Digital Indicator (Configuration Results / Configuration Certificate / Traceability Flow Chart Included)
Brand :
NIIGATA SEIKI (SK)
Caution
Product Description
[Features]
· The digital display is easy to see.
· With hold function.
· Equipped with auto off function (after about 5 minutes).
· Digital indicator with scale intervals of 0.01 mm and measurement range of 12.7 mm.
· Comes with two back covers, a flat type and a type with lug.
What is dial gauge
Gauge head uses cogwheel to spin around, then utilize the movement
of pointer to present measuring result's comparison measuring instrument.
of pointer to present measuring result's comparison measuring instrument.
• Parts of dial gauge
What's comparison measuring instrument
Unlike the direct measuring value reading of varnier caliper and micro
meter ,which needs to be compared with other standards to get the
reading value and measuring error.
Comparison measuring instrument must have a comparison standard.
meter ,which needs to be compared with other standards to get the
reading value and measuring error.
Comparison measuring instrument must have a comparison standard.
Standardize methods of using
Usually not to use alone, should be used with holding device to
hold on stem. Most of the base is magnetic base, measuring
error will occur while using stem and arm, however, it will have
accurate measurement by looking at measuring variation.
It's a very convenient tool to use.
In the working place, we need direct measuring
value reading and measuring of parallelism, flatness,
and core degree. Dial gauge would be the
most convenient tool to use.
hold on stem. Most of the base is magnetic base, measuring
error will occur while using stem and arm, however, it will have
accurate measurement by looking at measuring variation.
It's a very convenient tool to use.
In the working place, we need direct measuring
value reading and measuring of parallelism, flatness,
and core degree. Dial gauge would be the
most convenient tool to use.
Using exampleFine adjustment device
if the megnetic base is with fine adjustment device,
it would easy to set on.
Types of Dial gauge
Standard type
Gauge head and spindle can be moved up and down.
Lever type
Use the principle of leverage to expand the move of gauge head, it's
also called dial indicator. The gauge head is small and the angle can
be changed freely, it's convenient for small space measurement.
also called dial indicator. The gauge head is small and the angle can
be changed freely, it's convenient for small space measurement.
Long stroke type
Long dial gauge with wider measuring area.
Examples of using Dial gauge
 |  | Holdng position Dial gauge can not be correctly used only from fixing the jig.
|
| 01 Usedial gauge to measure cylinder foundness of lathe processing. | 02 To measure concave and convex of end surface. |
Examples of using Dial indicator
 |  |  |
| 01 To measure the vise on lathe. | 02-1 During process of lathe, set the workpiece on scroll chuck, then measure the deformation of cylinder surface. | 02-2 To measure the inner core degree. |
 | 03 Convenience of perform measurement of narrower groove surface or to make measurement that's more precise than dial gauge. The more parallel of the gauge head and measuring surface, the more it will be measured accurately. To measure the inner core degree. *Inaccuracy will occur if magneticbase doesn't have fine adjustment device or is place at a inconvenient location. | ! Gauge head should be parallel with measuring surface and right angle with measuring direction. |
 |