5-Port Solenoid Valve, Base Mounted, VZ5000 Series
Caution
- Product images may be representative. Refer to the manufacturer's catalog for details.
Product Description
A compact solenoid valve with a width of 18 mm.
[Features]
・ Suitable for driving cylinders up to ø50 (diameter: 50 mm)
· Low power consumption: 1.8 W DC
・ Non-plug-in type
・ Base mounted
5-Port Solenoid Valve VZ5000 Series Specifications
VZ5000 Series external appearance
| Usable Fluids | Air | |
|---|---|---|
| Operating Pressure Range MPa | 2-position single | 0.15 to 0.7 |
| 2-position double | 0.1 to 0.7 | |
| 3 Position | 0.15 to 0.7 | |
| Ambient Temperature and Operating Fluid Temperature °C | -10 to +50°C (No freezing. See 44 above.) | |
| *1: Response time (ms) (at 0.5 MPa) | 2 Position Single, Double | 20 or less |
| 3 Position | 50 or less | |
| Maximum Operating Frequency Hz | 2 Position Single, Double | 10 |
| 3 Position | 3 | |
| Effective area | See table below. | |
| *2:Manual operation | Non-locking push type, screwdriver-operated locking type, hand-operated locking type | |
| Pilot Exhaust Method | Pilot valve individual exhaust type, main valve / pilot valve common exhaust type | |
| Lubrication | Not required | |
| Mounting Orientation | Free | |
| *3:Impact resistance / Vibration resistance (m/s2) | 300/50 | |
| Enclosure | Dust-proof | |
*1: Based on JIS B 8374-1981 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Operating torque with locking type manual operation is 0.2 N⋅m or less.
*3: Impact resistance: No malfunction occurred when tested using a drop tester. The test was performed once for each condition, in both energized and de-energized states, in the axial and right angle directions of the main valve/armature. (Initial value)
Vibration resistance: No malfunction occurred in 1 sweep test between 45 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)
Structure Drawing
2-position single
2-position double
3-Position Closed Center, Exhaust Center, Pressure Center
*Drawing shows closed center type
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| (1) | Body | Die-cast aluminum | Platinum silver |
| (2) | Piston Plate | Resin | Black |
| (3) | Spool Valve | Aluminum/H-NBR | - |
| (4) | Piston | Resin | - |
| (5) | End Cover | Die-cast aluminum | Black painted |
| (6) | Spool Spring | SUS | - |
Replacement Parts
| Number | Part name | Material | Part number | Note |
|---|---|---|---|---|
| (7) | Sub-plate | Die-cast aluminum | DXT199-7-1*P | Rc1/8 |
| DXT199-7-2*P | Rc1/4 | |||
| (8) | Solenoid assembly | Epoxy, SUS | DXT170-C-□□□ | - |
| (9) | O-ring | NBR | KA00481 | Same as VZ1000 Series Same as VZ3000 Series |
*Thread type: No mark / Rc, F / G, N / NPT, T / NPTF
External Dimensions
2-position single
(Unit: mm)
L plug connector (L): VZ5140-□ L □□-(01, 02) dimensional drawing
(Unit: mm)
Grommet (G) (H): VZ5140-□(G, H)□□-(01, 02) dimensional drawings
M plug connector (M): VZ5140-□M□□-(01, 02) dimensional drawing
*Numbers inside boxes indicate with models indicator light / surge voltage suppressor.
DIN terminal (D): VZ5140-□D□□-(01, 02) dimensional drawing
2-position double
(Unit: mm)
L plug connector (L): VZ5240-□L□□-(01, 02) dimensional drawing
(Unit: mm)
Grommet (G) (H): VZ5240-□(G, H)□□-(01, 02) dimensional drawings
Precautions
- *Product images may be representative images.
- *See the manufacturer's catalog for product information other than the above.