Electrode Holder - BF-□(R)/BS-1(T)
Caution
Product Description
The electrode holder can be used in a variety of operating environments including in high temperatures, high pressures and liquid chemicals.
[Features]
· The Model BF-1 is ideal for liquids with low specific resistance such as sewage.
· The Model BF-□(R) is used when a strong mounting is required.
· The Model BS-1 is used when high-temperature, high-pressure resistance is required
· The Model BS-1T is used when corrosion resistance is required.
[Applications]
· Used for high temperature and high pressure conditions as well as for chemical applications under which PS Series products and the like cannot be used.
Catalog product information click here
Electrode Holder Specifications
Electrode Holder external appearance
BF-1 outline drawing
Weight: approx. 75 g
BF-1 dimensional outline drawing, Units: mm
BF-1 dimensional outline drawing, Units: mm
BF-1 Mounting hole machining dimensions, Units: mm
BS-1T outline drawing
BS-1T structural drawing
BS-1T dimensional outline drawing, Units: mm
BS-1T mounting hole machining dimensions
M18 P = 1.5 (fine screw thread)
| Item | Format | ||||
|---|---|---|---|---|---|
| Model BF-1 | Model BF-3(R) *1 | Model BF-5(R) *1 | Model BS-1 | Model BS-1T | |
| Number Of Poles | 1 | 3 | 5 | - | - |
| Insulation Material | PPS resin (metallic section is SUS) | Fluororesin (PFA) | |||
| Insulation Resistance | 100 MΩ | ||||
| Operating Temperature | Electrode: -10 to +150°C (no icing within specified conditions) Terminal: -10 to +70°C (no condensation or icing within specified conditions) | 250°C max. | 180°C max. | ||
| Operating Pressure | Atmospheric pressure | 1.96 MPa *2 | 981 kPa *2 | ||
| Applications | Liquids with low specific resistance such as wastewater and cloudy water | General applications for purified water, wastewater, etc. | Boiler water level detection or high temperature tanks | Acidic or alkaline solution level detection | |
- *1 Two-wire electrode holders (R types) have a built-in resistance of 6.8 kΩ. They should be used with the two-wire 61F controllers.
- *2 There must be a sufficient ambient temperature in high-pressure environments to prevent vapor leakage. Use according to the pressure-temperature curve. See the catalog for the pressure-temperature curve.
- *See the catalog for specifications other than those detailed above.