3-Port Solenoid Valve, Pilot Type, Rubber Seal SYJ700 Series
Caution
- Product images may be representative. Refer to the manufacturer's catalog for details.
Product Description
- 3-Port Solenoid Valve, Pilot Type, Rubber Seal SYJ700 Series from SMC.
- Innovative combination of space efficiency and performance superiority.
- Provides real value to the design solution.
- Small profile increases design flexibility and minimizes space requirements.
- Utilizes a low-power (0.5 watts standard) pilot solenoid design.
- Dramatically reduces thermal heat generation.
- Improves performance and decreases operating costs.
- Allows for direct control by PLC output relays.
- All electrical connections are available with lights and surge suppression.
3-Port Pilot Type SYJ700 Series Specifications
SYJ700 Series (body ported type) external appearance
SYJ700 Series (base mounted type) external appearance
Specifications Table
| Fluid | Air | |
|---|---|---|
| Operating Pressure Range MPa | Internal Pilot Type | 0.15 to 0.7 |
| Ambient Temperature and Operating Fluid Temperature °C | -10 to 50 (no freezing) | |
| *1: Response Time ms (at 0.5 MPa) | 30 or less | |
| Maximum Operating Frequency Hz | 5 | |
| Manual Operation | Non-locking push type, push-turn locking type screwdriver-operated type, push-turn locking manual-operation type | |
| Pilot Exhaust Method | Pilot valve individual exhaust type, main valve / pilot valve common exhaust type | |
| Lubrication | Not required | |
| Mounting Orientation | Free | |
| *2: Impact Resistance / Vibration Resistance: m/s2 | 150/30 | |
| Enclosure | Dust-proof (*DIN terminal and M8 connector: IP65) | |
*Based on IEC60529.
*1: Based on JIS B 8419:2010 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
Solenoid Specifications
| Electrical Entry | Grommet (G) / (H), L-type plug connector (L) M-type plug connector (M), DIN terminal (D) / (Y) M8 connector (W) | |||
|---|---|---|---|---|
| G, H, L, M, W | D, Y | |||
| Coil rated voltage (V) | DC | 24, 12, 6, 5, 3 | 24, 12 | |
| AC 50/60 Hz | 100, 110, 200, 220 | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage* | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| With power saving circuit | 0.1 (only with light) * [Startup 0.4, holding 0.1] | |||
| *Apparent Power VA | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V 115 V | 0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)] | 0.86 (with indicator light: 0.97) [0.94 (with indicator light: 1.07)] | ||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V 230 V | 1.30 (with light: 1.34) [1.42 (with indicator light: 1.46)] | 1.27 (with light: 1.46) [1.39 (with indicator light: 1.60)] | ||
| Surge Voltage Suppressor | Diode (varistor for DIN terminal and non-polar type are ) | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
- *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
- For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
- *For details, see p. 1214 of the SMC catalog.
Structure Drawing
SYJ700 Series structure drawing 1
SYJ700 Series structure drawing 2
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Die-cast aluminum | Urban white |
| 2 | Piston Plate | Resin | Urban white |
| 3 | End Cover | Die-cast aluminum | Urban white |
| 4 | Piston | Resin | - |
| 5 | Spool Valve Assembly | - | - |
| 6 | Spool Spring | SUS | - |
Replacement Parts
| Number | Part name | Part Number | Note | |
|---|---|---|---|---|
| 7 | Sub-plate * | SYJ700-9-1 (-Q) | 1/8 | Aluminum diecast |
| SYJ700-9-2 (-Q) | 1/4 | |||
| 8 | Pilot Valve | V111 (T)-□□□□ | - | - |
| - | Bracket Assembly | SYJ700-19-1A | - | - |
*Add the suffix "-Q" for CE compliant.
External Dimensions
Body Ported Types
(Unit: mm)
Grommet (G), (H): SYJ7□2-□(G/H)□□-01□ dimensional drawing
(Unit: mm)
With bracket: SYJ7□2-□(G/H)□□-01□-F dimensional drawing
(Unit: mm)
L-type plug connector (L): SYJ7□2-□L□□-01□(-F) dimensional drawing
(Unit: mm)
M-type plug connector (M): SYJ7□2-□M□□-01□(-F) dimensional drawing
*Values in [ ] are for AC.
Base Mounting Type (with Sub-Plate)
(Unit: mm)
Grommet (G), (H): SYJ7□4-□(G/H)□□-(01/02)□ dimensional drawing
(Unit: mm)
L-type plug connector (L): SYJ7□4-□L□□-(01/02)□ dimensional drawing
*Values in [ ] are for AC.
Precautions
- *Product images may be representative images.
- *See the manufacturer's catalog for product information other than the above.