(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
·A two-fluid fan-shaped nozzle that produces a "fine mist" with an average particle size of 100 microns or less.
·It is a liquid pressurized type that applies a pressure of about 0.1 to 0.3 MPa to the sprayed liquid and has a wide range of flow rate adjustment.
·Three spray angles: 110°, 80°, and 45°.
·A single nozzle can be used for either an even distribution over the entire fan-shaped area, or a distribution that is strong in the center and gradually weakens toward the ends.
[Applications]
·Spraying: Mold release agent, deodorizer, oil, surface treatment agent, corrosion inhibitor, lubricant, honey, insect repellent, urea water, etc.
·Cooling: Molds, gases, steel plates, steel pieces, castings, car bodies, painted materials, sheet glass, plastics, etc.
·Humidity control: Paper, waste gas, ceramics, concrete, etc.
·Washing: Precision circuit boards, glass tubes, etc.
N type
T Type
NDB type
UNDB type
SNB type
*1 Hole for air venting.
USNB type
*1 Hole for air venting.
SPB type
*1 Hole for air venting.
USPB type
*1 Hole for air venting.
·Four parts: nozzle tip, core, cap, and adapter
·Materials: S303
Classification of air consumption | Dimensions (mm) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
L1 | L2 | L3 | L4 | L5 | L6 | a | H1 | H2 | ⌀D | |
02 | 25.3 | 16.3 | 40.8 | 24.8 | 87.3 | 66.8 | 32 | 17 | 21 | 23.5 |
04*1 | 26.8 | 17.8 | 42.3 | 26.3 | 88.8 | 68.3 | 32 | 17 | 21 | 23.5 |
BIMJ2004 | 27.0 | 18.0 | 42.5 | 26.5 | 89.0 | 68.5 | 32 | 17 | 21 | 23.5 |
075 | 28.1 | 19.1 | 43.6 | 27.6 | 90.1 | 69.6 | 32 | 17 | 21 | 23.5 |
15 | 39.1 | 26.6 | 60.1 | 38.1 | 97.6 | 77.1 | 43 | 23 | 29 | 32.5 |
22 | 41.3 | 28.8 | 62.3 | 40.3 | 99.8 | 79.3 | 43 | 23 | 29 | 32.5 |
* 1 Nozzles other than BIMJ2004.
Classification of jet angle^*2 | Classification of air consumption | Air pressure (MPa) | Injection volume (L/hr)/ air consumption (NL/minute) | Spray width (mm)^*3 | Average particle size (µm) | Contaminant passage diameter (mm) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Liquid pressure (MPa) | Liquid pressure (MPa) | Laser Doppler method | Chip Nozzle | Adapter | ||||||||||
0.1 | 0.15 | 0.2 | 0.25 | 0.3 | 0.1 | 0.15 | 0.25 | Liquid | Air | |||||
110 | 02 | 0.2 0.3 0.4 | 2.2/14 1.0/20 — | 5.3/11 2.5/19 1.4/25 | — 4.6/17 2.3/24 | — 8.3/12 4.0/23 | — 14.3/7 6.3/20 | 280 220 — | 340 250 230 | — 420 340 | 20 to 100 | 0.2 | 0.9 | 0.7 |
04 | 0.2 0.3 0.4 | 4.5/25 2.0/36 — | 9.5/20 4.7/35 2.8/45 | 17.0/13 8.5/31 4.8/44 | — 13.1/27 7.7/41 | — 19.6/20 11.4/37 | 300 230 — | 360 270 250 | — 430 350 | 20 to 100 | 0.3 | 0.9 | 0.9 | |
075 | 0.2 0.3 0.4 | 8.7/51 4.0/74 — | 18.4/42 8.8/71 5.6/91 | 33.3/29 15.5/64 9.1/89 | — 24.3/54 14.8/82 | — 38.5/40 21.8/74 | 320 240 — | 380 300 270 | — 450 370 | 20 to 100 | 0.5 | 1.2 | 1.4 | |
15 | 0.2 0.3 0.4 | 16.8/107 8.0/150 — | 34.8/90 17.7/144 11.2/190 | 64.4/60 30.8/130 18.3/183 | — 50.0/108 29.1/172 | — 74.5/87 42.9/154 | 340 270 — | 400 320 280 | — 470 380 | 20 to 100 | 0.8 | 1.8 | 1.9 | |
22 | 0.2 0.3 0.4 | 22.3/140 11.5/200 — | 45.6/116 23.9/189 15.3/245 | 92.1/77 41.3/169 24.5/238 | — 68.5/138 39.1/220 | — 107/103 57.7/198 | 350 280 — | 420 330 300 | — 490 400 | 20 to 100 | 0.9 | 2.1 | 2.2 | |
80 | 02 | 0.2 0.3 0.4 | 2.2/14 1.0/20 — | 5.3/11 2.5/19 1.4/25 | — 4.6/17 2.3/24 | — 8.3/12 4.0/23 | — 14.3/7 6.3/20 | 200 170 — | 260 210 200 | — 300 250 | 20 to 100 | 0.3 | 0.9 | 0.7 |
04 | 0.2 0.3 0.4 | 4.5/25 2.0/36 — | 9.5/20 4.7/35 2.8/45 | 17.0/13 8.5/31 4.8/44 | — 13.1/27 7.7/41 | — 19.6/20 11.4/37 | 200 170 — | 260 210 200 | — 310 260 | 20 to 100 | 0.4 | 0.9 | 0.9 | |
075 | 0.2 0.3 0.4 | 8.7/51 4.0/74 — | 18.4/42 8.8/71 5.6/91 | 33.3/29 15.5/64 9.1/89 | — 24.3/54 14.8/82 | — 38.5/40 21.8/74 | 200 170 — | 270 210 200 | — 310 260 | 20 to 100 | 0.6 | 1.2 | 1.4 | |
15 | 0.2 0.3 0.4 | 16.8/107 8.0/150 — | 34.8/90 17.7/144 11.2/190 | 64.4/60 30.8/130 18.3/183 | — 50.0/108 29.1/172 | — 74.5/87 42.9/154 | 210 180 — | 280 220 200 | — 320 270 | 20 to 100 | 0.9 | 1.8 | 1.9 | |
22 | 0.2 0.3 0.4 | 22.3/140 11.5/200 — | 45.6/116 23.9/189 15.3/245 | 92.1/77 41.3/169 24.5/238 | — 68.5/138 39.1/220 | — 107/103 57.7/198 | 210 180 — | 280 220 210 | — 330 280 | 20 to 100 | 1.1 | 2.1 | 2.2 | |
45 | 02 | 0.2 0.3 0.4 | 2.2/14 1.0/20 — | 5.3/11 2.5/19 1.4/25 | — 4.6/17 2.3/24 | — 8.3/12 4.0/23 | — 14.3/7 6.3/20 | 100 80 — | 130 110 100 | — 150 130 | 20 to 100 | 0.4 | 0.9 | 0.7 |
04 | 0.2 0.3 0.4 | 4.5/25 2.0/36 — | 9.5/20 4.7/35 2.8/45 | 17.0/13 8.5/31 4.8/44 | — 13.1/27 7.7/41 | — 19.6/20 11.4/37 | 100 80 — | 130 110 100 | — 150 130 | 20 to 100 | 0.5 | 0.9 | 0.9 | |
075 | 0.2 0.3 0.4 | 8.7/51 4.0/74 — | 18.4/42 8.8/71 5.6/91 | 33.3/29 15.5/64 9.1/89 | — 24.3/54 14.8/82 | — 38.5/40 21.8/74 | 100 80 — | 140 110 100 | — 160 140 | 20 to 100 | 0.9 | 1.2 | 1.4 | |
15 | 0.2 0.3 0.4 | 16.8/107 8.0/150 — | 34.8/90 17.7/144 11.2/190 | 64.4/60 30.8/130 18.3/183 | — 50.0/108 29.1/172 | — 74.5/87 42.9/154 | 110 90 — | 150 120 110 | — 170 150 | 20 to 100 | 1.2 | 1.8 | 1.9 | |
22 | 0.2 0.3 0.4 | 22.3/140 11.5/200 — | 45.6/116 23.9/189 15.3/245 | 92.1/77 41.3/169 24.5/238 | — 68.5/138 39.1/220 | — 107/103 57.7/198 | 110 90 — | 160 120 110 | — 180 150 | 20 to 100 | 1.6 | 2.1 | 2.2 |
* 2 The spray angle is based on a pressurized air pressure of 0.3 MPa and a liquid pressure of 0.1 MPa.
* 3 The spray width is based on a spray distance of 100 mm.
Part Number |
---|
BIMV8004S303+TS303 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Classification by Spray Angle (the spray angle under the standard atmosphere pressure) (deg) | Air consumption category | Adapter Type | Foreign Objects Pass Diameter (Chip Injection Ports) (mm) |
---|---|---|---|---|---|---|---|---|---|---|
฿ 5,349.18 | IKE SPLAY NOZZLE | 1 Piece(s) | 3 Day(s) | 10 | 80 | 04 | T Shaped | 0.4 |
Loading...
Spray Pattern | Standard Fan-Shaped | Fluid | two-fluid mixing | Material | SUS303 |
---|---|---|---|---|---|
Type | Two Fluid | Features | Fine Mist Generating | Applicable Fluid | Air, compressed air / Oil / Chemical Solution / Water / Urea Aqueous / Lubricant |
Please check the type/dimensions/specifications of the part BIMV8004S303+TS303 in the Fine Mist Generating 2-Fluid Nozzle, Small Spray Volume Flat Fan Shape, BIMV Series (Pressurized Liquid Type) series.
Part Number |
---|
BIMV11004S303+NS303 |
BIMV11004S303+TS303 |
BIMV110075S303+NS303 |
BIMV80075S303+NS303 |
BIMV80075S303+SNS303 |
BIMV80075S303+TS303 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | RoHS | Classification by Spray Angle (the spray angle under the standard atmosphere pressure) (deg) | Air consumption category | Adapter Type | Foreign Objects Pass Diameter (Chip Injection Ports) (mm) |
---|---|---|---|---|---|---|---|---|---|
฿ 6,458.79 | 1 Piece(s) | 15 Day(s) | 10 | 110 | 04 | N Shape | 0.3 | ||
฿ 5,349.18 | 1 Piece(s) | 8 Day(s) | 10 | 110 | 04 | T Shaped | 0.3 | ||
฿ 6,458.79 | 1 Piece(s) | 15 Day(s) | 10 | 110 | 075 | N Shape | 0.5 | ||
฿ 6,458.79 | 1 Piece(s) | 15 Day(s) | 10 | 80 | 075 | N Shape | 0.6 | ||
฿ 12,911.41 | 1 Piece(s) | 17 Day(s) | - | 80 | 075 | SN Type | 0.6 | ||
฿ 5,349.18 | 1 Piece(s) | Same day | 10 | 80 | 075 | T Shaped | 0.6 |
How can we improve?
How can we improve?