(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
· Prevents condensation in small cylinders and air grippers.
· Draws out internal water vapor.
· No power supply or additional engineering required.
· Just install the Moisture Control Tube into your existing setup and go.
IDK Series (Straight Type) external appearance
Inner sleeve external appearance
Model | IDK02 | IDK04 | IDK06 |
---|---|---|---|
Fluid*1 | Compressed air | ||
Maximum operating pressure | 0.7 MPa | ||
Operating temperature | 0 to 60°C (no freezing) | ||
Operating environment*2) | Indoors where there is no exposure to water, etc. (0 to 40°C, 0 to 75% RH) | ||
Minimum bending radius*3) mm | 10 | 20 | 40 |
Number of moisture control tubes | 2 pcs | ||
Color | Transparent [Color will turn to brown over time but the functions are not affected. ] | ||
Applicable fittings*4) | KQ2 | ||
Material | Fluoropolymer |
*1: Use the moisture control tube with a refrigerated air dryer and a mist separator installed in the upstream compressed air line. The condensation prevention performance may be lowered depending on the quality of the compressed air (oil, dewpoint) supplied.
*2: Use the product in an operating environment where humidity is low. The condensation prevention performance may be lowered if used under a high-humidity environment.
*3: Minimum bending radius is the value at which the moisture control tube is bent or flattened at 20°C. During actual use, be careful not to bend or flatten, etc., the tube or the inner sleeve.
*4: The inner sleeve is already mounted and cannot be removed. If the inner sleeve comes off, re-insert the sleeve before mounting the fitting.
*5: Do not cut the tube.
Straight Type dimensional drawing
(Units: mm)
Model | Outer diameter × inner diameter D | Nominal length X | Full length L |
---|---|---|---|
IDK02-100 | 2 × 1.2 | 100 | 120 |
IDK02-200 | 200 | 220 | |
IDK04-100 | 4 × 2.5 | 100 | 140 |
IDK04-200 | 200 | 240 | |
IDK06-100 | 6 × 4 | 100 | 140 |
IDK06-200 | 200 | 240 |
*Dimensions at 40% relative humidity. Dimensions may change if the relative humidity changes.
IDK Series (Coil Shape Type) external appearance
Model | IDK04-□-C1 | IDK06-□-C1 |
---|---|---|
Fluid*1 | Compressed air | |
Maximum operating pressure | 0.7 MPa | |
Fluid temperature | 0 to 60°C (no freezing) | |
Operating environment*2 | Indoors where product is not exposed to water, etc. (0 to 40°C, 0 to 75% RH) | |
Number of moisture control tubes | 2 pcs | |
Color | Transparent [Color will turn to brown over time, but the functions are not affected. ] | |
Applicable fittings*3) | KQ2 | |
Material | Fluoropolymer |
*1: Use the moisture control tube with a refrigerated air dryer and a mist separator installed in the upstream compressed air line. The condensation prevention performance may be lowered depending on the quality of the compressed air (oil, dewpoint) supplied.
*2: Use the product in an operating environment where humidity is low. The condensation prevention performance may be lowered if used under a high-humidity environment.
*3: The inner sleeve is already mounted and cannot be removed. If the inner sleeve comes off, re-insert the sleeve before mounting the fitting.
(Units: mm)
IDK04-100-C1 dimensional drawing
(Units: mm)
IDK04-200-C1 dimensional drawing
(Units: mm)
Part B details
(Units: mm)
IDK06-100-C1 dimensional drawing
(Units: mm)
IDK06-200-C1 dimensional drawing
Part Number |
---|
IDK06-100-C1 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Type | Outer Dia. D (Ø) | O.D. [Distinction] | Inner Dia. d (Ø) | I.D. [Distinction] | Number of Cables (Core) | Minimum Bending Radius (mm) | Operating Temperature (°C) | Operating Pressure Range (when using air) (MPa) | Length (m) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 2,091.00 | SMC DRYER | 1 Piece(s) | 55 Day(s) | Coil | 6 | ~6 | 4 | ~4 | 1 | - | 0~60 | null~0.7 | 0.1 |
Loading...
Cutting Service Usage | Presence | Material | Fluororesin | Applicable Fluid | Air |
---|---|---|---|---|---|
Operating Environment | Standard | Color | Transparency | Material, Fluororesin | Standard Fluoropolymer |
Please check the type/dimensions/specifications of the part IDK06-100-C1 in the Moisture Control Tube, Series IDK series.
Part Number |
---|
IDK04-100 |
IDK04-100-C1 |
IDK04-200 |
IDK04-200-C1 |
IDK06-200 |
IDK06-200-C1 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | Type | Outer Dia. D (Ø) | O.D. [Distinction] | Inner Dia. d (Ø) | I.D. [Distinction] | Number of Cables (Core) | Minimum Bending Radius (mm) | Operating Temperature (°C) | Operating Pressure Range (when using air) (MPa) | Length (m) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 1,201.05 | 1 Piece(s) | Same day | Straight | 4 | ~4 | 2.5 | ~3 | - | 20 | - | - | 0.1 | ||
฿ 1,592.05 | 1 Piece(s) | 3 Day(s) | Coil | 4 | ~4 | 2.5 | ~3 | 1 | - | 0~60 | null~0.7 | 0.1 | ||
฿ 1,601.40 | 1 Piece(s) | Same day | Straight | 4 | ~4 | 2.5 | ~3 | - | 20 | - | - | 0.2 | ||
฿ 2,135.20 | 1 Piece(s) | 3 Day(s) | Coil | 4 | ~4 | 2.5 | ~3 | 1 | - | 0~60 | null~0.7 | 0.2 | ||
฿ 2,179.40 | 1 Piece(s) | Same day | Straight | 6 | ~6 | 4 | ~4 | - | 40 | - | - | 0.2 | ||
฿ 2,890.85 | 1 Piece(s) | 3 Day(s) | Coil | 6 | ~6 | 4 | ~4 | 1 | - | 0~60 | null~0.7 | 0.2 |
How can we improve?
How can we improve?