Square Glass Plate
Caution
Product Description
Glass plate that can be ordered in a variety of dimensions from 1 plate.
[Features]
· Excellent heat and impact resistance, swells very little when heated, and exhibits excellent heat and shock resistance in a wide variety of fields.
· Glass plate that has the properties of high optical transparency and low optical distortion.
Glass Plate With Excellent Heat And Shock Resistance
· Excellent heat and shock resistance and low heat expansion, so it exhibits excellent heat and shock resistance in every field.
· Sheet with material for experiments that has the properties of high optical transparency and low optical distortion.
· Maximum operating temperature: TEMPAX/490°C
· Normal operating temperature: TEMPAX/230°C
· Cut tolerance: Outer dimensions ± 0.5 mm (standard product)
· End face: Chamfered finish
Specifications Table
Cuttable Dimensions (□<50 mm)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.1 |
| Width (W) | 1 to 50 | ||
| Length (L) |
*There may be cases where cutting is not possible due to the combination of the width and length.
Cuttable dimensions (□50 mm or more)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.2 |
| Width (W) | 50 to 300 | ||
| Length (L) |
*There may be cases where cutting is not possible due to the combination of the width and length.
Cuttable dimensions (<ø50 mm)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.1 |
| Outer Diameter (ø) | 1 to 50 |
*There may be cases where cutting is not possible due to the combination of the width and length.
Cuttable dimensions (ø50 mm or more)
(Unit: mm)
| Specified Range | Specified Unit | Dimensional Precision | |
|---|---|---|---|
| Plate Thickness (T) | 1 to 10 | 0.1 | ±0.2 |
| Outer Diameter (ø) | 50 to 300 |
*There may be cases where cutting is not possible due to the combination of the width and length.