IBOY Square Bottle
Brand :
AS ONE
Caution
Product Description
Resin container (square bottle) made of polyethylene.
[Features]
· Does not leak, even without a gasket (no inside stopper).
· Has passed the liquid leak test.
· Graduated.
Leak-Proof Square Bottle Container With No Seal
Material: Main unit/lid: PE (polyethylene)
Heat resistant temperature: 110°C
Size Chart Of IBOY Square Bottle
| Part No. | Capacity | A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|
| 5-003-01 | 50 mL | 78 | 20 | 55 |
| 5-003-02 | 100 mL | 94 | 20 | 70 |
| 5-003-03 | 250 mL | 118 | 22 | 93 |
| 5-003-04 | 500 mL | 141 | 22 | 116 |
| 5-003-05 | 1 L | 170 | 22 | 146 |
| 5-003-51 | 50 mL | 78 | 20 | 55 |
| 5-003-52 | 100 mL | 94 | 20 | 70 |
| 5-003-53 | 250 mL | 118 | 22 | 93 |
| 5-003-54 | 500 mL | 141 | 22 | 116 |
| 5-003-55 | 1 L | 170 | 22 | 146 |
Dimensional Outline Drawing Of IBOY Square Bottle 5-003-01 to 05
<-01>
<-02>
<-03>
<-04>
<-05>
Measurement Standard
| Product | Product Weight g | Screw Thread Diameter mm | Opening Inside Diameter mm | Lower Ring Diameter mm | Body Diameter mm | Bottle Overall Height mm | Full Water Capacity ml | |
|---|---|---|---|---|---|---|---|---|
| Wide-Mouth Bottle | 50 mL | 9.0 ± 1.0 | 33.0 ± 0.25 | 24.9 ± 0.20 | 34.0 ± 0.25 | 40.0 ± 0.6 | 75.0 ± 0.6 | 70 ± 3.0 |
| 100 mL | 12.0 ± 1.5 | 33.0 ± 0.25 | 24.9 ± 0.20 | 34.0 ± 0.25 | 47.0 ± 0.7 | 96.0 ± 0.7 | 128 ± 5.0 | |
| 250 mL | 26.0 ± 2.0 | 43.6 ± 0.30 | 32.0 ± 0.25 | 44.5 ± 0.30 | 62.0 ± 0.8 | 128.0 ± 0.7 | 305 ± 10.0 | |
| 500 mL | 45.0 ± 3.5 | 54.6 ± 0.30 | 41.9 ± 0.30 | 55.5 ± 0.30 | 76.0 ± 1.0 | 160.0 ± 0.8 | 595 ± 15.0 | |
| 1,000 mL | 70.0 ± 5.0 | 60.6 ± 0.40 | 47.8 ± 0.35 | 61.5 ± 0.40 | 92.0 ± 1.5 | 196.0 ± 1.5 | 1,090 ± 20.0 | |
| 2,000 mL | 140.0 ± 1.0 | 83.6 ± 0.40 | 65.0 ± 0.40 | 84.0 ± 0.50 | 120.0 ± 2.0 | 240.0 ± 3.0 | 2300 ± 50.0 | |
| Narrow-Mouth Bottle | 50 mL | 6.5 ± 0.8 | 20.5 ± 0.25 | 11.0 ± 0.20 | 21.1 ± 0.25 | 40.0 ± 0.6 | 72.0 ± 0.6 | 62 ± 3.0 |
| 100 mL | 14.0 ± 1.5 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 47.0 ± 0.7 | 96.0 ± 0.7 | 118 ± 5.0 | |
| 250 mL | 22.0 ± 2.0 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 62.0 ± 0.8 | 129.0 ± 0.7 | 290 ± 10.0 | |
| 500 mL | 42.0 ± 3.5 | 33.0 ± 0.25 | 20.0 ± 0.20 | 33.8 ± 0.25 | 76.0 ± 1.0 | 165.0 ± 0.8 | 565 ± 15.0 | |
| 1,000 mL | 70.0 ± 5.0 | 33.0 ± 0.25 | 20.0 ± 0.20 | 34.0 ± 0.25 | 92.0 ± 1.5 | 202.0 ± 1.5 | 1,080 ± 20.0 | |
| Square Bottle | 50 mL | 13.5 ± 1.5 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 35.5 ± 0.6 | 75.0 ± 0.6 | 59 ± 3.0 |
| 100 mL | 15.5 ± 1.5 | 27.0 ± 0.25 | 16.0 ± 0.20 | 27.8 ± 0.25 | 42.0 ± 0.7 | 90.0 ± 0.6 | 110 ± 5.0 | |
| 250 mL | 30.0 ± 2.5 | 43.6 ± 0.30 | 32.0 ± 0.25 | 44.5 ± 0.30 | 58.5 ± 0.8 | 114.0 ± 0.7 | 290 ± 10.0 | |
| 500 mL | 64.0 ± 5.0 | 54.6 ± 0.35 | 41.5 ± 0.35 | 55.5 ± 0.35 | 72.0 ± 1.0 | 138.0 ± 1.0 | 580 ± 15.0 | |
| 1,000 mL | 97.8 ± 7.0 | 60.6 ± 0.40 | 48.0 ± 0.40 | 61.5 ± 0.40 | 90.0 ± 1.5 | 167.0 ± 1.5 | 1130 ± 20.0 |
*The dimensional values of the diameter are averages of the parting and right angle directions
*Wide-mouth 2‑L bottles tentatively follow the standard
Leakage Standard
Load the fixed amount of water, tighten the cap with a tightening torque for each product shown in the table below.
Leave it alone upside down, and there should be no leaks reaching the screw threads after 12 hours.
| Wide-Mouth Bottle | Narrow-Mouth Bottle | Square Bottle | |
|---|---|---|---|
| 50 mL | 15 kg.cm | 10 kg.cm | 15 kg.cm |
| 100 mL | 15 kg.cm | 15 kg.cm | 15 kg.cm |
| 250 mL | 20 kg.cm | 20 kg.cm | 20 kg.cm |
| 500 mL | 30 kg.cm | 20 kg.cm | 25 kg.cm |
| 1,000 mL | 40 kg.cm | 25 kg.cm | 30 kg.cm |
| 2,000 mL | 40 kg.cm |