(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
A swing-type, tool-free, push-down clamp that can rotate the hook, clamp and unclamp via lever operation.
[Features]
· Lever type that uses a tool for rotating the hook by lever operation.
· Available in both right and left rotational specifications in 2 types: black and electroless nickel plating.
· Available surface treatments are black oxide coating and electroless nickel plating.
[Applications]
· Ideal when wishing to significantly reduce the setup time for workpieces.
· Can be used to improve work efficiency in metal machining jigs, assembly jigs, etc.
Black oxide coating type
Electroless nickel plating type
Type | Body, Lever, Adjusting Bolt | Hook | Cam Shaft | Grip |
---|---|---|---|---|
QLSWC | S45C Hardening Black oxide coating | SCM440 Hardening Black oxide coating | SCM415 Carburization Black oxide coating | Phenol resin Black |
QLSWC-NP | S45C Hardening Electroless nickel plating | SCM440 Hardening Electroless nickel plating | SCM415 Carburization Electroless nickel plating |
Left-rotating type
Right-rotating type
Dimensional drawing of point clamp (for black surfaces)
Dimensional drawing of flat clamp (for finished surfaces)
Part Number | Swivel Direction | Clamp Height - Note 1) | Clamp Stroke | Fast Feed Stroke | L2 | L3 | L1 | L4 | W | L | H5 | B | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flat Clamp (For Finished Surfaces) | Point Clamp (For Black Surfaces) | ||||||||||||||
At Min. | At Max. | At Min. | At Max. | ||||||||||||
QLSWC100R | Right | 22.8 (22.3 to 23.3) | 24.8 (24.3 to 25.3) | 22.4 (21.9 to 22.9) | 24.4 (23.9 to 24.9) | 1 | 0.8 | 22 | 6 | 26 | 11.5 | 36 | 18 | 6 | 4.3 |
QLSWC100L | Left | ||||||||||||||
QLSWC150R | Right | 31.3 (30.6 to 32) | 33.3 (32.6 to 34) | 32.2 (31.5 to 32.9) | 34.2 (33.5 to 34.9) | 1.4 | 1.1 | 30 | 8 | 35 | 15.3 | 45 | 23 | 8 | 5.3 |
QLSWC150L | Left | ||||||||||||||
QLSWC200R | Right | 32.5 (31.7 to 33.2) | 39 (38.2 to 39.7) | 33.5 (32.7 to 34.2) | 40 (39.2 to 40.7) | 1.5 | 1.4 | 37 | 45 | 20.7 | 65 | 30 | 12 | 8.4 | |
QLSWC200L | Left | ||||||||||||||
QLSWC300R | Right | 36.5 (35.5 to 37.4) | 46 (45 to 46.9) | 39 (38 to 39.9) | 48.5 (47.5 to 49.4) | 1.9 | 1.7 | 45 | 55 | 25.4 | 85 | 40 | 15 | 10.5 | |
QLSWC300L | Left |
Part Number | Dp | H | D | W1 | W2 | H3 | H2 | M | H4 | R | A | H1 | Lever Load (N) - Note 2) | Clamping Force (kN) | Clamp Mechanism |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
QLSWC100R | 27 | 49 | 18 | 8 | 4.3 | 10 | 30 | M4 × 0.7 | 22.8 | 50 | 15 | 45.8 | 100 | 1.1 | Spiral cam Cam angle 5° |
QLSWC100L | |||||||||||||||
QLSWC150R | 34 | 66 | 23 | 10 | 5.3 | 14 | 40 | M5 × 0.8 | 28.5 | 63 | 20 | 61.3 | 150 | 1.8 | |
QLSWC150L | |||||||||||||||
QLSWC200R | 48 | 82 | 30 | 16 | 8.4 | 18 | 50 | M 8 × 1.25 | 45.5 | 80 | 26 | 76.5 | 200 | 2.2 | Spiral cam Cam angle 4° |
QLSWC200L | |||||||||||||||
QLSWC300R | 64 | 100 | 40 | 20 | 10.4 | 22 | 60 | M10 × 1.5 | 57 | 100 | 33 | 93 | 300 | 3.5 | |
QLSWC300L |
Part Number | Weight (g) |
---|---|
QLSWC100R | 112 |
QLSWC100L | |
QLSWC150R | 250 |
QLSWC150L | |
QLSWC200R | 570 |
QLSWC200L | |
QLSWC300R | 1,200 |
QLSWC300L |
QLSWC (black oxide coating)
Part Number | Weight (g) |
---|---|
QLSWC100R-NP | 112 |
QLSWC100L-NP | |
QLSWC150R-NP | 250 |
QLSWC150L-NP | |
QLSWC200R-NP | 570 |
QLSWC200L-NP | |
QLSWC300R-NP | 1,200 |
QLSWC300L-NP |
QLSWC-NP (electroless nickel plating)
1. Unclamping position
The workpiece is attached and removed when the clamp is in the unclamped position.
2. Hook rotation
Turning the lever causes the hook to swing.
3. Fast feed
Turning the lever further causes the hook to fast-forward towards the workpiece.
4. Clamp
Turn the lever to clamp.
Changing the lever position
Since the lever is a 12-point wrench, its position can be changed every 30°.
The allowable load from the back per swing clamp is shown in the table on the right.
Do not exceed this load when machining the workpiece from the back side.
Size | Allowable Load From Back (Per Clamp) |
---|---|
QLSWC100 | Max. 2.3 kN |
QLSWC150 | Max. 3.6 kN |
QLSWC200 | Max. 3.7 kN |
QLSWC300 | Max. 5.6 kN |
Allowable load when machining the back surface
Part Number |
---|
QLSWC200L |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Tightening Force (Range Selectable) (N) | Surface Treatment | Swivel direction | Clamping Force (N) | Outer Diameter D (φ) | Thread Diameter M | Trusco Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 6,477.04 | CLAMPS | 1 Piece(s) | Same day | 10 | 1000~3000 | Black Oxide Coating | Left | 2200 | 30 | 8X1.25 | - |
Loading...
Type | Main Body |
---|
Please check the type/dimensions/specifications of the part QLSWC200L in the Swing Clamp (QLSWC) series.
Part Number |
---|
QLSWC100R-NP |
QLSWC150L |
QLSWC150L-NP |
QLSWC200L-NP |
QLSWC200R |
QLSWC300L |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | RoHS | Tightening Force (Range Selectable) (N) | Surface Treatment | Swivel direction | Clamping Force (N) | Outer Diameter D (φ) | Thread Diameter M | Trusco Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|
฿ 4,704.80 | 1 Piece(s) | Same day | 10 | 1000~3000 | Electroless Nickel Plating | Right | 1100 | 18 | 4X0.7 | - | ||
฿ 4,732.57 | 1 Piece(s) | Same day | 10 | 1000~3000 | Black Oxide Coating | Left | 1800 | 23 | 5X0.8 | 331-9199 | ||
฿ 5,570.63 | 1 Piece(s) | Same day | 10 | 1000~3000 | Electroless Nickel Plating | Left | 1800 | 23 | 5X0.8 | - | ||
฿ 7,867.34 | 1 Piece(s) | 13 Day(s) | 10 | 1000~3000 | Electroless Nickel Plating | Left | 2200 | 30 | 8X1.25 | - | ||
฿ 6,670.59 | 1 Piece(s) | Same day | 10 | 1000~3000 | Black Oxide Coating | Right | 2200 | 30 | 8X1.25 | - | ||
฿ 8,652.66 | 1 Piece(s) | 5 Day(s) | 10 | 3000~ | Black Oxide Coating | Left | 3500 | 40 | 10X1.5 | - |
How can we improve?
How can we improve?