What should I do when condensed gas containing moisture is drawn in?

The moisture must be removed. Some of the pump chamber parts are not water-resistant, so if water vapor is inevitably drawn in, it is effective to frequently run the pump in the open atmosphere in order to expel the interior moisture.

Is there a way to adjust the pressure and flow rate?

Pressure adjustment: If required pressure has a certain range, please select a vacuum pump that matches the required pressure. One way to adjust the pressure is to creating 'leaks.' Make a small hole in the vacuum container and adjust the pressure by changing the hole size.Tools for creating leaks are vacuum regulators, variable leak valves, etc. However, it will be a difficult and delicate task as the adjustment is made while checking the pressure gauge value, whereas there are many factors affected by the environment at that time. In some cases, it may cause the vacuum pump to malfunction, so it is recommended to check with an expert. Flow rate adjustment: One way to adjust the flow rate is to create a tube resistance. Block the pipe on the exhaust side, and adjust the flow rate by adjusting the obstacle blocking the pipe.Tools for creating pipe resistance are flow rate gauges with flow rate adjustment, or gate valves / clapper valves that can adjust opening/closing amount.

(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

DAT-100S

type CAD Days to Ship

Specification/Dimensions

type
- DAT-100S
Clear
CAD
- 2D
Clear

Days to Ship

All

40 Day(s) or Less
Clear

Specify Alterations

Dry Vacuum Pump DAT-100S, Diaphragm Type (Part Number)

Name: Dry Vacuum Pump DAT-100S, Diaphragm Type
Brand: ULVACKIKO
Availability: PreOrder

DRY VACUUM PUMP

Compare This Product

Check FAQ of this product (2)

Brand :

ULVACKIKO

From :

฿ 93,433.00/Unit
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

This is a diaphragm type dry vacuum pump.

Product TOP

: 30; 60; 90

Part Number
DAT-100S

Part Number	Price	Name	Minimum Order Qty.	Volume Discount	Days to Ship
	฿ 93,433.00	DRY VACUUM PUMP	1 Piece(s)		40 Day(s)

Basic Information

Vacuum Pump Type	Dry Type	Dry Type	Diaphragm-type	Suction Flow Rate (at 50Hz)(l/min)	100
Suction Flow Rate (at 60Hz)(l/min)	110	Ultimate Vacuum Pressure(Pa)	1~2	Power Supply	AC
Voltage (V)	100	Number of Exhaust Steps	1	Operating Environment	Standard
Gas Contact Part Surface Treatment	No	Additional Function	No	Power Consumption(W)	200
Maximum Exhaust Speed (when 50Hz)(L/min)	Single-Phase	Maximum Exhaust Speed (when 60Hz)(L/min)	1.33 x 10⁴

Please check the type/dimensions/specifications of the part DAT-100S in the Dry Vacuum Pump DAT-100S, Diaphragm Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question: What should I do when condensed gas containing moisture is drawn in?: Answer: The moisture must be removed.
Some of the pump chamber parts are not water-resistant, so if water vapor is inevitably drawn in, it is effective to frequently run the pump in the open atmosphere in order to expel the interior moisture.
Question: Is there a way to adjust the pressure and flow rate?: Answer: Pressure adjustment: If required pressure has a certain range, please select a vacuum pump that matches the required pressure. One way to adjust the pressure is to creating "leaks." Make a small hole in the vacuum container and adjust the pressure by changing the hole size.Tools for creating leaks are vacuum regulators, variable leak valves, etc. However, it will be a difficult and delicate task as the adjustment is made while checking the pressure gauge value, whereas there are many factors affected by the environment at that time. In some cases, it may cause the vacuum pump to malfunction, so it is recommended to check with an expert.
Flow rate adjustment: One way to adjust the flow rate is to create a tube resistance. Block the pipe on the exhaust side, and adjust the flow rate by adjusting the obstacle blocking the pipe.Tools for creating pipe resistance are flow rate gauges with flow rate adjustment, or gate valves / clapper valves that can adjust opening/closing amount.