole, plug gauge also has H6~H10.
The smaller the number the more precise it is. - Hardness / HV600~780
| Vickers hardness (HV): | Press the square pyramid shape diamond indenter against the surface of the material to do indentation hardness test. |
Precautions before use
| Precaution after use
|
Example for use
| Part Number |
|---|
| TLP28-H7 |
| Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Nominal | Mass (g) |
|---|---|---|---|---|---|---|---|
฿ 21,078.32 | NGS LIMIT PLUG GAUGE | 1 Piece(s) | 45 Day(s) | φ28 | 352 |
Loading...
Basic Information
| Product Model | Limit Plug Gauge | Material | Gauge Part: Cemented Carbide, Shank Part: Aluminum | Features | · A pair of gauges with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Features exceptional abrasion resistance and the service life is about 20 to 30 times that of steel, making the unit durable and economical. · There is little impact from temperature, as thermal expansion coefficients are small. · No need to worry about scratching of the surface due to a high degree of hardness. · Gauge management is easy. |
|---|---|---|---|---|---|
| Use | Hole Diameter Inspection |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?