(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Set of 6 standard outer micrometers from 0 to 150 mm convenient for collective management.
[Features]
· Heat-proof specifications help prevent transfer of worker's body temperature.
· In a dedicated wooden box for convenient storage.
· Includes 5 reference rods. (Excluding MC105-25)
· Measurement surface has a carbide tip.
· Equipped with constant pressure device.
· The frame has a painted finish.
[Applications]
· Can be used for measurement of external dimensions.
• Standard micro meter For outside measurement. | • U shape steel plate micro meter For measuring steel plate thickness. |
• Spline micro meter To conveniently measure groove of spline shaft. | • Disk micro meter Disk shape gauge head is perfect for measuring root tangent length of gears. |
• Blade micro meter Measuring surface is blade type, perfect for measuring groove diameter of shaft,etc. | • Spherical face micro meter Anvil side of gauge head is spherical shape, perfect for measuring wall thickness of pipe. |
• Point micro meter Perfect for measuring the thickness of frill's web, etc. |
• Examples of reading graduation | |
*Usaually, the left picture's reading value up to 0.01mm, lower picture's reading value measure with eyes up to 0.001 (1μm). | |
Reading value for sleeve is 7.0mm, reading value for thimble is 0.37mm and measured value is 7.37mm. |
01 Cleaning measuring surface To keep the measuring surface of anvil and spindle clean, gently clip a clean paper between the two measuring surfaces, then let loose of the spindle to remove the paper. *Dust is easily attracted to certain types of paper, do not force the paper out. | ||
02 Turning ratchet To adjust measuring pressure is very important. Idling turn the ratchet stopper 1~3 times. | ||
03 Correcting clamp In the picture, graduation of 0 has about 5μm deviation and it needs to be corrected. Clamp is used to set spindle into correct location. | ||
04 Put in key-spanner The sleeve on the back of the clamp has a hole. Put key-spanner into the hole and adjust to 0. If spanner is not correctly put in, it will loosen the spanner and break graduation, please be careful. | ||
05 0 position This is on the accurate 0 positions. When reading graduation, eyes should look directly at graduation. 2~3μm error will occur if it's not read directly. | ||
06 Confirm accuracy (Use micro meter stand) *Due to turn by screw , error will occur on screw's pitch, needs to make sure it's on 0 position. Hold micro meter with micro meter stand. | ||
07 Confirm accuracy (Clip block gauge on) To click block gauge on, make sure dimension and block gauge and graduation on micro meter is the same. | ||
Part Number |
---|
MC105-150ST |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship |
---|---|---|---|---|---|
฿ 19,757.93 | NGS MICROMETER | 1 Piece(s) | 45 Day(s) |
Loading...
Type | Standard Micrometer | Display Method | Analog | Maximum Measuring Length (Adjustment Range)(mm) | 101 ~ 200 |
---|---|---|---|---|---|
Waterproof Function | Not Included | With / Without Measurement Data Output Terminal | Not Included | Measuring Range(mm) | 0–150 |
Stem Shape | Stem w/ Nut, w/ Clamp | Overall length L(mm) | 121 | Minimum Scale(mm) | 0.01 |
Maximum Tolerance(µm) | 3 | Mass(g) | 120 | Constant Pressure Device | Available |
Tip shape | Plane | Spindle(mm) | φ6.5×27 | Stem(mm) | φ10×15 |
Nut Diameter(mm) | 14×4 | Thimble Diameter(mm) | 18 | Maximum Permissible Error(µm) | 4–6 |
Outside Micrometer | 0-25, 25-50, 50-75, 75-100, 100-125, 125-150 (6 units) | Reference Bar | 25,50,75,100,125 (5 Units) | Minimum Reading(mm) | 0.01 |
Please check the type/dimensions/specifications of the part MC105-150ST in the Standard Outer Micrometer Set series.
How can we improve?
How can we improve?