1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series

Brand :

HIROSE ELECTRIC

Caution

Product Description

1 mm pitch terminal, double-row, multi-pin circuit board to cable rectangular connectors.
[Features]
1. Narrow pitch and low-profile design
The pitch is as narrow as 1.0 mm, and the mating height
Has a low profile with a 5.8 mm straight circuit board type and a 5.5 mm right angle type.
2. Effective mating length of 1 mm
Achieves effective 1 mm mating length with a low profile.
3. Slim size
Uses a newly designed, thin-type reinforced fitting to achieve slimmer external connector dimensions.
High density, occupying 30% of connector space compared with the 1.25 mm pitch DF13 series.
4. With suction cap
The straight header type has a 5.4 x 4.6 mm suction cap producing suction not possible with a standard nozzle.
5. Product variations
(1) A straight header with 10, 20, 30, 40 or 50 poles, and
a right-angle header with 10, 20, 30 or 40 poles.
(2) For straight pin headers there are two types, one with guide posts for circuit board positioning and one without.
(3) Choose from straight or right-angle types based on the pin header application.

1‑mm Pitch Double-Row Contact Board-to-Cable Connector

Can be used with laptop computers, small OA equipment, small consumer products, etc.

1‑mm pitch, double-row

Features of DF20 Series 1‑mm Pitch Double-Row Low-Profile and Multi-Contact Board-to-Cable Connector

Short-pitch, low-profile design
Features a 1.0‑mm short pitch and a mating heights of 5.8 mm (straight type) and 5.5 mm (right-angle type.)

Effective mating length of 1 mm
Low-profile with an effective mating length of 1 mm.

Slim size
Uses a newly-designed, thin-type reinforced fitting to achieve slimmer outer connector dimensions.

Product Specifications

Product Standards

Rating	Rated Current	AWG#28: 1 A AWG#30: 0.9 A AWG#32: 0.7 A	Operating Temperature Range	-35 to 85°C (Note 1)	Storage temperature range	-10 to 60°C (Note 2)
Rating	Rated voltage	100 V AC	Operating humidity range	40 to 80%	Storage humidity range	40 to 70% (Note 2)

Item	Standard	Conditions
1. Insulation resistance	500 MΩ or more	Measure at 100 V DC
2. Withstand voltage	There shall be no flashover or dielectric breakdown	Energize at 300 V AC for 1 min.
3. Contact resistance	30 mΩ or less	Measure at 100 mA
4. Single unit insertion/extraction force	Min. 0.2 N, Max. 2 N	Measure using a steel pin with a thickness of 0.2 ±0.005
5. Vibration resistance	There shall be no discontinuity for 1 μs or greater	Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours
6. Humidity resistance	Contact resistance: 30 mΩ or less, Insulation resistance: 500 MΩ or more	Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours
7. Temperature cycle	Contact resistance: 30 mΩ or less, Insulation resistance: 500 MΩ or more	(-55°C: 30 mins. > 5 to 35°C: 2 to 3 mins. > 85°C: 30 mins. > 5 to 35°C: 2 to 3 mins.) 5 cycles
8. Durability (Mating / Un-mating)	Contact resistance: 30 mΩ or less	50 mating / un-mating cycles
9. Solder Heat Resistance	No melting of resin parts affecting performance	Reflow: At the recommended temperature profile, Manual soldering - Soldering iron temperature: 300°C for 3 seconds

(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating room temperature covers the non-conducting condition of installed connectors in storage, shipment or during transportation.

Materials

Product	Part Name	Materials	Finish	UL Standard
Crimp socket	Insulator	Polyamide resin	Beige	UL94V-0
Crimp contacts for sockets	Contacts	Phosphor bronze	Gold plating	-
Pin header	Insulator	Polyamide resin	Beige	UL94V-0
	Contacts	Phosphor bronze	Gold plating	-
	Bracket	Brass	Tin-copper plating (V type)	-
	Bracket	Brass	Tin-copper plating (H type)	-