5-Port Solenoid Valve, Plug-In Cassette Type, SZ3000 Series Valve
Caution
- Product images may be representative. Refer to the manufacturer's catalog for details.
Product Description
SMC Solenoid Valve.
[Features]
· A plug-in cassette type for easy valve replacement.
· Equipped with valves with switches
· High speed response of 10 ms
· Low power consumption at just 0.6 W
· Easy tube attachment and detachment
· High reliability and long service life of 50 million cycles or more
· The connector entry direction can be changed from top entry to side entry in a single-action.
5-Port Solenoid Valve, Plug-In Type, SZ3000 Series Solenoid Valve specifications
No mark: External appearance without switch
J: External appearance with switch
*See the manufacturer's catalog for switch usage.
No mark: External appearance of non-locking push type
D: External appearance of push-turn locking screwdriver-operated type
| Series | SZ3000 | ||
|---|---|---|---|
| Usable Fluids | Air | ||
| Internal pilot operating pressure range (MPa) | 2-position single | 0.15 to 0.7 | |
| 2-position double | 0.1 to 0.7 | ||
| 3 Position | 0.2 to 0.7 | ||
| 4-position, dual 3-port valve | 0.15 to 0.7 | ||
| External pilot operating pressure range (MPa) | Operating Pressure Range | -100 kPa to 0.7 | |
| Pilot Pressure Range | 2-position single | 0.25 to 0.7 | |
| 2-position double | 0.25 to 0.7 | ||
| 3 Position | 0.25 to 0.7 | ||
| Ambient and fluid temperature (°C) | -10 to 50 (no freezing) | ||
| Maximum operating frequency (Hz) | 2 Position Single, Double 4-position, dual 3-port valve | 10 | |
| 3 Position | 3 | ||
| Manual Operation | Non-locking push type, Push-turn locking slotted type | ||
| Pilot Method | Main valve, pilot valve common exhaust type | ||
| Lubrication | Not required | ||
| Mounting Orientation | Free | ||
| Impact resistance / Vibration resistance (m/s2*) | 150/30 | ||
| Enclosure | Dust-proof | ||
*Impact resistance: No malfunction occurred when tested using a drop tester. The test was performed once for each condition, in both energized and de-energized states, in the axial and right angle directions of the main valve/armature. (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
Solenoid Specifications
| Electrical Entry | L type (for plug-in), M plug connector (M) |
|---|---|
| Coil rated voltage (V)* | 24, 12 V DC |
| Allowable Voltage Fluctuation | ±10% of rated voltage |
| Power Consumption W | 0.6 (with light: 0.65) |
| Surge Voltage Suppressor | Diode |
| Indicator Light | LED |
*Plug-in supports 24 and 12 V DC only.
Response Time
*Based on JIS B8419:2010 dynamic performance testing (Coil temperature 20°C, at rated voltage)
| Switching Method | Response Time ms (at 0.5 MPa) | |
|---|---|---|
| Without surge voltage suppressor | With surge voltage suppressor | |
| S, Z Types | ||
| 2-position single | 12 or less | 15 or less |
| 2-position double | 10 or less | 13 or less |
| 3 Position | 15 or less | 20 or less |
| 4-position, dual 3-port valve | 30 or less | 35 or less |
Weight Table
| Valve Model Numbers | Switching Method | Piping connection port diameter | Weight g | |
|---|---|---|---|---|
| 4 (A), 2 (B) | ||||
| SZ3□60-□-C4 | 2 Position | Single | C4 (ø4 [diameter 4 mm] single-action fitting) | 78 |
| Double | 84 | |||
| 3 Position | Closed Center | 88 | ||
| Exhaust Center | ||||
| Pressure Center | ||||
| 4 Position | Dual 3-port valve | 84 | ||
| SZ3□60-□-C6 | 2 Position | Single | C6 (ø6 [diameter 6 mm] single-action fitting) | 74 |
| Double | 81 | |||
| 3 Position | Closed Center | 85 | ||
| Exhaust Center | ||||
| Pressure Center | ||||
| 4 Position | Dual 3-port valve | 81 | ||
| SZ3□60-□-M5 | 2 Position | Single | M5 × 0.8 | 69 |
| Double | 75 | |||
| 3 Position | Closed Center | 79 | ||
| Exhaust Center | ||||
| Pressure Center | ||||
| 4 Position | Dual 3-port valve | 75 | ||
Structure Drawing
2 position single structure drawing
JIS symbol for 2 position single
JIS symbol for 2-position single back-pressure check valve
2-position double structure drawing
2-position double JIS symbol
JIS symbol for 2-position double back-pressure check valve
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Zinc diecast | - |
| 2 | Adapter Plate | Resin | Urban white |
| 3 | Pilot body | Resin | Urban white |
| 4 | Molded coil | - | Urban gray |
| 5 | Body cover | Resin | Urban white |
| 6 | Spool valve assembly | Aluminum/HNBR | - |
| 7 | Port block | Resin | Urban white |
| 8 | Bottom cover assembly | - | Urban white |
| 9 | Single-action fitting | - | - |
| 10 | Clip | - | - |
*See the manufacturer's catalog for information other than that above.