Ball End and L-Wrench Set Long (Standard: Metric)
Caution
Product Description
[Features]
· Designed so that the gap between the wrench and bolt is 0.0127 mm, very difficult to be stripped and can be used for a long time.
· The developed ball end can be continuously turned without damaging the wrench and bolt even at an angle of 25 degrees.
· There is no need to worry about the wrench falling apart with a holder having fall prevention function.
· If you turn the bolt while holding the wrench in the holder, you can apply torque with less force.
·Whenremoving the wrench from the holder, twisting the wrench a little and the lock will be unlocked for easy removal.
· "Protanium steel alloy" Bondhus steel specially formulated for hex key achieves a strength 20% or higher than that of general steel.
[Application]
· Used for tightening hex bolts and nuts.
Features
●ProGuard processingTM: it has corrosion resistance five times that of ordinary black dye processing.●You can turn the screw from the angle of 25° maximum.
●The hardness is HRC57 to 61.
Specification
●Set Contents（mm）:1.5, 2, 2.5, 3, 4, 5●Set Contents（piece）:6
●SPQ（set）:1