Stepper Motor AZ Series
Caution
Product Description
[Features]
· Equipped with newly developed ABZO sensor
· No external sensor required
· Reduced home return time
· No battery required
· Energy saving and low heat generation
· Three driver options to match your system configuration
· Easy operation enabled by the MEXE02 data setting software
Drawing
AC power supply input: Standard type
· Motor
AZM46AC
AZM48AC
AZM66AC/AZM69AC
AZM98AC/AZM911AC
· Driver
The drawing is of a type with built-in positioning function. External dimensions and accessories are common to all driver types.
Product Specification
General Specifications
*1. Only for models with electromagnetic brake
*2. According to Oriental Motor measurement conditions
*3. When a heat sink equivalent to or larger than a 200×200 mm, 2 mm thick aluminum board is attached
*4. T.I.R (Total Indicator Reading): Indicates the total dial gauge reading when the measurement section is rotated once around the reference shaft center.
[Cautions]
- When measuring insulation resistance or conducting dielectric strength tests, disconnect the motor from driver. Also, do not perform these tests on the ABZO sensor section of the motor.
Specifications: AC power supply input
■Standard type: Mounting angle dimensions 42 mm, 60 mm, 85 mm
* 1. The values in parentheses are when a motor with an electromagnetic brake is connected.
* 2. The motor with electromagnetic brake has a specification of 24 V DC +/- 4% when extended by 20 m using a cable.
· Motor
| Mounting hole square dimension mm | Part number | L | Weight kg |
|---|---|---|---|
| 42 | AZM46AC | - | 0.44 |
| AZM48AC | - | 0.68 | |
| 60 | AZM66AC | 72 | 0.91 |
| AZM69AC | 97.5 | 1.4 | |
| 85 | AZM98AC | 84 | 1.9 |
| AZM911AC | 114 | 3 |
· Driver
- Weight: 0.65 kg
[Accessories]
- Main power supply / regenerative resistor connector (CN4)
Connector: 05JFAT-SAXGDK-H5.0 (J.S.T. MFG. CO., LTD.)
Connector connection lever - Input/output signal connector (CN5)
Connector: DFMC1,5/12-ST-3,5 (Phoenix Contact Co., Ltd.) - 24 V DC power supply input, electromagnetic brake connection, regenerative resistor thermal input, power cutoff signal input/output connector (CN1)
Connector: DFMC1,5/7-ST-3,5-LR (Phoenix Contact Co., Ltd.)