Submersible Pump, Underwater High-Spin Pump For Low Water Level Drainage, LSR Type

[Features]
· Able to pump as long as there is at least 10 mm of water at the bottom of the pump, and can operate continuously with as little as 5 mm.
· No priming required.
· Uses a high spin impeller made of water-resistant urethane rubber three times more wear-resistant than FCD, which can process sand and mud with reduced risk of locking.
· Even if the bottom strainer becomes clogged, the pump can still collect water from the side slits through the movement of the rubber bellows.
· The bottom is made from a single piece of synthetic rubber, from the pump casing to the stand. Ideal for FRP tanks, etc.
[Applications]
· For draining small amounts of water.
· Draining puddles or residual water at general construction sites.
· Draining residual water at the bottom of manholes, pits, and collection tanks.