(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Base mounted type valve.
[Features]
· Maximum change in volume of 0.01 μL when opening or closing the valve.
· Optional power-saving circuit.
· Space saving.
[Applications]
· Ideal for various types of analytic and testing devices.
Base Mounted Type (Without Sub-Plate) external appearance
Flow Rate Characteristics
*Kv, Cv values conform to JIS B 2005:1995. C and b values conform to JIB B8390:2000.
Model | Base Mounted Type | ||||
---|---|---|---|---|---|
LVM09R3 | LVM09R4 | LVM095R | |||
Valve Structure | Diaphragm type direct acting poppet (rocker type) | ||||
Valve Type | N.C. | N.O. | Universal | ||
Number of Ports | 2 | 3 | |||
Fluids*1 | Air, water, deionized water (pure water), diluent, detergent | ||||
Operating Pressure Range | -75 kPa to 0.2 MPa | ||||
Orifice Diameter | 1.1 mm | ||||
Response Time*8 | 10 ms or less (with pneumatic pressure) | ||||
Leakage Rate | Zero for both internal and external parts (with hydraulic pressure) | ||||
Proof Pressure*2 | 0.3 MPa | ||||
Ambient Operating Temperature*9 | 0 to 50°C | ||||
Operating Fluid Temperature*9 | 0 to 50°C (no freezing) | ||||
Volume of Valve Chamber*3 | 18 μL | ||||
Mounting Orientation*4 | Free | ||||
Enclosure | IP40 equivalent | ||||
Weight | 20 g | ||||
Rated Voltage | 12, 24 V DC | ||||
Allowable Voltage Fluctuation*5 | ±10% of rated voltage | ||||
Coil Insulation Type | Class B | ||||
Power Consumption (Current: at 24‑V Rated Voltage) | Standard Type | 2 W (0.08 A) | |||
With power-saving circuit | Inrush | 3.3 W (0.14 A) | |||
Holding | 0.9 W | ||||
Coil Switching Noise*6 | 50 dB |
*1: Select an appropriate material for the wetted parts according to the type of fluid to be used. Be sure to check the chemical resistance beforehand.
*2: Indicates pressures which do not cause breakage or cracks after a 1 minute airtight test.
*3: Indicates the volume of the clearance inside the volume chamber after the volume of the diaphragm has been subtracted.
*4: As the body (orifice shape) is designed to eliminate residual liquid, mounting in a vertical orientation with the coil facing upward is recommended. If liquid pooling is not an issue, it may be installed in any orientation.
*5: If response speed is considered critical, take adequate regulations to prevent voltage fluctuations on the negative side.
*6: This value is depending on the measurement conditions and the sound level may change depending on the measurement conditions.
*7: See the SMC catalog if the valve is to be energized continuously for extended periods of time.
*8: According to JIS B8419:2010
{Value at an ambient and fluid temperature of 25°C, at rated voltage, at the maximum operating pressure (air) and when the N.C. (IN) port is pressurized}
The response time may vary depending on the supply pressure, fluid quality, piping conditions, ambient temperature, etc.
*9: Note that when the diaphragm material is Kalrez, the valve changeover time becomes significantly longer at ambient and fluid temperatures of 15°C or less in comparison to at room temperature (roughly 25°C).
LVM09R3 diagram
LVM09R4 diagram
LVM095R diagram
Component Parts: LVM09R3, 09R4, 095R
Number | Part Name | Material |
---|---|---|
1 | Plate | PEEK |
2 | Diaphragm Assembly | EPDM, FKM, Kalrez |
3 | Body | PBT |
4 | Slide Bushing Assembly | PPS, SUS |
5 | Armature Assembly | - |
6 | Coil Assembly | - |
7 | Lead Wire | - |
8 | Mold | PET |
9 | O-Ring | NBR |
10 | Interface Gasket | EPDM, FKM, Kalrez |
(Units: mm)
LVM09R3-□□-□ (N.C.) / LVM09R4-□□-□ (N.O.) / LVM095R-□□-□ (universal) dimensional drawing
*Dotted line indicates with the power-saving circuit.
LVM09R3-□□-□ (N.C.) / LVM09R4-□□-□ (N.O.) / LVM095R-□□-□ (universal) image of recommended interface dimensions
*Surface roughness for LVM09R3 and LVM095R is Rz3.2 or less / Surface roughness for LVM09R4 is Rz3.2 or less
Part Number |
---|
LVM095R-6A-6-Q |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Switching Type | Voltage | Power consumption (W) | Lead wire length (mm) | Liquid-contacting parts material | Functions | CE compliant |
---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 9,990.00 | SMC SOLENOID AIR VALVE | 1 Piece(s) | 45 Day(s) | Universal | 12 V DC | 2 | 600 | Plate: PEEK / Diaphragm: EPDM | Standard Type | CE compliant |
Loading...
Type | Electromagnetic Type | Applicable Fluid | Air / Water / Chemical | Operating Environment | Standard |
---|---|---|---|---|---|
Connection Type | Others | Driving Type | Linear Motion Type | Orifice Dia.(Ø) | 1.1 |
Operating Temperature Range(°C) | 0::50 | Body Material | Resin | Insulation Class | B |
Pipe opening type (details) | Base Mounted Type |
How can we improve?
How can we improve?