(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
NOK seal washers prevent fluids such as oil from leaking from threads including bolts and flanges in various machines such as automobiles, hydraulic and hydraulic machines, construction/agricultural/transportation machines and prevent the intrusion of water, dust, etc.
[Features]
·Rubber material with excellent tear strength, mechanical strength, oil resistance, and heat resistance is used
·Provides stable sealing performance with easy handling, just like a common metallic washer
[Applications]
·For through bolts
·For drain plugs and oil filler plugs
·For pipe flange fittings
·Also used for leak prevention from the inside of bolts and nuts, or for intrusion prevention from outside
*: The cross-sectional view above shows the representative shape of this seal washer.
Roughness is according to JIS B 0601:2001.
(Unit: mm)
Compatible Thread diameter | Nominal Number | Nominal dimensions | NOK Part number | Dimensions of seal washer | Mounting Dimension | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | ||||||||||
Dimensions | Tolerance | Dimensions | Dimensions | Tolerance | Dimensions | Dimensions | Tolerance | Max | min | min | C Chamfering | |||||||
M4 | WD-4 | WD | 4 | 10 | 1.5 | CW1002D0 | 4.0 | +0.3 0 | 6.2 | 10.0 | ±0.3 | 1.5 | 2.5 | ±0.2 | 4.3 | 7.0 | 14.0 | 0.6±0.1 |
M5 | WD-5 | WD | 5 | 12 | 1.8 | CW1007D0 | 5.0 | +0.4 0 | 6.0 | 12.0 | 1.8 | 2.8 | +0.4 0 | 5.3 | 8.0 | 16.0 | ||
M6 | WD-6 | WD | 6 | 14 | 1.8 | CW1014D2 | 5.8 | 7.8 | 14.0 | ±0.4 | 1.8 | 2.8 | 6.4 | 10.0 | 18.0 | |||
M8 | WD-8 | WD | 8 | 16 | 2.0 | CW1027D0 | 7.8 | 10.3 | 16.0 | 2.0 | 3.0 | 8.4 | 13.0 | 20.0 | ||||
M10 | WD-10 | WD | 10 | 19 | 3.0 | CW1042D0 | 9.8 | 12.8 | 19.0 | 3.0 | 4.0 | +0.5 0 | 10.5 | 16.0 | 23.0 | |||
M12 | WD-12 | WD | 12 | 22 | 3.5 | CW1053D2 | 11.8 | 14.5 | 22.0 | 3.5 | 5.0 | 13.0 | 18.0 | 26.0 | ||||
M14 | WD-14 | WD | 14 | 25 | 3.5 | CW1219D0 | 13.8 | 16.5 | 25.0 | 3.5 | 5.0 | 15.0 | 21.0 | 29.0 | ||||
M16 | WD-16 | WD | 16 | 26 | 3.5 | CW1077D0 | 15.8 | 18.0 | 26.0 | 3.5 | 5.4 | 17.0 | 24.0 | 30.0 |
Tightening bearing surface
·Chamfer the entrance of the female thread. The required size of the chamfer depends on the size of the seal washer. Please refer to the values shown in the dimension table.
·The inner diameter of the rubber section of type WD sealing is the same as the bolt diameter, so there is a risk of scratching the rubber section when a bolt is passed through the seal washer. Therefore, be sure to chamfer the end of bolts.
2. Due to the mechanism of a seal washer, the sealing effect of a washer that is once mounted will be greatly reduced when reassembled, so the manufacturers recommends replacing it with a new one. In particular, the type WD has a mechanism that seals due to large deformation of the rubber section, so please do not reuse it.
3. The ring of type WD seal washer may deform if excessive tightening torque is applied. In addition, the manufacturer recommends using a spring lock washer in combination to add a loose-fitting effect.
4. In order to prevent damage on the rubber section by threads of a bolt, pass the bolt through the seal washer before tightening.
5. The manufacturer recommends retightening of bolts at a proper time after assembly to prevent the tightening torque from decreasing and to improve the sealing performance.
6. When using for light alloy sections, the type WD may damage the mating surface with the metal washer, so the manufacturer recommends using the type WF.
Part Number |
---|
WD-8 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship |
---|---|---|---|---|---|
฿ 46.84 | SEAL WASHERS | 1 Piece(s) | Same day |
Loading...
Type | Seal Washer | Applicable Screw Dia. | M8 | Metal ring material | SPCC |
---|---|---|---|---|---|
Shape(mm) | 16.0 | Rubber Material | A103 |
Please check the type/dimensions/specifications of the part WD-8 in the Seal Washer (Type WD) (CW) series.
How can we improve?
How can we improve?