Electron Counter (DIN48 × 48) - H7CN
Caution
Product Description
Counter employs a rotary thumb switch that is easy to operate.
[Features]
· A DIN 48 × 48 mm single‑function type featuring only the required functionality.
· No need for bothersome mode settings.
· Supports a wide DC power supply range of 12 to 48 V.
· A total counter series.
· Standard product complies with UL and CSA standards.
[Applications]
· Primarily used for control panels, industrial machinery, etc.
Electronic Counter (DIN 48 × 48) H7CN Specifications
H7CN external appearance
H7CN dimensional drawing
Surface mounting / embedded mounting (common)
Units: mm
H7CN dimensional drawing when adapter is mounted
Units: mm
Mounting hole processing dimensional drawing when adapter is mounted
Units: mm
Note 1. Mounting panel thickness is 1 to 5 mm.
Note 2. When mounting continuously, pay attention to the adapter orientation when arranging horizontally and when arranging vertically.
H7CN dimensional drawing when surface mounted
Units: mm
H7CN dimensional drawing when embedded
Units: mm
H7CN Type
| Series H7CN (Preset Counter) | |||||
|---|---|---|---|---|---|
| Addition Type | |||||
| Maximum Counting Speed | 30 Hz | 5 kHz | |||
| Power Supply Voltage | Output Method | Power Failure Memory | |||
| 100 to 240 V AC, 50/60 Hz | Contact Output | NA | Format | Series H7CN-XLN | Series H7CN-XHN |
| Available | Format | Series H7CN-XLNM | - | ||
| 12 to 48 V DC | Contact Output | NA | Format | Series H7CN-XLN | - |
Notes When Selecting H7CN
| For 30 Hz | For 5 kHz | |
|---|---|---|
| Contact | When inputting directly through relays, switches, etc., bouncing or chattering may occur. | (Bouncing and chattering are counted and so a contact cannot be used.) |
| Non-Contact | When wishing to increase noise countermeasures with slow transistor input. | When inputting at a relatively high speed by transistor. |
Refer to the catalog for product information not listed above.