MOS FET relayG3VM-62C1 / F1
Caution
Product Description
A DIP 8-pin package MOS FET relay with a multi-polar contact configuration. Suitable for use in a variety of circuits.
[Features]
· A MOS FET relay. Suitable for analog signal switching applications.
· Opto-isolated, with a withstand voltage of 2.5 kV AC between input and output. Supports high switching currents.
· The 60 V load voltage series now includes a 2-channel type.
· Capable of micro-analog signal switching.
· Features an input-output withstand voltage of 2,500 Vrms.
· The series includes surface mounted types.
[Applications]
· For communications equipment, OA equipment, testing instruments, disaster/crime-prevention devices.
G3VM-62C1/F1 Specifications
PCB terminal (G3VM-62C1) dimensional drawing
Surface-mount terminal (G3VM-62F1) dimensional drawing
PCB processing dimensions
Mounting pad dimensions (recommended values)
Units: mm
- The actual product is marked differently from the image shown here.
Absolute Maximum Ratings (Ta = 25°C)
| Items | Symbols | Model G3VM-62C1 Model G3VM-62F1 | Unit | Conditions | |
|---|---|---|---|---|---|
| Input Side | LED Forward Current | IF | 50 | mA | - |
| Repeated Peak LED Forward Current | IFP | 1 | A | 100 μs Pulse, 100 pps | |
| DC Forward Current Reduction Rate | ΔIF/°C | -0.5 | mA/°C | Ta ≧ 25°C | |
| LED Reverse Voltage | VR | 5 | V | - | |
| Junction Temperature | TJ | 125 | °C | - | |
| Output Side | Load Voltage (Peak AC/DC) | VOFF | 60 | V | - |
| Continuous Load Current (Peak AC/DC) | IO | 500 | mA | - | |
| On Current Reduction Rate | ΔIO/°C | -5 | mA/°C | Ta ≧ 25°C | |
| Pulse On Current | IOP | 1,500 | A | t = 100 ms, Duty = 1/10 | |
| Junction Temperature | TJ | 125 | °C | - | |
| Input-Output Withstand Voltage (Note 1) | VI-O | 2,500 | Vrms | AC for 1 min | |
| Ambient Operating Temperature | Ta | -40 to +85 | °C | Assuming No Condensation or Freezing | |
| Storage Temperature | Tstg | -55 to +125 | °C | ||
| Soldering Temperature Conditions | - | 260 | °C | 10 s | |
(Note 1): The input-output withstand voltage was measured by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side.
- *Refer to the catalog for other specifications.