Filter For Industrial Use FGD Series

Brand :

SMC

Caution

The products shown in the image are representative. CAD data is not supported for some model numbers.

Product Description

Filter For Industrial Use FGD Series, suitable for small flow rates and low pressure filtration.
[Features]
· Used in multiple industries.
· Suitable for a wide range of fluids.

Filter For Industrial Use FGD Series Details

FGDT/FGDF: product images

FGDC/FGDE: product images

Filter For Industrial Use FGD Series Specifications

Model Number Notation

Model number example

*Note 1) Filters for industrial use described in the manufacturer's catalog are products in which the element is incorporated into the vessel.
*Note 2) If ordering only a vessel (replacement part) delete each symbol for "Element category," "Nominal filtration accuracy (μm)" and "Element seal material" in the previously mentioned model number naming convention.
*Note 3) For filters for industrial use, be sure to use in combination with the component parts made by the manufacturer (vessels, elements, etc.)

Specifications

Model		FGDCA	FGDCB	FGDEA	FGDEB	FGDTA	FGDTB	FGDFA	FGDFB
Port size Rc		3/8, 1/2, 3/4
Maximum operating pressure MPa ^{Note 1)}		0.7				1
Operating temperature °C		0 to 80
Number of elements		1	2 ^{Note 2)}	1	2 ^{Note 2)}	1	2 ^{Note 2)}	1	2 ^{Note 2)}
Element size, mm		ø65 to 70 (diameter 65 mm to 70 mm) × L250	ø65 to 70 (diameter 65 mm to 70 mm) × L500 (L250 × 2)	ø65 to 70 (diameter 65 mm to 70 mm) × L250	ø65 to 70 (diameter 65 mm to 70 mm) × L500 (L250 × 2)	ø65 to 70 (diameter 65 mm to 70 mm) × L250	ø65 to 70 (diameter 65 mm to 70 mm) × L500 (L250 × 2)	ø65 to 70 (diameter 65 mm to 70 mm) × L250	ø65 to 70 (diameter 65 mm to 70 mm) × L500 (L250 × 2)
Main materials ^{Note 3)}	Cover	Aluminum				SCS14
	Case	SPCE				SUS316
	Gasket · O-ring	NBR				Fluororesin
	Seal type	Nylon		Nylon/fluororesin		Fluororesin
Weight (kg)		1.3	2.2	1.3	2.2	2.3	3.8	2.3	3.8
Internal volume L		1.7	3.4	1.7	3.4	1.7	3.4	1.7	3.4

*Note 1) In the case of gases, 0.5 MPa.
*Note 2) In the case of sintered metal elements or paper elements, 1 element (ø65 (diameter 65 mm) × L500 mm).
*Note 3) The sealing performance of nylon and fluororesin seals may decrease over time. Periodically check the tightening torque specified in the instruction manual.

With differential pressure indicator (X77) / With differential pressure indication switch (X78) - Model number naming convention

With differential pressure indicator (X77) / With differential pressure indication switch (X78) - Model number example

*Refer to the model number naming convention for applicable model standard specifications.

Filter For Industrial Use FGD Series Dimensions

(Unit: mm)

Filter For Industrial Use FGD Series dimensional drawing