(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Micrometer to be mounted to micrometer stands, etc., useful for measuring objects such as small items and screening inspection.
[Features]
· Spindle of the micrometer head is fixed (set to reference value) and values on the dial gauge are read for comparison setting.
· Material: frame: spheroidal black steel cast iron, spindle: high carbon chromium bearing steel.
· Equipped with constant pressure device.
· The frame has a painted finish.
· Measurement surface has a carbide tip.
[Applications]
· For screening inspection of parts.
• Standard micro meter For outside measurement. | • U shape steel plate micro meter For measuring steel plate thickness. |
• Spline micro meter To conveniently measure groove of spline shaft. | • Disk micro meter Disk shape gauge head is perfect for measuring root tangent length of gears. |
• Blade micro meter Measuring surface is blade type, perfect for measuring groove diameter of shaft,etc. | • Spherical face micro meter Anvil side of gauge head is spherical shape, perfect for measuring wall thickness of pipe. |
• Point micro meter Perfect for measuring the thickness of frill's web, etc. |
• Examples of reading graduation | |
*Usaually, the left picture's reading value up to 0.01mm, lower picture's reading value measure with eyes up to 0.001 (1μm). | |
Reading value for sleeve is 7.0mm, reading value for thimble is 0.37mm and measured value is 7.37mm. |
01 Cleaning measuring surface To keep the measuring surface of anvil and spindle clean, gently clip a clean paper between the two measuring surfaces, then let loose of the spindle to remove the paper. *Dust is easily attracted to certain types of paper, do not force the paper out. | ||
02 Turning ratchet To adjust measuring pressure is very important. Idling turn the ratchet stopper 1~3 times. | ||
03 Correcting clamp In the picture, graduation of 0 has about 5μm deviation and it needs to be corrected. Clamp is used to set spindle into correct location. | ||
04 Put in key-spanner The sleeve on the back of the clamp has a hole. Put key-spanner into the hole and adjust to 0. If spanner is not correctly put in, it will loosen the spanner and break graduation, please be careful. | ||
05 0 position This is on the accurate 0 positions. When reading graduation, eyes should look directly at graduation. 2~3μm error will occur if it's not read directly. | ||
06 Confirm accuracy (Use micro meter stand) *Due to turn by screw , error will occur on screw's pitch, needs to make sure it's on 0 position. Hold micro meter with micro meter stand. | ||
07 Confirm accuracy (Clip block gauge on) To click block gauge on, make sure dimension and block gauge and graduation on micro meter is the same. | ||
Part Number |
---|
MC204-25DG |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship |
---|---|---|---|---|---|
฿ 8,100.66 | NGS MICROMETER | 1 Piece(s) | 45 Day(s) |
Loading...
Type | Special Micrometer | Display Method | Analog | Maximum Measuring Length (Adjustment Range)(mm) | 16 ~ 25 |
---|---|---|---|---|---|
Waterproof Function | Not Included | With / Without Measurement Data Output Terminal | Not Included | Measuring Range(mm) | Micrometer Head: 0-25, Dial Gauge: 0-10 |
Minimum Scale(mm) | 0.01 | Mass(g) | 545 | Maximum Permissible Error (Micrometer Head Part)(µm) | 4 |
Maximum Permissible Error (Dial Indicator Part)(µm) | ±14 | Material | · Frame: Spherical Graphite Cast Iron, Spindle: High Carbon Chromium Bearing Steel; Dial Gauge: Steel | Feature 1 | · Spindle of the micrometer head is fixed (set to reference value) and values on the dial gauge are read for comparison setting. |
Use | · Suitable for screening inspection of parts |
Please check the type/dimensions/specifications of the part MC204-25DG in the Micrometer with Dial Gauge series.
How can we improve?
How can we improve?