(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Replacing the anvil enables 1 micrometer to be used for a wide range of measurement work.
[Features]
· With only a single unit, the measurement range can be widened by exchanging the anvil.
· With constant pressure device and carbide tip on measurement surface.
· The frame has a painted finish.
[Applications]
· For extensive measurement.
![]() | ![]() |
• Standard micro meter For outside measurement. | • U shape steel plate micro meter For measuring steel plate thickness. |
![]() | ![]() |
• Spline micro meter To conveniently measure groove of spline shaft. | • Disk micro meter Disk shape gauge head is perfect for measuring root tangent length of gears. |
![]() | ![]() |
• Blade micro meter Measuring surface is blade type, perfect for measuring groove diameter of shaft,etc. | • Spherical face micro meter Anvil side of gauge head is spherical shape, perfect for measuring wall thickness of pipe. |
![]() | • Point micro meter Perfect for measuring the thickness of frill's web, etc. |
• Examples of reading graduation | |
![]() | *Usaually, the left picture's reading value up to 0.01mm, lower picture's reading value measure with eyes up to 0.001 (1μm). |
![]() | |
Reading value for sleeve is 7.0mm, reading value for thimble is 0.37mm and measured value is 7.37mm. |
![]() | 01 Cleaning measuring surface To keep the measuring surface of anvil and spindle clean, gently clip a clean paper between the two measuring surfaces, then let loose of the spindle to remove the paper. *Dust is easily attracted to certain types of paper, do not force the paper out. | |
![]() | 02 Turning ratchet To adjust measuring pressure is very important. Idling turn the ratchet stopper 1~3 times. | |
![]() | 03 Correcting clamp In the picture, graduation of 0 has about 5μm deviation and it needs to be corrected. Clamp is used to set spindle into correct location. | |
![]() | ||
![]() | 04 Put in key-spanner The sleeve on the back of the clamp has a hole. Put key-spanner into the hole and adjust to 0. If spanner is not correctly put in, it will loosen the spanner and break graduation, please be careful. | |
![]() | 05 0 position This is on the accurate 0 positions. When reading graduation, eyes should look directly at graduation. 2~3μm error will occur if it's not read directly. | |
![]() | 06 Confirm accuracy (Use micro meter stand) *Due to turn by screw , error will occur on screw's pitch, needs to make sure it's on 0 position. Hold micro meter with micro meter stand. | |
![]() | 07 Confirm accuracy (Clip block gauge on) To click block gauge on, make sure dimension and block gauge and graduation on micro meter is the same. | |
![]() |
Part Number |
---|
MC1064-200 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Maximum Measuring Length (Adjustment Range) (mm) | Measuring Range (mm) | A (mm) | B (mm) | Maximum Permissible Error (µm) | Reference Bar |
---|---|---|---|---|---|---|---|---|---|---|---|
฿ 15,227.88 | NGS MICROMETER | 1 Piece(s) | 45 Day(s) | 101 ~ 200 | 100–200 | 208 | 116 | 7 | 4 Pieces (100, 125, 150, and 175 mm) |
Loading...
Type | Special Micrometer | Display Method | Analog | Waterproof Function | Not Included |
---|---|---|---|---|---|
With / Without Measurement Data Output Terminal | Not Included | C(mm) | 8 | D(mm) | 18 |
Specifications | Spare Anvil: 4 pcs / Micrometer Head Stroke: 25 mm | Minimum Reading(mm) | 0.01 |
Please check the type/dimensions/specifications of the part MC1064-200 in the Outer Micrometer, Replaceable Anvil Type series.
Part Number |
---|
MC1064-100 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | Maximum Measuring Length (Adjustment Range) (mm) | Measuring Range (mm) | A (mm) | B (mm) | Maximum Permissible Error (µm) | Reference Bar |
---|---|---|---|---|---|---|---|---|---|---|
฿ 8,890.96 | 1 Piece(s) | 45 Day(s) | 51 ~ 100 | 0–100 | 107 | 59 | 5 | Three pcs (25, 50, 75 mm) |
How can we improve?
How can we improve?