5‑Port Direct Operated Solenoid Valve - Metal Seal VS4□10 Series

Brand :

SMC

Caution

Product images may be representative. Refer to the manufacturer's catalog for details.

Product Description

SMC Solenoid Valve.
[Features]
· Direct operated solenoid valve.
· · Can be used at an operating pressure starting at 0 MPa.
· The main valve structure is a metal seal type.
· Manifold type: VVS410, VVS411.

5-Port Direct Operated Solenoid Valve, Metal Seal VS4□10 Series Specifications

5-Port Direct Operated Solenoid Valve, Metal Seal VS4□10 Series external appearance

Fluid		Air, inert gases
Operating Pressure		0 to 1.0 MPa
Ambient Temperature and Operating Fluid Temperature		^*-20 to 60°C
Manual Operation		Possible
Electrical Entry		Grommet, conduit, DIN terminal Conduit with terminal
Lubrication	Not required	Possible
Lubrication	Lubrication	Turbine oil class 1 (ISO VG32)
Impact Resistance / Vibration Resistance: m/s²		^* 150 / 50
Manifold		Possible

*Use dry air (dew point: 20°C or less). If using a lubricant, use lubricant oil for low temperatures.
*Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)

Solenoid Specifications

Coil Rated Voltage	100 V / 200 V AC (50/60 Hz), 24 V DC
Allowable Voltage Fluctuation	-15% to 10% of rated voltage
Coil Insulation Type	^*1 Class B or equivalent (130°C)

*1: Based on JIS C 4003.

Model

Number of Positions	JIS Symbol	Model	Connection Port Diameter Rc (Nominal Diameter)	Flow Rate Characteristics						^*1 Maximum Operating Frequency CPM		^*2 Response Time ms		^*3 Weight kg
				P → A/B			A/B → EA/EB			^*1 Maximum Operating Frequency CPM		^*2 Response Time ms		^*3 Weight kg
				C (dm³/ [s·bar])	b	Cv	C (dm³/ [s·bar])	b	Cv	AC	DC	AC	DC	AC	DC
2 (Single)	-	VS4110-01	1/8 (6A)	3.2	0.42	0.86	3.2	0.37	0.80	1,200	180	13 or less	45 or less	0.7	0.82
		VS4110-02	1/4 (8A)	4.0	0.17	0.91	3.4	0.47	0.89
		VS4110-03	1/8 (10A)	4.1	0.19	0.96	3.9	0.35	1.00
2 (Double)	-	VS4210-01	1/8 (6A)	3.2	0.42	0.86	3.2	0.37	0.80	1,200	180	13 or less	40 or less	0.9	1.14
		VS4210-02	1/4 (8A)	4.0	0.17	0.91	3.4	0.47	0.89
		VS4210-03	1/8 (10A)	4.1	0.19	0.96	3.9	0.35	1.00
3 (3-Position)	(Closed Center)	VS4310-01	1/8 (6A)	3.1	0.37	0.80	3.2	0.35	0.82	360	180	15 or less	45 or less	0.98	1.22
		VS4310-02	1/4 (8A)	3.8	0.23	0.89	3.6	0.33	0.89
		VS4310-03	1/8 (10A)	4.2	0.23	1.00	3.8	0.32	0.99
	(Exhaust Center)	VS4410-01	1/8 (6A)	3.1	0.28	0.77	3.0	0.28	0.75	360	180	15 or less	45 or less	0.98	1.22
		VS4410-02	1/4 (8A)	3.9	0.22	0.94	3.5	0.27	0.84
		VS4410-03	1/8 (10A)	4.0	0.26	1.00	3.7	0.32	0.94

*1: The minimum operating frequency is according to JIS B 8375 (once per 30 days).
*2: Based on JIS B 8375-1981. At 0.5 MPa with no surge voltage suppressor.
*3: Electrical entry: from sub-plate.
*4: *1 and *2 assume controlled clean air.

Apparent Power (Power Consumption)

Apparent Power VA (Power Consumption W)	AC	Starting	50 Hz	51 VA (*64 VA)
		Starting	60 Hz	45 VA (*55 VA)
		Holding	50 Hz	17 VA (5.3 / 5.5 W)
		Holding	60 Hz	VA (2.9 \ 3.2 W)
Power Consumption W	DC		5.5