Linear drive, DFM Series
Brand :
FESTO
Caution
Product Description
[Features]
· At a glance Drive and guide unit in a single housing
· Minimal space requirement
· Minimal mounting time
· Choice of compressed air supply ports
· Wide range of mounting options
Sturdy and precise
· Good protection against torsion
· High rigidity
· Maintenance-free
High resistance to torques and transverse loads
· With plain-bearing guide: high rigidity thanks to large-diameter guide rods and four plain-bearing bushes
With recirculating ball bearing guide:for applications involving torque loads
Linear drive, DFM Series
Features
Specifications
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pneumatic connection | M3 | M3 | M5 | M5 | M5 | G1/8 | G1/8 | G1/8 | G1/4 | G1/4 | G3/8 | G3/8 | |
| Design | Piston | ||||||||||||
| Piston rod | |||||||||||||
| Guide rods with yoke | |||||||||||||
| Cushioning | Elastic cushioning rings/plates at both ends | ||||||||||||
| Position sensing | Via proximity switch | ||||||||||||
| Type of mounting | With through-hole | ||||||||||||
| With female thread | |||||||||||||
| Mounting position | Any | ||||||||||||
| Protection against torsion/guide | Guide rod with yoke/with plain-bearing or ball bearing guide | ||||||||||||
| - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating and environmental conditions | - | - | - | - | - | - | - | - | - | - | - | - | - |
| - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Operating pressure [bar] | 2 to 8 | 1.5 to 8 | 2 to 10 | 1.5 to 10 | 1 to 10 | 0.5 to 10 | |||||||
| Operating medium | Compressed air to ISO 85731:2010 [7:4:4] | ||||||||||||
| Note on operating/ pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||||||||||||
| Ambient temperature [℃] | DFM-...-GF | -10 to +60 | -20 to +80 | ||||||||||
| DFM-...-KF | - | -5 to +60 | |||||||||||
| Corrosion resistance CRC | 1 | ||||||||||||
Speeds [m/s]
| Piston diameter | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cushioning P | ||||||||||||
| Maximum speed, advancing | 1.3 | 1.7 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |
| Maximum speed, retracting | 1.1 | 1.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.6 | 0.6 | 0.4 | 0.4 |