Thin-Type Digital Pressure Switch ZSE10(F)/ISE10 Series

Brand :

SMC

Caution

■ For selection / technical information and characteristics on SMC air cylinder products,
check here.

■ Handling SMC Products
Web pages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a part number.
Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Refer to the manufacturer's catalog for specification and material details.
Product images may be representative images. Refer to the manufacturer's catalog for shape details.

Product Description

Thin 9.8 mm digital pressure switch ZSE10 (F)/ISE10 Series.
[Features]
・ Up to 10 units can be copied simultaneously
・ The setting value of the master side (copy source) sensor can be copied to the slave side sensor
・ It improves visibility from multiple directions
・ Adsorption / breakdown pressure can be checked at a glance with the indicator lamp display
[Applications]
・ It is used for direct mounting / panel mounting / DIN rail mounting

Details of Thin Type Digital Pressure Switch ZSE10(F)/ISE10 Series

Product image of thin type Digital Pressure Switch ZSE10(F)/ISE10 Series

Specifications of Thin Type Digital Pressure Switch ZSE10(F)/ISE10 Series

Part Number Notation

Part number examples

Model			ZSE10 (Vacuum Pressure)	ZSE10F (Compound Pressure)	ISE10 (Positive Pressure)
Rated Pressure Range			0.0 to -101.0 kPa	-100.0 to 100.0 kPa	-0.100 to 1.000 MPa
Display / Set Pressure Range			10.0 to -105.0 kPa	-105.0 to 105.0 kPa	-0.105 to 1.050 MPa
Pressure-resistant			500 kPa	500 kPa	1.5 MPa
Display / Minimum Set Unit			0.1 kPa	0.1 kPa	0.001 MPa
Applicable Fluid			Air, non-corrosive gas, non-flammable gas
Power Supply Voltage			12 to 24 V DC　±10%, ripple (p-p) 10% or less (with reverse connection protection circuit)
Current Consumption			40 mA or less
Switch Output	-		NPN or PNP open collector output, 2 outputs
	Maximum Load Current		80 mA
	Maximum Applied Voltage		28 V (with NPN output)
	Residual Voltage		2 V or less (with load current of 80 mA)
	Response Time		2.5 ms or less (with anti-chattering function: 20, 100, 500, 1,000, 2,000 ms selectable)
	Short-circuit Protection		Equipment
Repeatability			±0.2%F.S. ±1 digit
Hysteresis	Hysteresis Mode		Variable from 0*)
Hysteresis	Window Comparator Mode		Variable from 0*)
Analog Output	Voltage Output	Output Voltage (Rated Pressure Range)	1 to 5 V ±2.5% F.S.		0.6 to 5 V ±2.5% F.S.
		Linearity	±1%F.S.
		Output Impedance	Approx. 1 kΩ
Display Method			3 1/2-digit, 7-segment LED, 1 color display (red)
Display Accuracy			±2%F.S. ±1 digit (at ambient temperature of 25　±3°C)
Operation Indicator Light			Lights when ON, OUT1: green, OUT2: red
Environmental Resistance	Protective Structure		IP40
	Operating Temperature Range		Operating: -5 to 50°C, Stored: -10 to 60°C (no condensation or freezing)
	Operating Humidity Range		Operating/stored: 35 to 85% RH (no condensation)
	Withstand voltage		1,000 V AC for 1 min. between terminals and housing
	Insulation Resistance		50 MΩ or more (500 V DC measured via ohmmeter) between terminals and housing
Temperature Characteristics			±2%F.S. (at 25°C of operating temperature range from -5 to 50°C)
Lead Wire With Connector			Oil-resistant vinyl flexible cable , 5-core conductor cross-sectional area: 0.15 mm2 (AWG26), Insulator outer diameter: 1.0 mm
Standard			CE UL／CSA (E216656)

*) If the applied voltage fluctuates around the set value, the hysteresis must be set to a value more than the width of the fluctuations or chattering will occur.

Piping Specifications

Model		M5	M5R	01	N01
Pipe Connection Port Diameter		M5　×　0.8 (side piping)	M5　×　0.8 (rear piping)	R1/8 (side piping)	NPT1/8 (side piping)
Wetted Parts Material	Sensor Pressure Receiving area	Sensor pressure receiving area: Silicone
Wetted Parts Material	Piping Port	C3604 (electroless nickel plating) O-ring: HNBR
Weight	Including Lead Wire With Connector (5 cores, 2 m)	55 g		63 g
Weight	Excluding Lead Wire With Connector	15 g		23 g

Analog Output

Voltage Output

Range	Rated Pressure Range	A	B	C
For vacuum pressure	0.0 to -101.0 kPa	-	0	-101 kPa
For compound pressure	-100.0 to 100.0 kPa	-	-100 kPa	100 kPa
For positive pressure	-0.100 to 1.000 MPa	-0.1 MPa	0	1 MPa