2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series
Caution
Product Description
2 mm pitch direct attachment type rectangular connectors for circuit board-to-cable connections.
[Features]
· By directly attaching the socket (to which the terminals are inserted) to the circuit board, costs spent for headers can be reduced.
· With both ends harness product of inserting/removing socket and directly mounting connector, while the function to separate circuit boards is maintained, one header can be reduced from the both ends socket harness that two headers are necessary.
· Small and available with a wide variety of pole configurations.
· Because it is inserted onto the circuit board by being gently press-fit, it is possible to temporarily fasten it to circuit boards.
[Applications]
· Convenient for various types of wiring.
· Notebook personal computer, compact OA devices.
2‑mm Pitch Direct-To-Board Connector
DF4 Series list
Board pre-fixed mechanism
Specifications of DF4 Series 2‑mm Pitch Board-to-Cable Connector
Product Standards
| Rating | Rated current (Note 1) | Crimp | Wire size | AWG 24: 3 A | Operating Temperature Range | -30 to 85°C (Note 2) |
|---|---|---|---|---|---|---|
| AWG 26: 2 A | Operating humidity range | 40 to 80% | ||||
| AWG 28: 1 A | Storage temperature range | -10 to 60°C (Note 3) | ||||
| Rated voltage | Crimp | 250 V AC | Storage humidity range | 40 to 70% (Note 3) | ||
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC | |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 650 V AC for 1 min. | |
| 3. Crimping area resistance | 30 mΩ or less | Measure at 100 mA | |
| 4. Vibration resistance | No damage, cracks, or parts looseness. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours | |
| 5. Humidity resistance | Crimping area resistance: 30 mΩ or less, Insulation resistance: 500 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours | |
| 6. Temperature cycle | Crimping area resistance: 30 mΩ or less, Insulation resistance: 1,000 MΩ or more | (-55°C: 30 mins > 5 to 35°C: 10 mins > 85°C: 30 mins > 5 to 35°C: 10 mins) 5 cycles | |
| 7. Solder heat resistance | No melting of resin parts affecting performance. | Flow: 250°C for 10 seconds | Manual solder: Soldering iron temperature of 300°C for 3 seconds |
Note 1. The rated current may vary depending on the wire size used.
Note 2. This includes temperature increases caused by the flow of current.
Note 3. The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
Note 4. Information contained in this catalog represents general requirements for this product series.
Materials
| Product | Part Name | Materials | Finish | UL Standard |
|---|---|---|---|---|
| Crimping plug | Insulator | Polyamide resin | Black | UL94V-0 |
| Crimping contact for plug | Contacts | Brass | Tin plating | ― |
Product Outline Drawing And Dimensions
Single-row crimping plug
- *Compatible through hole diameter: ø0.8 mm +0, +0.1
Single-row crimping plug dimensional drawing
Crimping contact dimensional drawing
| Conductor Size (Stranded Wire Configuration) | Recommended Cable | Jacket Outer Diameter |
|---|---|---|
| AWG24 (11 cores / 0.16 mm) | UL1061 | ø0.75 to ø1.2 mm |
| AWG26 (7 cores / 0.16 mm) | ||
| AWG28 (7 cores / 0.127 mm) | UL1061/1007 |
Compatible cable (tin-plated annealed copper wire)
- *Strip length: 1.3 to 1.9 mm
| Type | Product No. | HRS No. | Compatible Contact |
|---|---|---|---|
| Applicator | AP105-DF4-2428P | CL901-4539-0 | DF4-2428PCF(05) |
| Press main body | CM-105 | CL901-0005-4 | ― |
| Manual crimping tools | DF4-TA2428HC | CL550-0173-6 | DF4-2428PC(05) |
| Extraction tool | DF-C-PO(B) | CL550-0179-2 | DF4-2428PCF(05) |
Applicable crimping tool for crimping contacts
Double-row crimping plug
- *Compatible through hole diameter: ø0.9 mm ±0.05
Double-row crimping plug dimensional drawing
- *The DIP side may vary depending on the cable thickness and on whether the crimping terminal is bent up or down.
Product Usage Precautions
Soldering precautions
- Flow conditions for automatic soldering devices - Solder temperature: 250°C ±5°C, Soldering time: within 3 seconds
- Manual soldering conditions - Soldering iron temperature: 290°C ±10°C, Soldering time: within 2 seconds
- If the cable neighboring the connector area is bent, the cable jacket may break due to solder heat, causing the cable core to be exposed. To prevent this, ensure a large bending radius (refer to diagram)
- After soldering, applying a load to the cable while the cable or connector is still holding heat may cause the jacket holding area to become loose. As such, be sure to return the connector to room temperature after soldering
Do not use solvents such as trichloroethane that may cause cable coating damage. Also avoid heated cleaning when using solvents.