Non-Contact Temperature Sensor [ES1]
Brand :
OMRON
Caution
Product Description
[ES1-N]
Measures temperature without touching the workpiece. Provides hygienic and more efficient temperature management without damages.
[ES1B]
Provides low cost, non-contact temperature measurement.
[ES1C]
Provides a wide measurement range of 0 to 400°C and an excellent environmental resistance.
Dimensional Drawing of OMRON Other Temperature / Humidity Sensors
Model ES1-LP3-N/Model ES1-LP10-N Main Unit of OMRON Other Temperature / Humidity Sensors
Model ES1-LW50-N/Model ES1-LW50L-N Main Unit of OMRON Other Temperature / Humidity Sensors
(The ES1-LW50-N does not have the laser output port (6) or laser switch (7).)
Model ES1-LW100-N/Model ES1-LW100L-N Main Unit of OMRON Other Temperature / Humidity Sensors
(The ES1-LW100-N does not have the laser output port (6) or laser switch (7).)
Model ES1B of OMRON Other Temperature / Humidity Sensors
Model ES1C of OMRON Other Temperature / Humidity Sensors
Specification Table of OMRON Other Temperature / Humidity Sensors
ES1-N Ratings/Performance of OMRON Other Temperature / Humidity Sensors
ES1-N
| type | No aiming laser | With aiming laser | |||||
|---|---|---|---|---|---|---|---|
| Model number | Model ES1-LP3-N | Model ES1-LP10-N | Model ES1-LW50-N | Model ES1-LW100-N | Model ES1-LW50L-N | Model ES1-LW100L-N | |
| Detector element | Thermopile | ||||||
| lens | silicon | ||||||
| Wavelength | 8–14 μm | ||||||
| output | USB Output | Resolution: 0.1°C | |||||
| Current Output | 4~20mA/-50~500℃*1 Load impedance 250Ω or less Resolution 0.24μA | 4~20mA/-50~1,000℃*1 Load impedance 250Ω or less Resolution 0.24μA | 4~20mA/-50~500℃*1 Load impedance 250Ω or less Resolution 0.24μA | 4~20mA/-50~1,000℃ *1 Load impedance 250Ω or less Resolution 0.24μA | |||
| Power supply voltage | DC12 to 24V/USB bus power (USB bus power only, other than current output possible) | ||||||
| Allowable power supply voltage fluctuation | 95 to 105% of power supply voltage | ||||||
| Current consumption | 30mA or less (24V DC) | ・30mA or less (DC24V, when aiming laser is not used) ・40mA or less (DC24V, when aiming laser is used) | |||||
| Cable length | 2m±5cm | ||||||
| Measurement accuracy | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 500℃) Current output : Difference from USB output is within (±0.1% output range)℃ | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 1,000℃) Current output : Difference from USB output is within (±0.1% output range)℃ | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 500℃) Current output : Difference from USB output is within (±0.1% output range)℃ | USB output : Within ±(-8%rdg+1)℃ (measurement temperature: -50 to 0℃) Within ±1℃ (measurement temperature: 0 to 200℃) Within ±0.5%rdg℃ (200 to 1,000℃) Current output : Difference from USB output is within (±0.1% output range)℃ | |||
| Reproducibility | ・Within 0.5℃ | ・Within 1℃ (measurement temperature: -50 to 0℃) ・Within 0.5℃ (measurement temperature: 0 to 500℃) ・Within 1℃ (measurement temperature: 500 to 1,000℃) | ・Within 0.5℃ | ・Within 1℃ (measurement temperature: -50 to 0℃) ・Within 0.5℃ (measurement temperature: 0 to 500℃) ・Within 1℃ (measurement temperature: 500 to 1,000℃) | |||
| Temperature Drift | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) ・Within ±0.5℃/℃ (measurement temperature: 500 to 1,000℃) | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) | ・Within ±0.5℃/℃ (measurement temperature: -50 to 0℃) ・Within ±0.25℃/℃ (measurement temperature: 0 to 500℃) ・Within ±0.5℃/℃ (measurement temperature: 500 to 1,000℃) | |||
| Effects of electromagnetic interference *2 | Electromagnetic field discharge immunity | Within ±10℃ (80MHz to 1.0GHz) | |||||
| Conducted interference immunity | Within ±10℃ (150kHz to 80MHz) | ||||||
| Response Time | Current output: 0.14 s or less (95% response, moving average 1) | ||||||
| Emissivity | Factory setting: 0.95 Can be changed from 0.100 to 1.999 using the setting tool | ||||||
| Moving average function | Factory setting: 10 Can be changed from 1 to 1,000 using the setting tool | Factory setting: 50 Can be changed from 1 to 1,000 using the setting tool | Factory setting: 10 Can be changed from 1 to 1,000 using the setting tool | Factory setting: 50 Can be changed from 1 to 1,000 using the setting tool | |||
| Operating temperature and humidity range | Temperature: 0 to 55°C, Humidity: 35 to 85% (no condensation) | ||||||
| Storage Temperature Range | -20 to 55°C (no condensation) | ||||||
| Vibration resistance | malfunction | 10~55Hz 20m/s2 3 axis direction 10min | |||||
| Durability | 10 to 55Hz, half amplitude 0.75mm, 3 axial directions 2h | ||||||
| Protective structure | No | ||||||
| Compliance standards | CE, KC, FCC, RCM | ||||||
| - | IEC60825-1, PSC, FDA | ||||||
| External dimensions | W32mm×H40mm×L58mm | W32mm×H40mm×L90.3mm | W32mm×H40mm×L60.4mm | W32mm×H40mm×L92.7mm | |||
| mass | Approx. 95g | Approx. 115g | Approx. 95g | Approx. 115g | |||
| Standard accessories | Instruction manual, mounting bracket, power/output cable (2m), installation gauge | Instruction manual, mounting bracket, power/output cable (2m) | |||||
*1. The default range is 0 to +500°C. When using in -50°C to +500°C or -50°C to +1,000°C, the range must be changed using the ES1-TOOLS.
*2. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2). In this case, the measurement error is ±10°C.
Model ES1B
| item | Model number | |
|---|---|---|
| Model ES1B | ||
| Power supply voltage | DC12/24V | |
| Allowable power supply voltage fluctuation | 90% to 110% of power supply voltage | |
| Current consumption | 20mA or less | |
| Measurement Temperature Range | 10~70℃, 60~120℃, 115~165℃, 140~260℃ | |
| Accuracy*1 | ±5℃*2 | ±2%PV or ±2℃, whichever is greater |
| ±10℃*2 | ±4%PV or ±4℃, whichever is greater | |
| ±30℃*2 | ±6%PV or ±6℃, whichever is greater | |
| ±40℃*2 | ±8%PV or ±8℃, whichever is greater | |
| Reproducibility | ±1%PV or ±1℃, whichever is greater | |
| Temperature Drift | ±0.4℃/℃ or less | |
| Effects of electromagnetic interference | Field Strength Immunity | Within ±10℃ (80-800MHz) |
| Within ±30℃ (800-1000MHz) | ||
| Conducted interference immunity | ±10℃ | |
| Measurement distance: Field of view diameter | 1:1 typ. | |
| Wavelength | 6.5 to 14.0 μm | |
| Light receiving element | Thermopile | |
| Response speed | Approximately 300 ms at 63% response | |
| Output Impedance | 1 to 4 kΩ | |
| Operating Temperature Range | -25 to +70°C (no condensation or freezing) | |
| Permitted ambient humidity | Relative humidity 35-85% | |
| Vibration resistance (durability) | 98m/s2 10~55Hz 2h each in X, Y, and Z directions | |
| Impact resistance (durability) | 300m/s2 3 times each in X, Y, and Z directions | |
| Body Material | ABS resin | |
| Protective structure | IP65 | |
| Compliance standards | CE marking*3 | |
| mass | Approx. 120g | |
| Lead Wire | Compensating wire 3m | |
| PVC coating, heat resistant up to 70℃ | ||
*1.For K thermocouple characteristics and emissivity of 0.98
*2.Example of temperature change from any reference temperature of the measurement object
: When corrected to a reference temperature of 50°C, the accuracy is
the greater of ±2% PV or ±2°C at 55°C, and ±4% PV or ±4°C at 60°C.*3.EN61326-1: Industrial electromagnetic environment (EN/IEC61326-1 Table 2)
ES1C
| item | Model number | |
|---|---|---|
| Model ES1C | ||
| Power supply voltage | DC12-24V | |
| Allowable voltage fluctuation range | 90 to 110% of rated voltage | |
| Current consumption | 70mA or less | |
| Measurement Temperature Range | 0～400℃ | |
| Measurement accuracy | 0 to 200℃: ±2℃ 201 to 400℃: ±1% PV (emissivity 0.95) | |
| Effects of electromagnetic interference | Field Strength Immunity | ±10℃ max |
| Conducted interference immunity | ±10℃ max | |
| Response Time | 100ms/90% | |
| Reproducibility | ±1% of reading | |
| Wavelength | 8–14 μm | |
| Light receiving element | Thermopile | |
| Emissivity | Fixed at 0.95 | |
| Current Output | DC4 to 20mA Load 250Ω or less | |
| Ambient Temperature Range | During use: 0 to +70°C During storage: -20 to +70°C (no freezing or condensation) | |
| Ambient Humidity Range | Use/storage: Relative humidity 35-85% | |
| Vibration resistance (durability) | 10~55Hz, amplitude 1.5mm, 2h each in X, Y, and Z directions | |
| mass | 180g | |
| Protective structure | IP67 equivalent | |
| Compliance standards | CE marking* | |
*EN61326-1: Industrial electromagnetic environment (EN/IEC61326-1 Table 2)
Bill of Materials of OMRON Other Temperature / Humidity Sensors
| No. | name |
|---|---|
| (1) | lens |
| (2) | Mounting bracket screw holes |
| (3) | Tripod screw hole |
| (4) | Power output connector |
| (5) | Micro USB Connector |
| (6) | Laser output port |
| (7) | Laser Switch |
| (8) | Installation gauge fixing hole |