(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
A micrometer with an easy-to-see digital display.
[Features]
· Measurement surface has a carbide tip.
· Equipped with constant pressure device.
· Equipped with auto display off function. (Approximately 6 minutes)
· With heatproof cover. (Excluding MCD130-125 and MCD130-150)
· The frame has a painted finish.
· With spherical attachment. (SR2.5)
· Includes 1 reference rod. (Excluding MCD130-25)
[Applications]
· Used for measurement of external dimensions.
![]() | ![]() |
• Standard micro meter For outside measurement. | • U shape steel plate micro meter For measuring steel plate thickness. |
![]() | ![]() |
• Spline micro meter To conveniently measure groove of spline shaft. | • Disk micro meter Disk shape gauge head is perfect for measuring root tangent length of gears. |
![]() | ![]() |
• Blade micro meter Measuring surface is blade type, perfect for measuring groove diameter of shaft,etc. | • Spherical face micro meter Anvil side of gauge head is spherical shape, perfect for measuring wall thickness of pipe. |
![]() | • Point micro meter Perfect for measuring the thickness of frill's web, etc. |
• Examples of reading graduation | |
![]() | *Usaually, the left picture's reading value up to 0.01mm, lower picture's reading value measure with eyes up to 0.001 (1μm). |
![]() | |
Reading value for sleeve is 7.0mm, reading value for thimble is 0.37mm and measured value is 7.37mm. |
![]() | 01 Cleaning measuring surface To keep the measuring surface of anvil and spindle clean, gently clip a clean paper between the two measuring surfaces, then let loose of the spindle to remove the paper. *Dust is easily attracted to certain types of paper, do not force the paper out. | |
![]() | 02 Turning ratchet To adjust measuring pressure is very important. Idling turn the ratchet stopper 1~3 times. | |
![]() | 03 Correcting clamp In the picture, graduation of 0 has about 5μm deviation and it needs to be corrected. Clamp is used to set spindle into correct location. | |
![]() | ||
![]() | 04 Put in key-spanner The sleeve on the back of the clamp has a hole. Put key-spanner into the hole and adjust to 0. If spanner is not correctly put in, it will loosen the spanner and break graduation, please be careful. | |
![]() | 05 0 position This is on the accurate 0 positions. When reading graduation, eyes should look directly at graduation. 2~3μm error will occur if it's not read directly. | |
![]() | 06 Confirm accuracy (Use micro meter stand) *Due to turn by screw , error will occur on screw's pitch, needs to make sure it's on 0 position. Hold micro meter with micro meter stand. | |
![]() | 07 Confirm accuracy (Clip block gauge on) To click block gauge on, make sure dimension and block gauge and graduation on micro meter is the same. | |
![]() |
Part Number |
---|
MCD130-100 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Measuring Range (mm) | A (mm) | B (mm) |
---|---|---|---|---|---|---|---|---|
฿ 6,436.00 | NGS MICROMETER | 1 Piece(s) | 45 Day(s) | 75~100 | 103 | 51 |
Loading...
Type | Standard Micrometer | Display Method | Digital | Maximum Measuring Length (Adjustment Range)(mm) | 51 ~ 100 |
---|---|---|---|---|---|
Waterproof Function | Not Included | With / Without Measurement Data Output Terminal | Not Included | C(mm) | 6.5 |
D(mm) | 18 | Maximum Permissible Error(µm) | 6 | Power Supply | SR44 (Oxidized Silver Battery) 1 Attachment for Tests |
Minimum Reading(mm) | 0.001 |
Please check the type/dimensions/specifications of the part MCD130-100 in the Digital Exterior Micrometer series.
Part Number |
---|
MCD130-75 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | Measuring Range (mm) | A (mm) | B (mm) |
---|---|---|---|---|---|---|---|
฿ 5,783.05 | 1 Piece(s) | 1 Day(s) | 50~75 | 78 | 43 |
How can we improve?
How can we improve?