BP85 Drawing Holder
Caution
Product Description
Drawing holder can be attached to a board.
[Features]
·With back face seal.
·BP85-3P (-Z) can store paper of A4 size or less without folding.
[Applications]
·For storing blueprints, etc.
BP85 Drawing Holder
External appearance (Transparent color)
Material: Polystyrene
Product outline drawing
Product name, symbol and size
| 1 piece | 2, 5 or 10 pieces | External dimensions mm | Mounting pitch mm | Mounting hole H | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product name and symbol | Product name and symbol | Set Contents | A | B | C *2 | D | E | F | G | |
| ― | BP85-1SP | 10 pieces | 143 | 166.5 | 7.5 | - | - | - | - | - |
| BP85-1P-Z | BP85-1P | 5 pieces | 〃 | 〃 | 11.5 | 131 | 10 | 100 | 50.5 | φ3.5 |
| BP85-2P-Z | BP85-2P | 〃 | 〃 | 226 | 11.5 | 131 | 〃 | 160 | 50.5 | φ3.5 |
| BP85-3P-Z | BP85-3P | 2 pieces | 266 | 330 | 20 | 248 | 20 | 250 | 51 | φ4.5 |
| ― | BP85-4P | 〃 | 320 | 260 | 52 | 300 | 15 | 200 | - | φ4.5 |
*2: Not including double sided tape thickness (approx. 2 mm).
Installation Precautions
- Attach to smooth surfaces, avoiding any uneven or rough areas.
- Use alcohol to remove dust, oil and moisture from the adherend then wipe dry with a waste cloth. Do not use thinner.
- Affix the double-sided tape immediately after removing the backing. Avoid repositioning.
- Double-sided tape adhesion weakens in low temperatures, so heat the double-sided tape and the adherend with a heater before applying (recommended temperature for application: 23°C).
- Press firmly down on the double-side tape immediately after mounting to make sure it adheres completely (recommended force for application: 70 N/cm2).
- Full adhesive power is not fully demonstrated immediately after application, so do not apply load by storing blueprints and instruction manuals (recommended time: 3 hours or more).
Related products
DIN rail (aluminum type) mount hole 4.5 x 25 long hole×
Aluminum DIN rail.
Total length L is specifiable in 5 mm increments from 65 to 495 mm. The manufacturer handles difficult cuts.
Use as a copper bar for grounding control panels, power distribution boards, etc.
Tap machining after purchase is not required as threading has already been processed.
Space saving urethane cable clamp
Prevents external dirt and dust from getting into the control panel.
Multiple cables can be wired with a single part.