(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(24 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

MHW2-20D1-M9BAM

Gripping Force (when 0.5Mpa at closing) Cylinder internal diameter Finger position / Options Auto switch Number of switches Lead wire length Size Made to order specifications Connector type for gripper opening/closing Port thread type type Environment, Applications CAD Days to Ship

Specification/Dimensions

Gripping Force (when 0.5Mpa at closing)(N)
14.3

29.2

53.7

94.9

153.1
Clear
Cylinder internal diameter(mm)
20

25

32

40

50
Clear
Finger position / Options
- Flat finger type (standard)
- Open/close direction tapped mounting
Clear
Auto switch
Y7BA

Y7BW

Y7BWV

Y7NW

Y7NWV

Y7P

Y7PV

Y7PW

Y7PWV

M9B

M9BA

M9BAV

M9BV

M9BW

M9BWV

M9N

M9NA

M9NV

M9NW

M9NWV

M9P

M9PA

M9PV

M9PW

M9PWV

Y59A

Y59B

Y69A

Y69B

Without auto switch (built-in magnet)
Clear
Number of switches
1 pc.

2 pcs.

3 pcs.

None
Clear
Lead wire length
- 0.5 m
- 1 m
- 3 m
- 5 m
- None
Clear
Size
- 1/4
- 1/8
- 5
Clear
Made to order specifications
- Heat resistance (100°C)
- Heat resistance specification (100°C)
- Fluorine grease
- Fluoroelastomer seal
- Grease for food processing machines
- Grease for food processing machines / fluorine grease
- No magnet
- None
Clear
Connector type for gripper opening/closing
- M8 3-pin
- M8 4-pin
- M12 4-pin
- None
Clear
Port thread type
- G
- M
- NPT
- Rc
Clear
type
- MHW2-20□
- MHW2-25□
- MHW2-32□
- MHW2-40□
- MHW2-50□
Clear
Environment, Applications
- Standard
- Dust Resistant
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

3 Day(s) or Less

19 Day(s) or Less

20 Day(s) or Less

25 Day(s) or Less

35 Day(s) or Less

45 Day(s) or Less

55 Day(s) or Less
Clear

Specify Alterations

180° Angular Air Gripper, Rack And Pinion Type, MHW2 Series

Compare This Product

Brand :

SMC

Part Number :

MHW2-20D1-M9BAM

MHW2-20D1-M9BMS

MHW2-20D1-M9BVM

MHW2-20D1-Y59BZS

MHW2-20D-M9BALS

MHW2-20D-M9BASDPC

MHW2-20D-M9BVM

MHW2-20D-M9NWZ

MHW2-25D1-M9BWVZ-X79

MHW2-25D1-M9NM

MHW2-25D-M9BASBPC

MHW2-32D-M9BASBPC

MHW2-32D-M9BWZS

MHW2-32D-M9PWSDPC

MHW2-40D1-M9BL-X79A

MHW2-40D1-M9BW3

MHW2-40D1-M9PWVSDPC3

MHW2-40D-M9BASBPC

MHW2-40D-M9BAVL

MHW2-40TFD1-M9PSAPC

MHW2-20D1-M9BAM

From :

฿ 8,904.80/Unit
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)Caution

Refer to the catalog for details on product specifications.
Product images may be representative. Refer to the manufacturer's catalog for details.

Product Description

[Features]
· The unique seal construction allows for a shorter overall length and a constant grip strength when opening/closing.
· Can be equipped with auto switches in 4 locations.
· The key connection offers excellent impact-resistance.
· 2 types of finger option.
· Dustproof structure.
· Bearings equipped as standard.

180° Angular Type Air Chuck MHW2 Series Specifications

MHW2 Series JIS symbol (double acting, external gripping)

Finger option: flat finger type (standard) external appearance

Finger option: open/closing finger tap mounting type external appearance

Applicable fluids	Air
Operating pressure	0.15 to 0.7 MPa
Ambient temperature and working fluid temperature	-10 to +60°C
Repeat accuracy	±0.2 mm
Maximum operating frequency	ø20 (diameter 20 mm), ø25 (diameter 25 mm): 60 c.p.m ø32 to 50 (diameter 32 to 50 mm): 30 c.p.m
Lubrication	Non-lube
Operating method	Double acting type
Auto switch (option)^*	Solid state auto switch (3-wire, 2-wire)

Note) See the manufacturer's catalog for detailed specifications of auto switches.

Model

Model	Cylinder inner diameter (mm)	Gripping moment (effective value N·m)^*	Opening/closing angle (both sides)		Weight (g)^*
Model	Cylinder inner diameter (mm)	Gripping moment (effective value N·m)^*	Opening side	Closing side (finger touching)	Weight (g)^*
MHW2-20D	20	0.30	180 °	-5 °	300
MHW2-20D1	20	0.30		-5 °	320
MHW2-25D	25	0.73		-6 °	510
MHW2-25D1	25	0.73		-6 °	540
MHW2-32D	32	1.61		-5 °	910
MHW2-32D1	32	1.61		-5 °	950
MHW2-40D	40	3.70		-5 °	2,140
MHW2-40D1	40	3.70		-5 °	2,270
MHW2-50D	50	8.27		-4 °	5,100
MHW2-50D1	50	8.27		-4 °	5,350

*Value at pressure of 0.5 MPa.
*Values do not include auto switch weight.

Outline dimensional drawing

MHW2-20D / flat finger type (standard) dimensional drawing

MHW2-20D / auto switch mounting groove dimensional drawing

(Unit: mm)

MHW2-20D1 / open/closing finger tap mounting type dimensional drawing

Structural drawing

MHW2 Series structure drawing

MHW2 series / fingers closed structure drawing

MHW2 series / fingers open structure drawing

Component parts

Number	Part name	Material	Note
1	Body	Aluminum Alloy	Hard anodizing
2	Piston	Aluminum Alloy	Hard anodizing
3	Pinion gear	Carbon steel	Heat treated
4	Seal cover	Brass	-
5	Dampers	Urethane rubber	-
6	Finger (A)	Carbon steel	Nitrided
7	Finger (B)	Carbon steel	Nitrided
8	Rubber magnet	Synthetic rubber	-
9	Rack	Carbon steel	Nitrided
10	Cap	ø20 (diameter 20 mm), 25 (diameter 25 mm): resin	-
10	Cap	ø32 to 50 (diameter 32 to 50 mm): aluminum alloy	Hard anodizing
11	Piston bolt	Stainless steel	-
12	Ball bearing	Carbon steel	Shield type
13	Key	Carbon steel	-
14	Hexagon socket head bolt	Carbon steel	Zinc chromate
15	Hex Socket Set Screw	Carbon steel	Zinc chromate
16	Type C retaining ring	Carbon steel	Phosphate coated
17	Type C retaining ring	Carbon steel	Phosphate coated

Precautions

*Note that when using the open/closing finger tap mounting type, there is a risk the bolt may interfere with the speed controller. (When using MHW)
*See the manufacturer's catalog for the selection procedure, effective gripping force and allowable overhang amount.
*Be sure to read the product-specific precautions in the manufacturer's catalog before use.
*See the manufacturer's catalog for product information other than the above.

Precautions when mounting

: 30; 60; 90

Part Number
MHW2-20D1-M9BAM
MHW2-20D1-M9BMS
MHW2-20D1-M9BVM
MHW2-20D1-Y59BZS
MHW2-20D-M9BALS
MHW2-20D-M9BASDPC
MHW2-20D-M9BVM
MHW2-20D-M9NWZ
MHW2-25D1-M9BWVZ-X79
MHW2-25D1-M9NM
MHW2-25D-M9BASBPC
MHW2-32D-M9BASBPC
MHW2-32D-M9BWZS
MHW2-32D-M9PWSDPC
MHW2-40D1-M9BL-X79A
MHW2-40D1-M9BW3
MHW2-40D1-M9PWVSDPC3
MHW2-40D-M9BASBPC
MHW2-40D-M9BAVL
MHW2-40TFD1-M9PSAPC
MHW2-40TFD-M9PWVSDPC
MHW2-50D-X5
MHW2-50TFD-M9PWVSDPC
MHW2-50TND-X4

Price	Name	Minimum Order Qty.	Days to Ship	Finger Opening Angle A1 (deg)	Finger Closing Angle A2 (deg)	Gripping Force (when 0.5Mpa at closing) (N)	Environment, Applications	Cylinder internal diameter (mm)	Finger position / Options	Auto switch	Number of switches	Lead wire length	Size	Made to order specifications	Connector type for gripper opening/closing	Port thread type
฿ 20,158.58	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Open/close direction tapped mounting	M9BA	2 pcs.	1 m	5	None	None	M
฿ 9,952.00	SMC HAND/CHUCK	1 Piece(s)	3 Day(s)	-	-5	14.3	Dust Resistant	20	Open/close direction tapped mounting	M9B	1 pc.	1 m	5	None	None	M
฿ 19,620.06	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Open/close direction tapped mounting	M9BV	2 pcs.	1 m	5	None	None	M
฿ 18,475.48	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Open/close direction tapped mounting	Y59B	1 pc.	5 m	5	None	None	M
฿ 17,936.95	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Flat finger type (standard)	M9BA	1 pc.	3 m	5	None	None	M
฿ 21,100.54	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Flat finger type (standard)	M9BA	2 pcs.	-	5	None	M12 4-pin	M
฿ 18,946.46	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Flat finger type (standard)	M9BV	2 pcs.	1 m	5	None	None	M
฿ 19,216.02	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	14.3	Dust Resistant	20	Flat finger type (standard)	M9NW	2 pcs.	5 m	5	None	None	M
฿ 23,322.18	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-	29.2	Dust Resistant	25	Open/close direction tapped mounting	M9BWV	2 pcs.	5 m	5	-	None	M
฿ 21,774.15	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-	29.2	Dust Resistant	25	Open/close direction tapped mounting	M9N	2 pcs.	1 m	5	None	None	M
฿ 22,851.19	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-	29.2	Dust Resistant	25	Flat finger type (standard)	M9BA	2 pcs.	-	5	None	M8 4-pin	M
฿ 26,755.33	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	53.7	Dust Resistant	32	Flat finger type (standard)	M9BA	2 pcs.	-	1/8	None	M8 4-pin	Rc
฿ 23,389.72	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	53.7	Dust Resistant	32	Flat finger type (standard)	M9BW	1 pc.	5 m	1/8	None	None	Rc
฿ 14,461.60	AIR GRIPPER	1 Piece(s)	55 Day(s)	-	-5	53.7	Dust Resistant	32	Flat finger type (standard)	M9PW	2 pcs.	-	1/8	None	M12 4-pin	Rc
฿ 32,914.26	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Open/close direction tapped mounting	M9B	2 pcs.	3 m	1/8	Grease for food processing machines	None	Rc
฿ 33,756.12	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Open/close direction tapped mounting	M9BW	3 pcs.	-	1/8	None	None	Rc
฿ 36,785.23	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Open/close direction tapped mounting	M9PWV	3 pcs.	-	1/8	None	M12 4-pin	Rc
฿ 34,092.62	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Flat finger type (standard)	M9BA	2 pcs.	-	1/8	None	M8 4-pin	Rc
฿ 32,881.10	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Flat finger type (standard)	M9BAV	2 pcs.	3 m	1/8	None	None	Rc
฿ 34,160.16	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Open/close direction tapped mounting	M9P	2 pcs.	-	1/8	None	M8 3-pin	G
฿ 33,688.58	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-5	94.9	Dust Resistant	40	Flat finger type (standard)	M9PWV	2 pcs.	-	1/8	None	M12 4-pin	G
฿ 42,843.45	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-4	153.1	Dust Resistant	50	Flat finger type (standard)	-	None	None	1/4	Fluoroelastomer seal	None	Rc
฿ 46,007.65	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-4	153.1	Dust Resistant	50	Flat finger type (standard)	M9PWV	2 pcs.	-	1/4	None	M12 4-pin	G
฿ 43,988.04	SMC HAND/CHUCK	1 Piece(s)	35 Day(s)	-	-4	153.1	Dust Resistant	50	Flat finger type (standard)	-	None	None	1/4	Heat resistance specification (100°C)	None	NPT

Basic Information

Type	Main body	Gripping Methods	Pinch, Swing Type	Number of Fingers	2 pcs.
Main Body Shape	Square Shape	Operation Method	Double Acting Type	Additional Functions	Speed control
Stroke Adjustment Mechanism	Not Provided