LA6-POE
Caution
Product Description
Easy wiring with PoE
The color of the light can be freely configured
[Features]
· Can be installed with little wiring using a PoE power supply, even where electrical work is difficult.
· Use 21 colors to flexibly display the state of teh network.
· IP54 construction means it is dust and splash proof (stationary type is IP20), and so can be used in factories with large amounts of moisture and dust.
Signal Tower LA6 Series Catalog Click here
LA6-POE Stacked Information Indicator Specifications
| [Protection rating]
[Compliant standards]
|
Product Specifications
Features
PoE power supply allows installation with reduced wiring even in locations where electrical work is difficult.
Supports HTTP and Modbus/TCP socket communication.
Detailed settings of the device, including the IP address, can be configured via a web browser.
Status can be freely displayed in 21 colors.
Dustproof and waterproof IP54 structure (IP20 for the stationary type) allows use in factories with a lot of moisture or dust.
A variety of "operation modes" make the progress visible.
Equipped with an operation program, it can display time information such as "takt time" and "time count."The simple "dedicated data creation application software" makes the progress visible.
The editing software allows you to freely set the "light emission color" and "operation mode."Color: 9 colors in signal light mode/21 colors in smart mode.
Glove: Polycarbonate resin with excellent impact resistance and heat resistance
|
|
|
|
Operation Steps
|
Communication Commands
|
Product Specifications
Model | LA6-5DTNWB-POE (direct connection type) | LA6-5DSNWB-POE (stationary type) | ||
|---|---|---|---|---|
Rated voltage | - | DC24V | ||
Power over Ethernet (PoE) | DC48V | |||
Voltage Tolerance | - | DC24V ±10% | ||
Power over Ethernet (PoE) | DC36-57V | |||
Rated current consumption | standard | 0.30A (at DC24V input) 0.18A (at PoE: DC48V input) | ||
maximum | 0.49A (at DC26.4V input) 0.26A (PoE: at DC48V input) | |||
Rated power consumption | standard | 7.2W (DC24V input) 8.6W (PoE: DC48V input) | ||
maximum | 12.9W (at DC26.4V input) 12.5W (PoE: at DC48V input) | |||
Signal Line Current | 420mA/70mA (DC26.4 input) 10mA (PoE: DC48V input) | |||
Ambient temperature | -10℃～+50℃ | |||
Ambient humidity | 90% RH or less, no freezing or condensation | |||
Storage ambient temperature | -10℃～+50℃ | |||
Storage ambient humidity | 90% RH or less, no freezing or condensation | |||
Installation location | indoor | |||
Mounting Direction | Positive direction | |||
Protection rating | - | IP54 (IEC 60529) | IP20 (IEC 60529) | |
Environmental condition | Forward installation | |||
Vibration resistance | - | 10m/s2 (JIS C 60068-2-6) | none | |
Environmental condition | Forward installation | - | ||
Mass (tolerance: ±10%) | 630g | 780g | ||
Indicator Light Function | Compliant with LA6 5-stage flashing/buzzer type | |||
External Interface | Power supply/contact input | Screwless terminal block (12 points) | ||
Power supply: 2 points (DC24V) Contact input (external relay/NPN/PNP): 8 points | ||||
LAN | - | RJ-45 Connector | ||
PoE | Supported (IEEE802.3af Class0 compliant) | |||
Communication method | Ethernet (IEEE802.3 compliant) | |||
Physical Layer | 10BASE-T/100BASE-TX (Auto-MDI/MDIX compatible) | |||
Data Link Layer | CSMA/CD | |||
Network Layer | IP, ARP, and ICMP | |||
Transport Layer | TCP/UDP | |||
Application Layer | HTTP, DHCP, Modbus/TCP, Socket (supports PHN and PNS commands) | |||
USB | USB micro-B connector USB2.0 | |||
Operation section | Setting button (located inside the head cover) | Setting button (located inside the head cover) | ||
Indicator lamp | none | 1 color (green): Built into the clear switch * Always lit when power is on | ||
various settings | Can be set on the Web settings screen | |||
How it works | Signal line control/command control | |||
Connectable LAN cable | Category 5e or higher (supports both straight and crossover) | |||
Compliance standards | EMC Directive (EN 61000-6-4, EN 61000-6-2, EN55032 ClassA, EN55024) | |||
remarks | CE marking compliant | |||
Technical information
PoE (Power over Ethernet)
is a technology that uses an Ethernet communication cable to supply or receive power.
Even if it is difficult to supply power, such as when the device is far from an outlet, you can easily secure power by connecting a PoE-compatible HUB and a LAN cable.
Application Examples
|
Visualization of the time elapsed since the occurrence of an abnormality By visualizing the time that has passed since the occurrence of an abnormality, it is possible to use it as a guide for when to stop the operation or start maintenance. | Visualize indicator light information in various locations  The mirroring function makes it easy to transmit the device's operating status to multiple locations. |
How to use
 Visualization of worker skill levels |
 For wastewater storage tanks, etc. / tanks for various chemicals, food, cleaning fluids, etc. |
Cautions and Prohibitions
[Support Information]
Customer Registration: To receive various product support such as firmware updates for PATLITE network products, you must register as a customer with this manufacturer.