Ball End and L-Wrench Set Long (Standard: Inch)
Caution
Product Description
A wrench with a ball point that can turn bolts from a 25 degrees angle.
[Features]
· The product is designed so that the gap between the wrench and the bolt is 0.0127 mm, so it is very difficult to lick and can be used for a long time.
· The ball end can be continuously turned without damaging the wrench or bolt even at an angle of 25 degrees.
· There is no need to worry about the wrench falling apart with a holder having fall prevention function.
· If you turn the bolt while holding the wrench in the holder, you can apply torque withless force.
· When removing the wrench from the holder, twist it a little and the lock will be released for easy installation.
· The unique Bondhus steel material "Protanium Alloy Steel" has achieved a strength 20% or more higher than general steel materials.
[Application]
· Used for tightening hex bolts and nuts.
Features
●Protonium? alloy steel with tensile strength is used as the material steel.●ProGuard processingTM: it has corrosion resistance five times that of ordinary black dye processing.
●You can turn the screw from the angle of 25° maximum.
●With a patent holder that can be reused.
●The hardness is HRC57-61.